Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
On the Variation of Compliance Measurements in Polymeric Solids
View through CrossRef
Polymeric solids have tensile creep compliance, compression creep compliance, flexural creep compliance, and tangential or incremental tensile and compressive compliance. While these compliance values would all be numerically the same in a given metal, they will all be numerically distinct in polymeric solids. This paper investigates why these compliance values vary in polymeric solids and presents experimental data to indicate the magnitude of this variation between several of these compliance values in iso-polyesters and vinylesters. The tensile creep compliance is found to be ∼15% greater than the flexural creep compliance in vinylesters while the incremental compliance at 3700 hours in a creep test is found to be approximately 25% less than the initial compliance on loading for iso-polyesters. The measured tensile and flexural creep compliances may be used to calculate the compressive creep compliance.
ASTM International100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959
Title: On the Variation of Compliance Measurements in Polymeric Solids
Description:
Polymeric solids have tensile creep compliance, compression creep compliance, flexural creep compliance, and tangential or incremental tensile and compressive compliance.
While these compliance values would all be numerically the same in a given metal, they will all be numerically distinct in polymeric solids.
This paper investigates why these compliance values vary in polymeric solids and presents experimental data to indicate the magnitude of this variation between several of these compliance values in iso-polyesters and vinylesters.
The tensile creep compliance is found to be ∼15% greater than the flexural creep compliance in vinylesters while the incremental compliance at 3700 hours in a creep test is found to be approximately 25% less than the initial compliance on loading for iso-polyesters.
The measured tensile and flexural creep compliances may be used to calculate the compressive creep compliance.
Related Results
Sources of Legal Regulation of Compliance in Ukrainian Banks
Sources of Legal Regulation of Compliance in Ukrainian Banks
Problem setting. The banking sector plays a crucial role in the economy and therefore needs to function in a comprehensive and effective legal environment. In order to monitor comp...
Proton Polymer Electrolytes in Fuel Cell
Proton Polymer Electrolytes in Fuel Cell
The electrolyte is one of the main parts of a fuel cell. That is divided into liquid and solid and it is used in both Alkaline and acidulous PH. But with due to kind of electrolyte...
Compliance and Airway Resistance During Anaesthesia With Controlled Ventilation
Compliance and Airway Resistance During Anaesthesia With Controlled Ventilation
SUMMARYDynamic compliance, resistance to gas flow and respiratory work were determined in 20 patients during anaesthesia and controlled ventilation with the Engström respirator. Th...
An Introspection on the need of medication compliance in geriatric patients with hypertension
An Introspection on the need of medication compliance in geriatric patients with hypertension
Introduction: Medication compliance is consequential part of treatment success. Medication non- compliance in geriatric patients leads to substantial worsening of disease, increase...
AI-Powered Tax Compliance: Enhancing Accuracy and Efficiency Through Predictive Modeling
AI-Powered Tax Compliance: Enhancing Accuracy and Efficiency Through Predictive Modeling
As compliance requirements are increasing internationally, organizations are under more scrutiny and pressure to ensure the accuracy and timeliness of their reporting obligations. ...
The impact of attitude towards an e-tax system on tax compliance of Vietnamese enterprises: Adoption of an e-tax system as a mediator
The impact of attitude towards an e-tax system on tax compliance of Vietnamese enterprises: Adoption of an e-tax system as a mediator
PURPOSE: Tax compliance is a topic of concern for many scholars all over the world. Most of them point out factors affecting tax compliance, and one significant factor is the adopt...
Evaluation of Factors Influencing Antidepressant Medication Compliance in Outpatient Treatment of Depressive Disorders in Korea
Evaluation of Factors Influencing Antidepressant Medication Compliance in Outpatient Treatment of Depressive Disorders in Korea
Objective:Medication compliance is associated with the treatment outcomes. The reported consequences of non-compliance are chronification, poor psychosocial outcomes and increased ...
The evolutionary pathway of polluted proto-planets
The evolutionary pathway of polluted proto-planets
. Introduction:In the traditional core accretion scenario, a planet grows by the subsequent accretion of a solid core and a gaseous envelope [3]. However, the accretion of these so...