Javascript must be enabled to continue!
Influence of Portland-Limestone Cement Composition on Sulfate Attack Performance
View through CrossRef
This research evaluates the sulfate attack performance of portland-limestone cements (PLCs) with varying compositions. Mortar and paste specimens prepared by replacing Type I/II and Type V cement with 0-20% of calcitic and dolomitic limestone powders and fly ash are examined for their sulfate resistance in sodium and magnesium sulfate solutions at 5°C and 23°C by ASTM C1012 expansion measurements, an accelerated strength test, visual observations, mass loss measurements, and X-ray diffraction (XRD). Higher calcitic limestone contents increased expansion when added to Type I/II cement but decreased expansion when added to Type V cement. Strength loss was not proportional to the percentage of limestone added to the cements. Dolomitic limestone improved sulfate resistance as indicated by increased strength development in magnesium sulfate and reduced expansion in both solutions. Significant surface deterioration including cracking, bulging, and spalling was found in the paste samples at 5°C. Ettringite, thaumasite, gypsum, and brucite were the main sulfate attack phases detected at 5°C by XRD analysis.
Title: Influence of Portland-Limestone Cement Composition on Sulfate Attack Performance
Description:
This research evaluates the sulfate attack performance of portland-limestone cements (PLCs) with varying compositions.
Mortar and paste specimens prepared by replacing Type I/II and Type V cement with 0-20% of calcitic and dolomitic limestone powders and fly ash are examined for their sulfate resistance in sodium and magnesium sulfate solutions at 5°C and 23°C by ASTM C1012 expansion measurements, an accelerated strength test, visual observations, mass loss measurements, and X-ray diffraction (XRD).
Higher calcitic limestone contents increased expansion when added to Type I/II cement but decreased expansion when added to Type V cement.
Strength loss was not proportional to the percentage of limestone added to the cements.
Dolomitic limestone improved sulfate resistance as indicated by increased strength development in magnesium sulfate and reduced expansion in both solutions.
Significant surface deterioration including cracking, bulging, and spalling was found in the paste samples at 5°C.
Ettringite, thaumasite, gypsum, and brucite were the main sulfate attack phases detected at 5°C by XRD analysis.
Related Results
The cement-bone bond is weaker than cement-cement bond in cement-in-cement revision arthroplasty. A comparative biomechanical study
The cement-bone bond is weaker than cement-cement bond in cement-in-cement revision arthroplasty. A comparative biomechanical study
This study compares the strength of the native bone-cement bond and the old-new cement bond under cyclic loading, using third generation cementing technique, rasping and contaminat...
Expanding Cements for Primary Cementing
Expanding Cements for Primary Cementing
Abstract
The expansion of cement and the effect of various expansive aids upon oil well cementing compositions have been investigated to determine the amount of e...
Real-Time Distributed Fiber Optic Sensing for Cement Sheath Integrity Monitoring
Real-Time Distributed Fiber Optic Sensing for Cement Sheath Integrity Monitoring
ABSTRACT:
The integrity of cement sheath is critical to oil and gas effective extraction, in which the cement displacement efficiency and solidify quality are the...
FLY ASH FOUNDATION REINFORCED BY CEMENT–SOIL MIXING PILES
FLY ASH FOUNDATION REINFORCED BY CEMENT–SOIL MIXING PILES
Cement-soil mixing piles have been commonly used to enhance the bearing capacity of fly ash stratum and mitigate the settlement damage to the surrounding environment. However, only...
First Implementation of Self-Healing Cement Systems in H2S/CO2 Aggressive Environment Across Pay-Zone
First Implementation of Self-Healing Cement Systems in H2S/CO2 Aggressive Environment Across Pay-Zone
Abstract
Carbonate reservoirs are often characterized by high pressure and high content of H2S and CO2. For these reasons, drilling the reservoir is the most challen...
Behavior of Nano Calcium Carbonate Modified Smart Cement Contaminated with Oil Based Drilling Mud
Behavior of Nano Calcium Carbonate Modified Smart Cement Contaminated with Oil Based Drilling Mud
Abstract
As oil and gas exploration and production expands around the world, there are unique challenges in well construction beginning at the seafloor. There are se...
Effect of Limestone Addition on Physicochemical Properties of Cement: A Case Study of Laboratory Prepared Portland Cement, Sokoto Portland Cement and Dangote Portland Cement
Effect of Limestone Addition on Physicochemical Properties of Cement: A Case Study of Laboratory Prepared Portland Cement, Sokoto Portland Cement and Dangote Portland Cement
Sokoto Ordinary Portland Cement, Dangote Ordinary Portland Cement and synthesized Portland Cement were blended with various proportions of limestone. X-Ray fluorescence (XRF) studi...
Cement Evaluation - A Risky Business
Cement Evaluation - A Risky Business
Abstract
Cement evaluation is commonly thought of as running a cement bond log (CBL) and attempting to interpret the results to determine if there is isolation in th...

