Javascript must be enabled to continue!
Crustal Structure and Earthquakes beneath the Jammu and Kashmir Himalaya
View through CrossRef
<p align="justify"><span>We use P-wave receiver function (P-RF) analysis of broadband teleseismic data recorded at twenty two stations spanning the Jammu-Kishtwar Himalaya, Pir Panjal Ranges, Kashmir Valley, and Zanskar Ranges in Northwest Himalaya to model the seismic velocity structures of the crust and the uppermost mantle. Our network extends from the Shiwalik Himalaya (S) to the Tethyan Himalaya (N), across the major Himalayan thrust systems and litho-tectonic units. We perform Vp/Vs-Depth stacking of P-RF and joint inversion with surface wave dispersion data. Our analysis show that the underthrust Indian crust, beneath the Jammu-Kishtwar Himalaya, has an average thickness of ~40 km and dips northward at ~7-9&#186;. The overlying Himalayan wedge increases in thickness northward from the Shiwalik Himalaya (~8&#8211;10 km) to the Tethyan Himalaya (~25&#8211;30 km). The underthrust Indian crust Moho is marked by a large positive impedance contrast and lies at a depth of ~45 km beneath the Shiwalik Himalaya and ~65 km beneath the Higher Himalaya, deepening northward beneath the Tethyan Himalaya. We observe Moho flexure across the Mandli-Kishanpur Thrust (MKT), in the Shiwalik Himalaya, and beneath the Kishtwar window. Each time to Moho deepens by ~10 km, from ~45 km to ~55 km, and from ~55 km to ~65 km, respectively. The Moho is remarkably flat at ~56 km beneath the Pir Panjal Ranges, from its southern foothills to the northern flank in the Kashmir Valley. North of the Kashmir Valley the Moho dips steeply underneath the Zanskar Ranges from ~56 km to ~62 km. Along the Jammu-Kishtwar common conversion point (CCP) profile the Main Himalayan Thrust (MHT) is highlighted by the low velocity layer (LVL) at a depth of ~8 km beneath the Shiwalik Himalaya to ~25 km beneath the Higher Himalaya. The average dip on the MHT is ~9&#186; and has a frontal ramp beneath the Kishtwar window. The MKT, MBT and MCT are marked by LVLs which splays updip from the MHT. Average crustal Vp/Vs shows that beneath the Shiwalik Himalaya, west of the MFT anticline the crust is mafic in nature while towards the east the crust is felsic in nature. Beneath the Lesser Himalaya the crust is largely felsic, while beneath the Pir Panjal range the crust is intermediate to mafic. North of the Kashmir Valley, beneath the Zanskar range the crust is felsic to intermediate in nature. We compare the source mechanism of the 2013 Kishtwar earthquake (Mw 5.7) and hypocentral location of small-to-moderate earthquake beneath Kishtwar region with the CCP profile. Our results show that these earthquakes occurred on or above the MHT in the unlocking zone, between the frictionally locked shallow segment and deeper creeping segment of the MHT. This marks the zone of stress build-up on the MHT in the interseismic period and is possibly the zone of megathrust initiation.</span></p>
Title: Crustal Structure and Earthquakes beneath the Jammu and Kashmir Himalaya
Description:
<p align="justify"><span>We use P-wave receiver function (P-RF) analysis of broadband teleseismic data recorded at twenty two stations spanning the Jammu-Kishtwar Himalaya, Pir Panjal Ranges, Kashmir Valley, and Zanskar Ranges in Northwest Himalaya to model the seismic velocity structures of the crust and the uppermost mantle.
Our network extends from the Shiwalik Himalaya (S) to the Tethyan Himalaya (N), across the major Himalayan thrust systems and litho-tectonic units.
We perform Vp/Vs-Depth stacking of P-RF and joint inversion with surface wave dispersion data.
Our analysis show that the underthrust Indian crust, beneath the Jammu-Kishtwar Himalaya, has an average thickness of ~40 km and dips northward at ~7-9&#186;.
The overlying Himalayan wedge increases in thickness northward from the Shiwalik Himalaya (~8&#8211;10 km) to the Tethyan Himalaya (~25&#8211;30 km).
The underthrust Indian crust Moho is marked by a large positive impedance contrast and lies at a depth of ~45 km beneath the Shiwalik Himalaya and ~65 km beneath the Higher Himalaya, deepening northward beneath the Tethyan Himalaya.
We observe Moho flexure across the Mandli-Kishanpur Thrust (MKT), in the Shiwalik Himalaya, and beneath the Kishtwar window.
Each time to Moho deepens by ~10 km, from ~45 km to ~55 km, and from ~55 km to ~65 km, respectively.
The Moho is remarkably flat at ~56 km beneath the Pir Panjal Ranges, from its southern foothills to the northern flank in the Kashmir Valley.
North of the Kashmir Valley the Moho dips steeply underneath the Zanskar Ranges from ~56 km to ~62 km.
Along the Jammu-Kishtwar common conversion point (CCP) profile the Main Himalayan Thrust (MHT) is highlighted by the low velocity layer (LVL) at a depth of ~8 km beneath the Shiwalik Himalaya to ~25 km beneath the Higher Himalaya.
The average dip on the MHT is ~9&#186; and has a frontal ramp beneath the Kishtwar window.
The MKT, MBT and MCT are marked by LVLs which splays updip from the MHT.
Average crustal Vp/Vs shows that beneath the Shiwalik Himalaya, west of the MFT anticline the crust is mafic in nature while towards the east the crust is felsic in nature.
Beneath the Lesser Himalaya the crust is largely felsic, while beneath the Pir Panjal range the crust is intermediate to mafic.
North of the Kashmir Valley, beneath the Zanskar range the crust is felsic to intermediate in nature.
We compare the source mechanism of the 2013 Kishtwar earthquake (Mw 5.
7) and hypocentral location of small-to-moderate earthquake beneath Kishtwar region with the CCP profile.
Our results show that these earthquakes occurred on or above the MHT in the unlocking zone, between the frictionally locked shallow segment and deeper creeping segment of the MHT.
This marks the zone of stress build-up on the MHT in the interseismic period and is possibly the zone of megathrust initiation.
</span></p>.
Related Results
Crustal Structure of the Jammu and Kashmir Himalaya
Crustal Structure of the Jammu and Kashmir Himalaya
We use P-wave receiver function (P-RF) analysis of broadband teleseismic data recorded at twenty stations spanning the Jammu-Kishtwar Himalaya, Pir Panjal Ranges, Kashmir Valley, a...
Avifaunal diversity of Northwestern Himalayas (Jammu and Kashmir) and Trans Himalayas (Ladakh) of India
Avifaunal diversity of Northwestern Himalayas (Jammu and Kashmir) and Trans Himalayas (Ladakh) of India
Abstract. Yousuf P, Parvaiz S, Zehbi N, Altaf S, Zargar BN, Rather R, Tantray J, Lateef M. 2023. Avifaunal diversity of Northwestern Himalayas (Jammu and Kashmir) and Trans Himalay...
Avifaunal Diversity of Northwestern Himalayas (Jammu & Kashmir) and Trans Himalayas (Ladakh)
Avifaunal Diversity of Northwestern Himalayas (Jammu & Kashmir) and Trans Himalayas (Ladakh)
Abstract
The Himalayas are home to a wide variety of animals and plants, making it one of the world's most biodiverse regions. Both the northwestern Himalayan region of Jam...
Political Culture in Kashmir: 1930–1990
Political Culture in Kashmir: 1930–1990
Summary
The 20th century, especially the post-1930s, represents a period of critical transformation in the Kashmir’s political landscape, marked by the rise of po...
Episodic Crustal Deformation of Northeastern North China Craton and Its Adjacent Areas: New Constraints from Receiver Function Analysis
Episodic Crustal Deformation of Northeastern North China Craton and Its Adjacent Areas: New Constraints from Receiver Function Analysis
Abstract
The northeastern North China craton (NCC) has undergone strong crustal deformation and magmatic activities since the Late Mesozoic. To understand the mec...
Articles 370 and 371 of the Indian Constitution in the Context of Kashmir
Articles 370 and 371 of the Indian Constitution in the Context of Kashmir
Occupied Jammu and Kashmir is not the only state in the Indian constitution with special status but in addition to Article 370, there is also an Article 371 in the Indian Constitut...
SEGMENTATION OF CRUSTAL VELOCITY STRUCTURE BENEATH THE SHANDONG‐JIANGSU‐ANHUI SEGMENT OF THE TANLU FAULT ZONE AND ADJACENT AREAS AND ITS GEOLOGICAL INTERPRETATIONS
SEGMENTATION OF CRUSTAL VELOCITY STRUCTURE BENEATH THE SHANDONG‐JIANGSU‐ANHUI SEGMENT OF THE TANLU FAULT ZONE AND ADJACENT AREAS AND ITS GEOLOGICAL INTERPRETATIONS
AbstractThe Yishu segment of the Tanlu fault zone is the seismogenic structure of the 1668 Tancheng M8½ earthquake, and is also the research focus of the potential strong earthquak...
Crustal Seismic Structure in Jammu and Kashmir Region, India
Crustal Seismic Structure in Jammu and Kashmir Region, India
Abstract
A seismic line was recorded in the Jammu-Kashmir region, during the year 1978, as part of the International Pamir-Himalayan project. The data available o...

