Javascript must be enabled to continue!
A Study of Erosion–Cavitation Inception Synergy in Seawater Centrifugal Pumps
View through CrossRef
In pico-hydropower, the use of pumps as turbines is a cost-effective solution, especially for remote areas. The abundant seawater makes it a good fluid for pumped storage. The operation of centrifugal pumps in normal and reverse modes involves thickness loss because of solid particle concentration and vapor cavitation. Some research has been performed to predict cavitation in centrifugal pumps, but this issue still exists in several pico-hydropower plants. Therefore, to analyse the synergy between erosion and cavitation in a seawater centrifugal pump, we performed a CFD analysis to compute the effect of material mass loss due to erosion on cavitation risk. The Euler–Lagrangian method was used to track the released particles combined with the RNG k-ε turbulence model. The first part studied the effect of the surface mean roughness height (Ra) on the performance of the centrifugal pump. Increasing Ra from 0 to 15 μm decreases the pump hydraulic efficiency from 93% to 91%, respectively. The second analysis focused on the distribution of erosion thickness and its temporal evolution for 40 μm and 50 μm particles. For both the pump mode and the turbine mode, the erosion thickness is a polynomial function of power 2 with time. The most eroded regions are the blade leading edge (LE) and the blade trailing edge in pump and turbine mode, respectively. The last section focuses on analysing the effect of erosion thickness on cavitation damage. As the surface roughness increases, the cavitation damage power increases. The cavitation power risk increases from 111 kW to 156 kW in pump mode. In turbine mode, when the erosion thickness is between 0.0011 μm and 0.0022 μm, the cavitation damage is the same, approximately 170 kW, whereas the total gas distribution is uniformly distributed in the blade channel. With respect to seawater, the NPSHr increased compared with that with freshwater, from 3.35 m to 3.67 m.
Title: A Study of Erosion–Cavitation Inception Synergy in Seawater Centrifugal Pumps
Description:
In pico-hydropower, the use of pumps as turbines is a cost-effective solution, especially for remote areas.
The abundant seawater makes it a good fluid for pumped storage.
The operation of centrifugal pumps in normal and reverse modes involves thickness loss because of solid particle concentration and vapor cavitation.
Some research has been performed to predict cavitation in centrifugal pumps, but this issue still exists in several pico-hydropower plants.
Therefore, to analyse the synergy between erosion and cavitation in a seawater centrifugal pump, we performed a CFD analysis to compute the effect of material mass loss due to erosion on cavitation risk.
The Euler–Lagrangian method was used to track the released particles combined with the RNG k-ε turbulence model.
The first part studied the effect of the surface mean roughness height (Ra) on the performance of the centrifugal pump.
Increasing Ra from 0 to 15 μm decreases the pump hydraulic efficiency from 93% to 91%, respectively.
The second analysis focused on the distribution of erosion thickness and its temporal evolution for 40 μm and 50 μm particles.
For both the pump mode and the turbine mode, the erosion thickness is a polynomial function of power 2 with time.
The most eroded regions are the blade leading edge (LE) and the blade trailing edge in pump and turbine mode, respectively.
The last section focuses on analysing the effect of erosion thickness on cavitation damage.
As the surface roughness increases, the cavitation damage power increases.
The cavitation power risk increases from 111 kW to 156 kW in pump mode.
In turbine mode, when the erosion thickness is between 0.
0011 μm and 0.
0022 μm, the cavitation damage is the same, approximately 170 kW, whereas the total gas distribution is uniformly distributed in the blade channel.
With respect to seawater, the NPSHr increased compared with that with freshwater, from 3.
35 m to 3.
67 m.
Related Results
Integrated switchable ventricular assist devices for pediatric patients
Integrated switchable ventricular assist devices for pediatric patients
Thousands of children are born each year with significant cardiac defects that result in the development of heart disease and ultimately premature congestive heart failure (CHF). I...
CONVERSION OF CHARACTERISTICS OF CENTRIFUGAL PUMPS TO VISCOUS LIQUIDS
CONVERSION OF CHARACTERISTICS OF CENTRIFUGAL PUMPS TO VISCOUS LIQUIDS
The urgency of the work is due to the large use of modern industry centrifugal pumps for pumping viscous liquids. In the energy sector, this is the use of fuel oil and thermal powe...
Prediction of Cavitation Evolution and Cavitation Erosion on Centrifugal Pump Blades by the DCM-RNG Method
Prediction of Cavitation Evolution and Cavitation Erosion on Centrifugal Pump Blades by the DCM-RNG Method
Cavitation can reduce the efficiency and service life of the centrifugal pumps, and a long-term operation under cavitation conditions will cause cavitation damage on the surface of...
Research progress in hydrofoil cavitation prediction and suppression methods
Research progress in hydrofoil cavitation prediction and suppression methods
To reduce the adverse damage caused by cavitation phenomena to the hydraulic machinery, such as surface erosion of the equipment, increased mechanical vibration, and decreased serv...
Numerical Procedure for Assessment of Centrifugal Pump Cavitation Erosion
Numerical Procedure for Assessment of Centrifugal Pump Cavitation Erosion
Currently the cavitation erosion damage becomes a critical issue that limits the centrifugal pump life cycle extension. Despite of a long history of studying the cavitation erosion...
INVESTIGATION OF THE ENERGY CHARACTERISTICS OF CENTRIFUGAL PUMPS
INVESTIGATION OF THE ENERGY CHARACTERISTICS OF CENTRIFUGAL PUMPS
A hydraulic device that is used to suck up liquid, move it under pressure or pump it, is called a pump. As a rule, any movement of a liquid by similar aggregates is carried out due...
Study on the effect of seawater on making and curing of unreinforced concrete applications
Study on the effect of seawater on making and curing of unreinforced concrete applications
Concrete, an essential component of worldwide infrastructure, depends significantly on fresh water for its manufacturing, contributing to freshwater scarcity in many regions. As co...
Non-Spherical Cavitation Bubbles: A Review
Non-Spherical Cavitation Bubbles: A Review
Cavitation is a phase-change phenomenon from the liquid to the gas phase due to an increased flow velocity. As it causes severe erosion and noise, it is harmful to hydraulic machin...

