Javascript must be enabled to continue!
Soil structure, soil hydraulic properties and the soil water balance
View through CrossRef
We review the influence of soil structural change on the fundamental soil hydraulic properties (unsaturated hydraulic conductivity and the soil moisture characteristic) and utilize deterministic modelling to assess subsequent effects on the soil water balance. Soil structure is reflected in the 0 to -100 kPa matric potential section of the soil moisture characteristic with marked changes often occurring in light to medium textured soils' (sands, sandy-loam, loams and clay-loams). The effect of long-term tillage on soil structure may decrease hydraulic conductivity within this matric potential range. The 'SWIM' (Soil Water Infiltration and Movement) simulation model was used to illustrate the effects of long-term conventional tillage and direct drilling systems on the water balance. The effects of plough pans, surface crusts and decreasing surface detention were also investigated. Significant structural deterioration, as evidenced by substantially reduced hydraulic conductivity, is necessary before significant runoff is generated in the low intensity rainfall regime of the Southern Tablelands (6 min rainfall intensity <45 mm h-1). A 10 mm thick plough pan (at a depth of 100 mm) in the A-horizon of a long-term conventionally tilled soil required a saturated hydraulic conductivity (K,) of less than 2.5 mm h-1 before runoff exceeded 10% of incident rainfall in this rainfall regime. Similarly, a crust K, of less than 2.5 mm h-1 was necessary before runoff exceeded 10% of incident rainfall (provided that surface detention was 2 or more). As the crust K, approached the rainfall rate, small decreases in Ks resulted in large increases in runoff. An increase in surface detention of 1 to 3 mm resulted in a large reduction in runoff where crust K, was less than 2-5 mm h-1. Deterministic simulation models incorporating well established physical laws are effective tools in the study of soil structural effects on the field water regime. Their application, however, is constrained by insufficient knowledge of the fundamental hydraulic properties of Australian soils and how they are changing in response to our land management.
Title: Soil structure, soil hydraulic properties and the soil water balance
Description:
We review the influence of soil structural change on the fundamental soil hydraulic properties (unsaturated hydraulic conductivity and the soil moisture characteristic) and utilize deterministic modelling to assess subsequent effects on the soil water balance.
Soil structure is reflected in the 0 to -100 kPa matric potential section of the soil moisture characteristic with marked changes often occurring in light to medium textured soils' (sands, sandy-loam, loams and clay-loams).
The effect of long-term tillage on soil structure may decrease hydraulic conductivity within this matric potential range.
The 'SWIM' (Soil Water Infiltration and Movement) simulation model was used to illustrate the effects of long-term conventional tillage and direct drilling systems on the water balance.
The effects of plough pans, surface crusts and decreasing surface detention were also investigated.
Significant structural deterioration, as evidenced by substantially reduced hydraulic conductivity, is necessary before significant runoff is generated in the low intensity rainfall regime of the Southern Tablelands (6 min rainfall intensity <45 mm h-1).
A 10 mm thick plough pan (at a depth of 100 mm) in the A-horizon of a long-term conventionally tilled soil required a saturated hydraulic conductivity (K,) of less than 2.
5 mm h-1 before runoff exceeded 10% of incident rainfall in this rainfall regime.
Similarly, a crust K, of less than 2.
5 mm h-1 was necessary before runoff exceeded 10% of incident rainfall (provided that surface detention was 2 or more).
As the crust K, approached the rainfall rate, small decreases in Ks resulted in large increases in runoff.
An increase in surface detention of 1 to 3 mm resulted in a large reduction in runoff where crust K, was less than 2-5 mm h-1.
Deterministic simulation models incorporating well established physical laws are effective tools in the study of soil structural effects on the field water regime.
Their application, however, is constrained by insufficient knowledge of the fundamental hydraulic properties of Australian soils and how they are changing in response to our land management.
Related Results
[RETRACTED] Guardian Blood Balance –Feel the difference Guardian Blood Balance makes! v1
[RETRACTED] Guardian Blood Balance –Feel the difference Guardian Blood Balance makes! v1
[RETRACTED]Guardian Blood Balance Reviews (Works Or Hoax) Does Guardian Botanicals Blood Balance AU Really Works? Read Updated Report! Diabetes and Hypertension is such a health p...
VOLUMETRIC RIGIDITY OF HYDRAULIC SYSTEMS
VOLUMETRIC RIGIDITY OF HYDRAULIC SYSTEMS
A hydraulic drive is a set of interacting hydraulic devices that is designed to be ghosted by means of a working fluid under pressure. The main element in hydraulic drives most mac...
Predicting water balance in a sandy soil: model sensitivity to the variability of measured saturated and near saturated hydraulic properties
Predicting water balance in a sandy soil: model sensitivity to the variability of measured saturated and near saturated hydraulic properties
Water balance modelling based on Richards’ equation requires accurate description of the soils’ hydraulic parameters. Unfortunately, these parameters vary spatially and temporally ...
Perspectives of Unconventional Water Sources Implementation in Hydraulic Fracturing
Perspectives of Unconventional Water Sources Implementation in Hydraulic Fracturing
Abstract
Currently, Russia experienced a rapid growth in horizontal wells drilling. The most popular method of completion is hydraulic fracturing. About 99% of hydra...
Ecosystem scale evapotranspiration is controlled by small scale processes and soil hydraulic properties
Ecosystem scale evapotranspiration is controlled by small scale processes and soil hydraulic properties
The upscaling of hydrologic processes at catchment scale from small scale soil hydraulic parameterization has been met with limited success. For example, spatially variable attribu...
Use of Formation Water and Associated Gases and their Simultaneous Utilization for Obtaining Microelement Concentrates Fresh Water and Drinking Water
Use of Formation Water and Associated Gases and their Simultaneous Utilization for Obtaining Microelement Concentrates Fresh Water and Drinking Water
Abstract Purpose: The invention relates to the oil industry, inorganic chemistry, in particular, to the methods of complex processing of formation water, using flare gas of oil and...
Mechanical testing of hydraulic fluids
Mechanical testing of hydraulic fluids
AbstractThe antiwear properties of hydraulic fluids are important because hydraulic pump and motor wear is costly. While international hydraulic fluid performance standards continu...
Study of Damage Evaluation of Hydraulic Fracturing to Reservoirs
Study of Damage Evaluation of Hydraulic Fracturing to Reservoirs
Abstract
Classic hydraulic fracturing analysis is based on tensile strength of rock, failure criteria of fracture mechanics or Mohr-Coulomb criteria. The existing...

