Javascript must be enabled to continue!
Anti-Multipath Performance Improvement of an M-ary Position Phase Shift Keying Modulation System
View through CrossRef
Low-Power Wide-Area Network (LPWAN) is the technology that the Internet-of-Things (IoT) uses in long-distance, wide-coverage scenarios. As one of the ultra-narrowband (UNB) modulation techniques, M-ary position phase shift keying (MPPSK) modulation can provide high coverage and high reliability for LPWAN. This paper proposes a multipath separation method based on MPPSK modulation, which aims to eliminate the influence of multipath on the main path without increasing the spectrum overhead and system complexity. Specifically, the modulation parameter of the system is adjusted according to the delay value, so that the phase jump of the multipath signal falls outside the phase jump of the main path symbol to achieve separation of the multipath from the main path. Moreover, a normalized symbol joint decision method is proposed in order to reduce the introduced noise while using multipath information for decisions. The simulation results indicate that the multipath separation conditions given in this paper can meet the requirements of multipath separation of MPPSK signals. Compared with the existing mainstream decision scheme, the normalized symbol joint decision improves the demodulation performance of the system.
Title: Anti-Multipath Performance Improvement of an M-ary Position Phase Shift Keying Modulation System
Description:
Low-Power Wide-Area Network (LPWAN) is the technology that the Internet-of-Things (IoT) uses in long-distance, wide-coverage scenarios.
As one of the ultra-narrowband (UNB) modulation techniques, M-ary position phase shift keying (MPPSK) modulation can provide high coverage and high reliability for LPWAN.
This paper proposes a multipath separation method based on MPPSK modulation, which aims to eliminate the influence of multipath on the main path without increasing the spectrum overhead and system complexity.
Specifically, the modulation parameter of the system is adjusted according to the delay value, so that the phase jump of the multipath signal falls outside the phase jump of the main path symbol to achieve separation of the multipath from the main path.
Moreover, a normalized symbol joint decision method is proposed in order to reduce the introduced noise while using multipath information for decisions.
The simulation results indicate that the multipath separation conditions given in this paper can meet the requirements of multipath separation of MPPSK signals.
Compared with the existing mainstream decision scheme, the normalized symbol joint decision improves the demodulation performance of the system.
Related Results
Pseudorange multipath at Zomba geodynamics Continuously Operating Reference Station (CORS) in Malawi
Pseudorange multipath at Zomba geodynamics Continuously Operating Reference Station (CORS) in Malawi
Multipath effects are mostly regarded as a nuisance in Global Navigation Satellite System (GNSS) receiver measurements and it is of utmost relevance to expose the magnitude this er...
Multipath Mitigation Technique Based on Successive Variational Mode Decomposition Using NAVIC Receiver Data
Multipath Mitigation Technique Based on Successive Variational Mode Decomposition Using NAVIC Receiver Data
Multipath interference poses a significant challenge in satellite-based navigation systems, including NAVIC (Navigation with Indian Constellation), degrading the accuracy of positi...
ConvGRU-MHM: a CNN GRU-enhanced MHM for mitigating GNSS multipath
ConvGRU-MHM: a CNN GRU-enhanced MHM for mitigating GNSS multipath
Abstract
In high-precision global navigation satellite system (GNSS) short-baseline positioning, multipath is the main source of errors. If the station environment i...
On the Feasibility and Applicability of Multipath Mitigation Maps as an IGS Product
On the Feasibility and Applicability of Multipath Mitigation Maps as an IGS Product
<p>Multipath is a largely unmodelled source of error and causes large range errors in Global Navigation Satellite System (GNSS) observations. The effects have strong ...
Comparison of Bit Error Rate Performance of Various Digital Modulation Schemes over AWGN and Rayleigh Fading Channels using Simulink
Comparison of Bit Error Rate Performance of Various Digital Modulation Schemes over AWGN and Rayleigh Fading Channels using Simulink
Digital modulation increases information capacity, data security, and system availability while maintaining high communication quality. As a result, digital modulation techniques a...
Satellite Communication Modulation Techniques Implemented Using SIMULINK and MATLAB
Satellite Communication Modulation Techniques Implemented Using SIMULINK and MATLAB
This paper represents the comparative study of digital modulation techniques, which are used for satellite communication in terms of BER, Power spectrum and Bandwidth. In satellite...
M-ary chaos-shift-keying system as the basis for future communications
M-ary chaos-shift-keying system as the basis for future communications
Improving spectral efficiency in future 6G mobile communications is a key global challenge. Existing technologies fall short of satisfying future mobile communication requirements....
Almost n-ary Subsemigroups and Fuzzy Almost n-ary Subsemigroups of n-ary Semigroups
Almost n-ary Subsemigroups and Fuzzy Almost n-ary Subsemigroups of n-ary Semigroups
An n-ary semigroup is a non-empty set with an associative n-ary operation. Semi-groups and ternary semigroups are special cases of n-ary semigroups where n = 2 and n = 3,respective...

