Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

How the Underlying Substrate Impacts Coating Integrity in High Temperature Sliding - A Case of Nanolayered TiAlN/TiSiN Coating

View through CrossRef
The high-temperature performance of PVD hard coatings used on hot-work tooling is strongly influenced by the thermo-mechanical stability of the underlying substrate. However, the mechanisms by which substrate degradation governs coating failure remain insufficiently discussed in literature. This study systematically investigates how substrate condition (pristine versus plasma nitrided hot-work tool steel EN X37CrMoV5-1) affects the tribological behaviour and coating integrity of an industrially deposited nanolayered TiAlN/TiSiN coating under sliding contact from room temperature to 700 °C. At temperatures up to 600 °C, the coating retained its hardness and exhibited wear rates up to one order of magnitude lower (≈10⁻⁶ mm³/Nm) than at room temperature due to protective tribo-oxide film formation. On the non-nitrided substrate, decrease of substrate hardness above 500 °C induced inter- and trans-columnar cracking within the coating. These cracks spanned across the entire thickness of the coating. As a result of cracking, steps formed on the coating’s surface which created obstacles for counterbody sliding and increased the friction coefficient to ≈ 1.2. The cracks enabled Fe–O intrusion which filled the wear tracks at 600 °C and 700 °C, reduced coefficient of friction and ultimately destroyed the coating. In contrast, plasma nitriding improved load-bearing support which eliminated crack formation, prevented Fe–O penetration, and enabled more stable friction behaviour. Coating failure occurred at 700 °C on nitrided and at 600 °C on untreated steel. The results clarify the mechanisms by which substrate degradation governs coating failure and provide guidance for designing more reliable coating/substrate systems for high-temperature applications.
Title: How the Underlying Substrate Impacts Coating Integrity in High Temperature Sliding - A Case of Nanolayered TiAlN/TiSiN Coating
Description:
The high-temperature performance of PVD hard coatings used on hot-work tooling is strongly influenced by the thermo-mechanical stability of the underlying substrate.
However, the mechanisms by which substrate degradation governs coating failure remain insufficiently discussed in literature.
This study systematically investigates how substrate condition (pristine versus plasma nitrided hot-work tool steel EN X37CrMoV5-1) affects the tribological behaviour and coating integrity of an industrially deposited nanolayered TiAlN/TiSiN coating under sliding contact from room temperature to 700 °C.
At temperatures up to 600 °C, the coating retained its hardness and exhibited wear rates up to one order of magnitude lower (≈10⁻⁶ mm³/Nm) than at room temperature due to protective tribo-oxide film formation.
On the non-nitrided substrate, decrease of substrate hardness above 500 °C induced inter- and trans-columnar cracking within the coating.
These cracks spanned across the entire thickness of the coating.
As a result of cracking, steps formed on the coating’s surface which created obstacles for counterbody sliding and increased the friction coefficient to ≈ 1.
2.
The cracks enabled Fe–O intrusion which filled the wear tracks at 600 °C and 700 °C, reduced coefficient of friction and ultimately destroyed the coating.
In contrast, plasma nitriding improved load-bearing support which eliminated crack formation, prevented Fe–O penetration, and enabled more stable friction behaviour.
Coating failure occurred at 700 °C on nitrided and at 600 °C on untreated steel.
The results clarify the mechanisms by which substrate degradation governs coating failure and provide guidance for designing more reliable coating/substrate systems for high-temperature applications.

Related Results

Microstructure and Tribological Properties of Cathodic Arc Ion Plated TiAlN and TiSiN Coatings at High Temperatures
Microstructure and Tribological Properties of Cathodic Arc Ion Plated TiAlN and TiSiN Coatings at High Temperatures
TiAlN and TiSiN coatings were deposited on YT15 cemented carbide using a cathodic arc ion plating (CAIP). The surface-cross section morphologies, chemical elements, surface roughne...
Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering
Room and High Temperature Tribological Performance of Multilayered TiSiN/TiN and TiSiN/TiN(Ag) Coatings Deposited by Sputtering
In this study, we compare the tribological performance of a multilayer TiSiN/Ti(Ag)N coating with a TiSiN/TiN coating with a similar Si content in order to demonstrate the effect o...
Evaluation of Coated Top Foil Bearings: Dry Friction, Drag Torque, and Dynamic Force Coefficients
Evaluation of Coated Top Foil Bearings: Dry Friction, Drag Torque, and Dynamic Force Coefficients
Despite their many advantages, bump-type foil bearings (BFBs) have issues of dry-friction during sliding contact at rotor start/stop cycles. To prevent premature wear of both shaft...
Hydatid Disease of The Brain Parenchyma: A Systematic Review
Hydatid Disease of The Brain Parenchyma: A Systematic Review
Abstarct Introduction Isolated brain hydatid disease (BHD) is an extremely rare form of echinococcosis. A prompt and timely diagnosis is a crucial step in disease management. This ...
Coating Processes of Pharmaceutical Applicability: A Glimpse
Coating Processes of Pharmaceutical Applicability: A Glimpse
Presentation of manuscript is aiming to furnish glimpse on coating processes. Coating is process of snugly covering substrate surface with coating materials (CoM). In due course co...
Positive Influence of Oxalate and Cyanate on the Supercapacitance Performance of V/Co 2D-Nanolayered Structures
Positive Influence of Oxalate and Cyanate on the Supercapacitance Performance of V/Co 2D-Nanolayered Structures
Two-dimensional (2D) nanolayered and nanohybrid structures, which are composed of different species of organic anions and multi-valence inorganic cations, are considered favorable ...
Wear-resistant surface coloring by ultrathin optical coatings
Wear-resistant surface coloring by ultrathin optical coatings
AbstractWe design, fabricate, optically and mechanically characterize wearable ultrathin coatings on various substrates, including sapphire, glass and silicon wafer. Extremely hard...

Back to Top