Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

A study on intermediate debonding for steel beams strengthened with fiber reinforced polymer plates

View through CrossRef
There are limited previous works focusing on the occurrence of intermediate debonding in steel beams strengthened with fiber reinforced polymer (FRP) plates. Tested beams in the past experiments invoked an intermediate debonding by creating notch in steel beams. An anchorage system at FRP termination points was installed on some tested beams in literature. This research uses an initial bond defect to induce an intermediate debonding at the FRP-steel interface. The bond behavior of FRP-steel interface was investigated through the FRP-steel joints under the single lap shear testing. A four-point bending test was conducted to examine the flexural properties of FRP-strengthened steel beams. The existence of initial bond defect tends to reduce an area of FRP delamination. FRP-strengthened steel beams with initial bond defect failed by FRP intermediate debonding instead of fiber rupture. The presence of initial bond defect improved both strength and ductility index of beams.
Office of Academic Resources, Chulalongkorn University
Title: A study on intermediate debonding for steel beams strengthened with fiber reinforced polymer plates
Description:
There are limited previous works focusing on the occurrence of intermediate debonding in steel beams strengthened with fiber reinforced polymer (FRP) plates.
Tested beams in the past experiments invoked an intermediate debonding by creating notch in steel beams.
An anchorage system at FRP termination points was installed on some tested beams in literature.
This research uses an initial bond defect to induce an intermediate debonding at the FRP-steel interface.
The bond behavior of FRP-steel interface was investigated through the FRP-steel joints under the single lap shear testing.
A four-point bending test was conducted to examine the flexural properties of FRP-strengthened steel beams.
The existence of initial bond defect tends to reduce an area of FRP delamination.
FRP-strengthened steel beams with initial bond defect failed by FRP intermediate debonding instead of fiber rupture.
The presence of initial bond defect improved both strength and ductility index of beams.

Related Results

Debonding Failure Analysis of Reinforced Concrete Beams Strengthened with CFRP Plates
Debonding Failure Analysis of Reinforced Concrete Beams Strengthened with CFRP Plates
In this study, experimental work was carried out on reinforced concrete (RC) beams strengthened with carbon fiber reinforced polymers (CFRP) plates. This study aims to examine the ...
Debonding Failure Analysis of Reinforced Concrete Beams Strengthened with CFRP Plates
Debonding Failure Analysis of Reinforced Concrete Beams Strengthened with CFRP Plates
In this study, experimental work was carried out on reinforced concrete (RC) beams strengthened with carbon fiber reinforced polymers (CFRP) plates. This study aims to examine the ...
Performance of steel beams strengthened with prestressed CFRP laminate
Performance of steel beams strengthened with prestressed CFRP laminate
Prestressed Carbon Fibre Reinforced Polymer (CFRP) system is generally used for strengthening reinforced concrete beams where CFRP laminate can improve both the strength and servic...
Improvement of seismic performance of ordinary reinforced partially grouted concrete masonry shear walls
Improvement of seismic performance of ordinary reinforced partially grouted concrete masonry shear walls
Reinforced masonry constitutes about 10% of all low-rise construction in the US. Most of these structures are commercial and school buildings. It may also be used for multi-story h...
Efficiency of anchorage systems for RC beams strengthened in flexure using basalt fiber reinforced polymers
Efficiency of anchorage systems for RC beams strengthened in flexure using basalt fiber reinforced polymers
Abstract Recently, Basalt Fiber Reinforced Polymer (BFRP) composites emerged as a new FRP type, in addition to the commonly used glass, carbo...
Effect of steel fiber on the shear behavior of reinforced recycled aggregate concrete beams
Effect of steel fiber on the shear behavior of reinforced recycled aggregate concrete beams
AbstractIn this research, the influence of using steel fibers on the shear action of reinforced concrete beams, made of recycled concrete aggregate (RCA), was investigated through ...
Dynamic Characteristics Analysis of Three-Layer Steel–Concrete Composite Beams
Dynamic Characteristics Analysis of Three-Layer Steel–Concrete Composite Beams
The dynamic behavior of three-layer composite beams, consisting of concrete slabs and steel beams, is influenced by the structural configuration of each layer as well as the shear ...

Back to Top