Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Intergranular Corrosion of Inconel Alloy 600
View through CrossRef
Abstract
The resistance of INCONEL* alloy 600 to intergranular corrosion has been investigated using oxidizing acid solutions and twenty-six thermal-mechanical treatment conditions. The corrosion damage was determined by weight loss measurements, intergranular penetration depth measurements and the degree of surface grain dislodgement. The procedures for testing and evaluating the intergranular corrosion resistance of alloy 600 are discussed. It is pointed out that care must be taken in using corrosion rates to measure the resistance to intergranular corrosion. The corrosion test results are discussed in terms of the microstructure of alloy 600.
Title: Intergranular Corrosion of Inconel Alloy 600
Description:
Abstract
The resistance of INCONEL* alloy 600 to intergranular corrosion has been investigated using oxidizing acid solutions and twenty-six thermal-mechanical treatment conditions.
The corrosion damage was determined by weight loss measurements, intergranular penetration depth measurements and the degree of surface grain dislodgement.
The procedures for testing and evaluating the intergranular corrosion resistance of alloy 600 are discussed.
It is pointed out that care must be taken in using corrosion rates to measure the resistance to intergranular corrosion.
The corrosion test results are discussed in terms of the microstructure of alloy 600.
Related Results
Evaluation of intergranular corrosion susceptibility of Super304H steel after being aged at 600°C
Evaluation of intergranular corrosion susceptibility of Super304H steel after being aged at 600°C
Abstract
The susceptibility to intergranular corrosion of as-received and 600°C aging-treated new austenite heat-resistance Super304H steel was investigated by doubl...
Two-dimensional numerical analysis of differential concentration corrosion in seawater pipeline
Two-dimensional numerical analysis of differential concentration corrosion in seawater pipeline
Purpose
The purpose of this paper is to develop a new two-dimensional differential concentration corrosion mathematical model based on the knowledge that oxygen distribution on the...
Evaluating Corrosion Inhibitors For Sour Gas Subsea Pipelines
Evaluating Corrosion Inhibitors For Sour Gas Subsea Pipelines
Abstract
Using subsea carbon steel pipelines to transport wet sour gas possesses huge challenges to the operators to maintain the high level of the Assets and Ope...
Experimental Investigation of the Corrosion Behavior of Friction Stir Welded AZ61A Magnesium Alloy Welds under Salt Spray Corrosion Test and Galvanic Corrosion Test Using Response Surface Methodology
Experimental Investigation of the Corrosion Behavior of Friction Stir Welded AZ61A Magnesium Alloy Welds under Salt Spray Corrosion Test and Galvanic Corrosion Test Using Response Surface Methodology
Extruded Mg alloy plates of 6 mm thick of AZ61A grade were butt welded using advanced welding process and friction stir welding (FSW) processes. The specimens were exposed to salt ...
Abstract PD17-12: Primary efficacy and safety results from the AMALEE trial evaluating 600 mg vs 400 mg starting doses of first-line ribociclib in patients with HR+/HER2− advanced breast cancer
Abstract PD17-12: Primary efficacy and safety results from the AMALEE trial evaluating 600 mg vs 400 mg starting doses of first-line ribociclib in patients with HR+/HER2− advanced breast cancer
Abstract
Background: In the Phase III MONALEESA (ML)-2, -3 and -7 trials, a 600 mg dose of ribociclib (RIB) demonstrated significant overall survival benefit in pati...
Investigation of Intergranular Corrosion of Alloy 825 in Sour Service
Investigation of Intergranular Corrosion of Alloy 825 in Sour Service
Abstract
Alloy 825, is a nickel base corrosion & heat resistant alloy. This alloy with austenitic matrix has been stabilized with Ti to prevent over production o...
A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718
A Study on Ultrasonic Elliptical Vibration Cutting of Inconel 718
Inconel 718 is a kind of nickel-based alloys that are widely used in the aerospace and nuclear industry owing to their high temperature mechanical properties. Cutting of Inconel 71...
Corrosion of welded joints of bimetallic composite tube in simulated offshore gas field environment
Corrosion of welded joints of bimetallic composite tube in simulated offshore gas field environment
Purpose
– The purpose of this investigation was to research the corrosion behavior of welded joints of bimetallic composite tube (X65/316L) welded with Inconel 625 ...