Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Droop in III-nitrides: Comparison of bulk and injection contributions

View through CrossRef
We study mechanisms which are thought to contribute to efficiency droop in III-nitrides. We first observe droop in a photoluminescence (PL) experiment on bulk GaN, which confirms the existence of a bulk contribution to droop, unrelated to piezoelectric fields or alloy fluctuations. We then perform biased-PL on a series of InGaN light-emitting diodes to estimate the potential impact of carrier leakage on PL experiments. We conclude that carrier leakage is only significant at very low pump densities and does not contribute to droop, thus validating the use of PL to characterize droop.
Title: Droop in III-nitrides: Comparison of bulk and injection contributions
Description:
We study mechanisms which are thought to contribute to efficiency droop in III-nitrides.
We first observe droop in a photoluminescence (PL) experiment on bulk GaN, which confirms the existence of a bulk contribution to droop, unrelated to piezoelectric fields or alloy fluctuations.
We then perform biased-PL on a series of InGaN light-emitting diodes to estimate the potential impact of carrier leakage on PL experiments.
We conclude that carrier leakage is only significant at very low pump densities and does not contribute to droop, thus validating the use of PL to characterize droop.

Related Results

Overview of Key Zonal Water Injection Technologies in China
Overview of Key Zonal Water Injection Technologies in China
Abstract Separated layer water injection is the important technology to realize the oilfield long-term high and stable yield. Through continuous researches and te...
Application of Novel Techniques to Fractured Injection Diagnostics in Waterflood Developments
Application of Novel Techniques to Fractured Injection Diagnostics in Waterflood Developments
Abstract Controlled injection at high rates predominantly under fracture regime has been identified at the onset of most waterflood field developments as being cruci...
Cost‐based droop scheme with lower generation costs for microgrids
Cost‐based droop scheme with lower generation costs for microgrids
In an autonomous microgrid where centralised management and communication links are not viable, droop control has been the preferred scheme for distributed generators (DGs). At pre...
Control of Water Injection into a Layered Formation
Control of Water Injection into a Layered Formation
Abstract In previously published work, we have analyzed transient injection of water from a growing vertical hydrofracture into a low-permeability compressible rock ...
Design And Operation Of The Levelland Unit CO2 Injection Facility
Design And Operation Of The Levelland Unit CO2 Injection Facility
Abstract The Levelland CO2 Facility provides CO2 storageand handling capacity for the five CO2 injection pilots located in the Levelland Unit. Facilities pilots l...
Waterflood Optimization in Nahr Umr Sandstone Reservoir in Bahrain Field Using Ensemble of Novel Analytical Techniques
Waterflood Optimization in Nahr Umr Sandstone Reservoir in Bahrain Field Using Ensemble of Novel Analytical Techniques
Abstract The Sandstone reservoir is on production since 1941. Water injection (WI) started since January 2013 and full fledge injection commenced through injectors i...
Nitrides
Nitrides
AbstractNitrides may be classified as being ionic or salt‐like, metallic, nonmetallic (diamond‐like) or volatile. The properties of transition‐metal metallic nitrides and the diamo...
Integrated Approach to Identify and Control the Water-Injection Induced Fractures in the Low-Permeability Reservoir
Integrated Approach to Identify and Control the Water-Injection Induced Fractures in the Low-Permeability Reservoir
Abstract The water-injection induced fractures are key factors influencing successful water injection development in the extra-low permeability reservoir. As water f...

Back to Top