Mechanical Properties and Fatigue Life Evaluation under High Temperature and Shot Peening Application using AA7001

In some applications, AA7001 may be subjected to high temperature and fatigue. This interaction leads to varying the mechanical and fatigue properties of the above alloy. This work deals with the effects of tensile properties and constant fatigue amplitude performance. Aluminum alloys have a low specific strength, are simple to produce, and are lightweight, which has made them popular in the construction, automotive, marine, and aviation industries. The history of stress and temperature applied to the component has a significant impact on the time-dependent process of creep and strain damage. The purpose of this research is to investigate the behavior of AA7001-T6 when two phenomena, high temperatures creep and fatigue, are combined. Compared to the fatigue life interaction employing shot peening thereby, the fatigue lifetimes were The influence of shot peening on the mechanical and fatigue characteristics of AA7001-T6 was investigated utilizing four different temperatures, including RT, SP+RT, 330°C, and SP+330°C. It has been observed The application of 330°C to the tensile process lowered the ultimate tensile strength of UTS and YS by 21.9 % and 22.3 %, respectively. Shot peening improved the aforesaid percentage, lowering it to 19.2 % and 19.7%, respectively. At a stress level of 400MPa, fatigue life was lowered by 18.18 % owing to an increased temperature of 330°C, and this percentage was reduced to 10.16 % due to creating the compressive residual stresses (CRS) (SP). At (RT), the fatigue strength (endurance fatigue limit) was 229 MPa, but after Shot Peening, it improved to 237 MPa. At 330°C, shot peening increased the improved fatigue limit from 217MPa to 229MPa, resulting in a 5.24 % improvement.