Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Laser demonstration of neodymium-doped strontium chlorovanadate
View through CrossRef
Nd:Sr5(VO4)3Cl has been successfully lased using a Ti:sapphire pump laser operating at 810 nm. A slope efficiency of 52% for the 1.065 μm laser line and a lasing threshold of only a few tens of milliwatts have been measured. These favorable results are comparable to another Nd-doped vanadate apatite, Sr5(VO4)3F. A brief survey of the spectroscopy of Nd3+ in Sr5(VO4)3Cl, Sr5(VO4)3F, and Ca5(VO4)3F reveals properties which suggest the vanadate-based apatite crystals as a whole may represent a useful new class of Nd-laser hosts.
Title: Laser demonstration of neodymium-doped strontium chlorovanadate
Description:
Nd:Sr5(VO4)3Cl has been successfully lased using a Ti:sapphire pump laser operating at 810 nm.
A slope efficiency of 52% for the 1.
065 μm laser line and a lasing threshold of only a few tens of milliwatts have been measured.
These favorable results are comparable to another Nd-doped vanadate apatite, Sr5(VO4)3F.
A brief survey of the spectroscopy of Nd3+ in Sr5(VO4)3Cl, Sr5(VO4)3F, and Ca5(VO4)3F reveals properties which suggest the vanadate-based apatite crystals as a whole may represent a useful new class of Nd-laser hosts.
Related Results
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...
Management of Lower Limb Varicose Veins Using Endovenous Laser Ablation, Micro-Phlebectomy, and Sclerotherapy Using Multimodal Analgesia
Management of Lower Limb Varicose Veins Using Endovenous Laser Ablation, Micro-Phlebectomy, and Sclerotherapy Using Multimodal Analgesia
Abstract
Introduction
Previously, the conventional surgical procedure of high-ligation and saphenous stripping was commonly used to treat varicose veins (VVs). However, contemporar...
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
Laser Cladded Surface Hardening Coating With Gradient of Mechanical Properties
The present dissertation “Laser Cladded Surface Hardening Coating with Gradient of Mechanical Properties” is devoted to the research of laser cladding process for obtaining high qu...
Optical Crystals for 1.3 μm All-Solid-State Passively Q-Switched Laser
Optical Crystals for 1.3 μm All-Solid-State Passively Q-Switched Laser
In recent years, optical crystals for 1.3 μm all-solid-state passively Q-switched lasers have been widely studied due to their eye-safe band, atmospheric transmission characteristi...
Hot test of partitioning strontium from high-level liquid waste (HLLW) by dicyclohexano-18crown-6 (DCH18C6)
Hot test of partitioning strontium from high-level liquid waste (HLLW) by dicyclohexano-18crown-6 (DCH18C6)
The crown ether strontium extraction(CESE) process for partitioning strontium from HLLW was studied. A hot test was carried out in a counter current mode with genuine HLLW by using...