Javascript must be enabled to continue!
Modeling of Dual Inverter-Fed Split-Phase Interior Permanent Magnet Synchronous Machine for Electric Vehicle Traction Application
View through CrossRef
Abstract
The quest for efficient, stable, and reliable operation of power devices for electric vehicle traction has intensified over the years for improved performance. To this end, the study on dual inverter-fed split-phase Interior Permanent Magnet Synchronous Machine (IPMSM) is undertaken in order to authenticate the precise magnetic coupling between the split-phase stator winding sets and also to draw inferences on the improved performance characteristics of the machine over their traditional three-phase counterparts. This paper presents a unique and precise circuit representation of IPMSM with the inclusion of mutual slot leakage coupling inductance between the split-phase stator windings energized by two independent space vector pulse width modulated inverters for full utilization of the limited dc battery bank voltage so that the machine can run at rated volts per hertz value in order to sustain the rated load torque without the machine windings being overheated and also to prevent derating. The dynamic and steady-state equivalent circuits are derived in a unique manner. This configuration has high reliability, high torque and power densities, good efficiency, power supply security, and fault tolerance than traditional three-phase PMSM counterparts. The amplitude of current loading and stress in this scheme is 50% less than their three-phase counterparts as the current is shared between the split-phase IPMSM stator winding sets, thereby making the machine thermally stable and robust. Moreover, the current Total Harmonic Distortion (THD) spectrum, speed, and torque ripples of this scheme are also lower than their threephase counterparts. This configuration shows that the reduction in the current THD spectrum, torque, and speed ripples are 3.19%, 18.16%, and 38.89% respectively, compared to their three-phase counterparts. The results obtained in this split-phase IPMSM by q-d and steady-state analyses are remarkably in good agreement. MATLAB software simulation study proves the efficacy of this configuration.
Cite this article as: I. N. Eze, L. U. Anih, and C. U. Ogbuka, "Modeling of dual inverter-fed split-phase interior permanent magnet synchronous machine for electric vehicle traction application," Electrica, 24(3), 693-709, 2024.
AVES YAYINCILIK A.Ş.
Title: Modeling of Dual Inverter-Fed Split-Phase Interior Permanent Magnet Synchronous Machine for Electric Vehicle Traction Application
Description:
Abstract
The quest for efficient, stable, and reliable operation of power devices for electric vehicle traction has intensified over the years for improved performance.
To this end, the study on dual inverter-fed split-phase Interior Permanent Magnet Synchronous Machine (IPMSM) is undertaken in order to authenticate the precise magnetic coupling between the split-phase stator winding sets and also to draw inferences on the improved performance characteristics of the machine over their traditional three-phase counterparts.
This paper presents a unique and precise circuit representation of IPMSM with the inclusion of mutual slot leakage coupling inductance between the split-phase stator windings energized by two independent space vector pulse width modulated inverters for full utilization of the limited dc battery bank voltage so that the machine can run at rated volts per hertz value in order to sustain the rated load torque without the machine windings being overheated and also to prevent derating.
The dynamic and steady-state equivalent circuits are derived in a unique manner.
This configuration has high reliability, high torque and power densities, good efficiency, power supply security, and fault tolerance than traditional three-phase PMSM counterparts.
The amplitude of current loading and stress in this scheme is 50% less than their three-phase counterparts as the current is shared between the split-phase IPMSM stator winding sets, thereby making the machine thermally stable and robust.
Moreover, the current Total Harmonic Distortion (THD) spectrum, speed, and torque ripples of this scheme are also lower than their threephase counterparts.
This configuration shows that the reduction in the current THD spectrum, torque, and speed ripples are 3.
19%, 18.
16%, and 38.
89% respectively, compared to their three-phase counterparts.
The results obtained in this split-phase IPMSM by q-d and steady-state analyses are remarkably in good agreement.
MATLAB software simulation study proves the efficacy of this configuration.
Cite this article as: I.
N.
Eze, L.
U.
Anih, and C.
U.
Ogbuka, "Modeling of dual inverter-fed split-phase interior permanent magnet synchronous machine for electric vehicle traction application," Electrica, 24(3), 693-709, 2024.
Related Results
Research on chaos control of permanent magnet synchronous motor based on the synthetical sliding mode control of inverse system decoupling
Research on chaos control of permanent magnet synchronous motor based on the synthetical sliding mode control of inverse system decoupling
This article focuses on realizing the chaos control of a permanent magnet synchronous motor by combining a pseudo-linear inverse system of the permanent magnet synchronous motor an...
Effect of proton irradiation on microstructure evolution of permanent magnet
Effect of proton irradiation on microstructure evolution of permanent magnet
Nd2Fe14B rare earth and Sm2Co17 type permanent magnets have been widely used in the third generation of synchronous radiation light source and free electron laser facility in undul...
Coexisting Granulomatous Mastitis and Breast Cancer: A Systematic Review
Coexisting Granulomatous Mastitis and Breast Cancer: A Systematic Review
Abstract
Introduction: Granulomatous mastitis (GM) is a rare inflammatory breast disease that mimics carcinoma. GM can coexist with breast cancer (BC), though the relationship rema...
Effect of cervical suspensory traction in the treatment of severe cervical kyphotic deformity
Effect of cervical suspensory traction in the treatment of severe cervical kyphotic deformity
ObjectiveThis study aimed to investigate a new noninvasive traction method on the treatment of severe cervical kyphotic deformity.MethodsThe clinical data of patients with severe c...
Drive systems optimization in electric, hybrid and fuel cell vehicles
Drive systems optimization in electric, hybrid and fuel cell vehicles
(English) We are currently immersed in the fourth industrial revolution that involves, among others, technology to prevent climate change,
transformation of the transport sector, ...
RESEARCH OF SPEED SLIDING MODE OBSERVER FOR PERMANENT MAGNET SYNCHRONOUS MOTOR FOR ELECTRIC VEHICLE
RESEARCH OF SPEED SLIDING MODE OBSERVER FOR PERMANENT MAGNET SYNCHRONOUS MOTOR FOR ELECTRIC VEHICLE
Permanent magnet synchronous motor is the most drive motor of electric cars, to solve the problem of permanent magnet synchronous motor without position sensor speed control system...
Real-time mode of operation data analysis to catch the thread-tip denotes the failure cause of the grid-tie PV central inverter
Real-time mode of operation data analysis to catch the thread-tip denotes the failure cause of the grid-tie PV central inverter
AbstractThe inverter is considered the core of the PV power plant. The inverter’s failure leads to generation loss and decreases plant availability. So, it is required to investiga...
Effect of Parameter Modification on Torque Ripple in Interior Permanent Magnet Synchronous Motor
Effect of Parameter Modification on Torque Ripple in Interior Permanent Magnet Synchronous Motor
Electric motors are electromechanical machines commonly used in industry and automotive products. Interior Permanent Magnet Synchronous Motor (IPMSM) is a synchronous electric moto...

