Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Wavelength Dependence on the Formation of Electrically Conductive Fine Particles by Excimer Laser-Induced Ablative Photodecomposition of Monomeric Polynuclear Aromatic Solids

View through CrossRef
The reaction of reactive intermediates generated by excimer laser-induced ablative photodecomposition of solid monomers, namely, 3,4,9,10-perylenetetracarboxylic dianhydride, 3,4,9,10-perylenetetracarboxylic diimide, and 1,4,5,8-naphthalenetetracarboxylic dianhydride, yielded electrically conductive fine particles. The electrical conductivity was largely dependent on the wavelength of the lasers used. The fine particles had polymeric hydrocarbon moieties containing extended aromatic planes.
Title: Wavelength Dependence on the Formation of Electrically Conductive Fine Particles by Excimer Laser-Induced Ablative Photodecomposition of Monomeric Polynuclear Aromatic Solids
Description:
The reaction of reactive intermediates generated by excimer laser-induced ablative photodecomposition of solid monomers, namely, 3,4,9,10-perylenetetracarboxylic dianhydride, 3,4,9,10-perylenetetracarboxylic diimide, and 1,4,5,8-naphthalenetetracarboxylic dianhydride, yielded electrically conductive fine particles.
The electrical conductivity was largely dependent on the wavelength of the lasers used.
The fine particles had polymeric hydrocarbon moieties containing extended aromatic planes.

Related Results

Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Efficacy and safety of excimer light versus excimer light and 50% trichloroacetic acid in treatment of vitiligo: a clinical trial
Efficacy and safety of excimer light versus excimer light and 50% trichloroacetic acid in treatment of vitiligo: a clinical trial
Background and aim Vitiligo is a commonly acquired depigmenting disease described by continuing damage of melanocytes. The treatment of vitiligo is a general challenge....
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...
Electrowetting–induced photochemical surface modification onto fluorocarbon
Electrowetting–induced photochemical surface modification onto fluorocarbon
ABSTRACTThe PTFE was modified into hydrophilic with 1/100 of the shots number required to obtain the same contact angle with water by the laser irradiation alone, when irradiating ...
Extraction of aromatic solvents from reformates and paint solvent wastes during ionic liquids
Extraction of aromatic solvents from reformates and paint solvent wastes during ionic liquids
The work conducted in this study comprised three aspects: syntheses, characterizations, and multi-component liquid-liquid extractions. The main objectives of the project were: (1) ...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Constraining the origins of terrestrial stratospheric solid aerosols over the 1981-2020 period
Constraining the origins of terrestrial stratospheric solid aerosols over the 1981-2020 period
MotivationThe injection of materials into the Earth's atmosphere has both a natural and an anthropogenic component. Natural solid aerosols that reach the stratosphere can come from...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...

Back to Top