Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
A novel on-chip three-dimensional micromachined calorimeter with fully enclosed and suspended thin-film chamber for thermal characterization of liquid samples
View through CrossRef
A microfabricated calorimeter (μ-calorimeter) with an enclosed reaction chamber is presented. The 3D micromachined reaction chamber is capable of analyzing liquid samples with volume of 200 nl. The thin film low-stress silicon nitride membrane is used to reduce thermal mass of the calorimeter and increase the sensitivity of system. The μ-calorimeter has been designed to perform DC and AC calorimetry, thermal wave analysis, and differential scanning calorimetry. The μ-calorimeter fabricated with an integrated heater and a temperature sensor on opposite sides of the reaction chamber allows to perform thermal diffusivity and specific heat measurements on liquid samples with same device. Measurement results for diffusivity and heat capacitance using time delay method and thermal wave analysis are presented.
Title: A novel on-chip three-dimensional micromachined calorimeter with fully enclosed and suspended thin-film chamber for thermal characterization of liquid samples
Description:
A microfabricated calorimeter (μ-calorimeter) with an enclosed reaction chamber is presented.
The 3D micromachined reaction chamber is capable of analyzing liquid samples with volume of 200 nl.
The thin film low-stress silicon nitride membrane is used to reduce thermal mass of the calorimeter and increase the sensitivity of system.
The μ-calorimeter has been designed to perform DC and AC calorimetry, thermal wave analysis, and differential scanning calorimetry.
The μ-calorimeter fabricated with an integrated heater and a temperature sensor on opposite sides of the reaction chamber allows to perform thermal diffusivity and specific heat measurements on liquid samples with same device.
Measurement results for diffusivity and heat capacitance using time delay method and thermal wave analysis are presented.
Related Results
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
It was always based on a teenage love story between the two kids. One is a sniffer and one is not. It was designed for Central Australia because we do write these kids off there. N...
Thermal Effects in High Compactness CEA Stack
Thermal Effects in High Compactness CEA Stack
Thermal management is a pivotal aspect of stack durability and system operability. Consequently, understanding the thermal mapping within a stack based on its operating conditions ...
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
Clonal Hematopoiesis and Incident Heart Failure
Clonal Hematopoiesis and Incident Heart Failure
Importance
Clonal hematopoiesis of indeterminate potential (CHIP), the age-related clonal expansion of hematopoietic cells with acquired preleukemic variants, h...
Comparing genome-wide chromatin profiles using ChIP-chip or ChIP-seq
Comparing genome-wide chromatin profiles using ChIP-chip or ChIP-seq
AbstractMotivation: ChIP-chip and ChIP-seq technologies provide genome-wide measurements of various types of chromatin marks at an unprecedented resolution. With ChIP samples colle...
Verification of High Speed on Chip with VIP using System Verilog
Verification of High Speed on Chip with VIP using System Verilog
Abstract - The exploration work is addressing verification of High speed on chips protocol; we've used the system Verilog grounded test bench structure. I developed a system Verilo...
Study on Cutting Chip in Milling GH4169 with Indexable Disc Cutter
Study on Cutting Chip in Milling GH4169 with Indexable Disc Cutter
The study and control for chip have a significant impact on machining quality and productivity. In this paper, GH4169 was cut with an indexable disc milling cutter. The chips corre...
Abstract 4337014: Association of Clonal Hematopoiesis with Incident Heart Failure in 360,000 Individuals
Abstract 4337014: Association of Clonal Hematopoiesis with Incident Heart Failure in 360,000 Individuals
Background:
Clonal hematopoiesis of indeterminate potential (CHIP) is the aging-related clonal expansion of hematopoietic cells with preleukemic mutations. CHIP...