Javascript must be enabled to continue!
Effect of Casting Material on the Cast Pressure After Sequential Cast Splitting
View through CrossRef
Background:
Circumferential casting is a vital component of nonoperative fracture management. These casts are commonly valved to release pressure and decrease the risk of complications from swelling. However, little information exists regarding the effect of different casting supplies on the pressure within the cast.
Methods:
Seventy-five long-arm casts were performed on human volunteers, divided between 5 experimental groups with 15 casts in each groups. Testing groups consisted of 2 groups with a plaster short-arm cast overwrapped with fiberglass to a long arm with either cotton or synthetic cast padding. The 3 remaining groups included fiberglass long-arm casts with cotton, synthetic, or waterproof cast padding. A pediatric blood pressure cuff bladder was placed within the cast and inflated to 100 mm Hg. After inflation, the cast was sequentially released with pressure reading preformed after each stage. Order of release consisted of cast bivalve, cast padding release, and cotton stockinet release. After release, the cast was overwrapped with a loose elastic bandage. Difference in pressure readings were compared based upon the cast material.
Results:
Pressures within the cast were found to decrease with sequential release of cast. The cast type had no effect of change in pressure. Post hoc testing demonstrated that the type of cast padding significantly affected the cast pressures with waterproof padding demonstrating the highest pressure readings at all time-points in the study, followed by synthetic padding. Cotton padding had the lowest pressure readings at all time-points.
Discussion:
Type of cast padding significantly influences the amount of pressure within a long-arm cast, even after bivalving the cast and cutting the cast padding. Cotton cast padding allows for the greatest change in pressure.
Clinical Relevance:
Cotton padding demonstrates the greatest change in pressure within a long-arm cast after undergoing bivalve. Synthetic and waterproof cast padding should not be used in the setting of an acute fracture to accommodate swelling.
Ovid Technologies (Wolters Kluwer Health)
Title: Effect of Casting Material on the Cast Pressure After Sequential Cast Splitting
Description:
Background:
Circumferential casting is a vital component of nonoperative fracture management.
These casts are commonly valved to release pressure and decrease the risk of complications from swelling.
However, little information exists regarding the effect of different casting supplies on the pressure within the cast.
Methods:
Seventy-five long-arm casts were performed on human volunteers, divided between 5 experimental groups with 15 casts in each groups.
Testing groups consisted of 2 groups with a plaster short-arm cast overwrapped with fiberglass to a long arm with either cotton or synthetic cast padding.
The 3 remaining groups included fiberglass long-arm casts with cotton, synthetic, or waterproof cast padding.
A pediatric blood pressure cuff bladder was placed within the cast and inflated to 100 mm Hg.
After inflation, the cast was sequentially released with pressure reading preformed after each stage.
Order of release consisted of cast bivalve, cast padding release, and cotton stockinet release.
After release, the cast was overwrapped with a loose elastic bandage.
Difference in pressure readings were compared based upon the cast material.
Results:
Pressures within the cast were found to decrease with sequential release of cast.
The cast type had no effect of change in pressure.
Post hoc testing demonstrated that the type of cast padding significantly affected the cast pressures with waterproof padding demonstrating the highest pressure readings at all time-points in the study, followed by synthetic padding.
Cotton padding had the lowest pressure readings at all time-points.
Discussion:
Type of cast padding significantly influences the amount of pressure within a long-arm cast, even after bivalving the cast and cutting the cast padding.
Cotton cast padding allows for the greatest change in pressure.
Clinical Relevance:
Cotton padding demonstrates the greatest change in pressure within a long-arm cast after undergoing bivalve.
Synthetic and waterproof cast padding should not be used in the setting of an acute fracture to accommodate swelling.
Related Results
Unveiling the third dimension of glass
Unveiling the third dimension of glass
Glass as a material has always fascinated architects. Its inherent transparency has given us the ability to create diaphanous barriers between the interior and the exterior that al...
Aluminum Shape Casting
Aluminum Shape Casting
Abstract
Aluminum casting alloys are the most versatile of all common foundry alloys and generally have the highest castability ratings. This article provides an ove...
Special Issue on Casting Technology Automation and Control
Special Issue on Casting Technology Automation and Control
Kazuhiko Terashima, p. 227
Simple, low-cost casting technology is essential to transforming materials into products that are used for important components in the automobile, pre...
Article Review: Analisis Jenis-Jenis Teknik Pengecoran Logam Berdasarkan Jenis Cetakannya
Article Review: Analisis Jenis-Jenis Teknik Pengecoran Logam Berdasarkan Jenis Cetakannya
Pengecoran logam adalah salah satu metode untuk pembuatan suatu benda. Ditinjau dari jenis cetakan nya dapat digolongkan menjadi metode pengecoran cetakan tetap dan metode pengecor...
Some specifics of the billet open and submerged stream casting
Some specifics of the billet open and submerged stream casting
Experimental series of steel casting were carried out to determine the effect of the continuous casting method on the fre-quency of defects formation in billets. At the same time, ...
Functional and aesthetic comparison of lower lip split incisions and modification of McGregor incision. (Preprint)
Functional and aesthetic comparison of lower lip split incisions and modification of McGregor incision. (Preprint)
BACKGROUND
The open mouth provided the basis for various surgical approaches to tumours of the oral cavity(1). If this access is inadequate it is generally ...
Management of Distal 1/3rd Closed Forearm Fractures in Children above Elbow Plaster Cast versus Below Elbow Plaster Cast
Management of Distal 1/3rd Closed Forearm Fractures in Children above Elbow Plaster Cast versus Below Elbow Plaster Cast
Objective: To determine if below-elbow casts are as effective as above-elbow casts in the treatment of the distal third closed forearm fractures in children.
Materials and Me...
Study on Continuous Casting of Steel by Sizes
Study on Continuous Casting of Steel by Sizes
Continuous casting of steel has gradually replaced traditional casting, due to many advantages such as: casting to a close form to the finished product, low steel losses, the possi...

