Preparation of amphiphilic block copolymers (polyethylene adipate-block-polyethylene glycol) and its application in rotogravure ink formulations

PurposeThe purpose of this paper is to prepare amphiphilic block copolymers polyethylene adipate-block-polyethylene glycol (PEA-b-PEG)s and study their performance as plasticizers in rotogravure ink formulations.Design/methodology/approachSeries of amphiphilic block copolymers (PEA-b-PEG1), (PEA-b-PEG2), (PEA-b-PEG3), (PEA-b-PEG4) and (PEA-b-PEG5) were prepared by the reaction of adipic acid, ethylene glycol and polyethylene glycol of different molecular weights (300, 1,000, 2,000, 10,000 and 20,000 g/mol), respectively. Full characterization of the prepared copolymers was achieved using Fourier Transfer Infrared Spectroscopy (FTIR), 1H NMR, thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The performance of the prepared copolymers as plasticizers for neat nitrocellulose resin were studied in different formulations, namely, R1, R2, R3, R4 and R5 containing copolymers (PEA-b-PEG1), (PEA-b-PEG2), (PEA-b-PEG3), (PEA-b-PEG4) and (PEA-b-PEG5), respectively. In addition to formula R0 that contains acetyl tributyl citrate (ATBC) as a commercial plasticizer. The mechanical properties, thermal analysis (DSC, TGA) and optical properties of the prepared formulations films were investigated. Theses amphiphilic block copolymers were then applied as plasticizers in different rotogravure ink formulations (F1, F2, F3, F4 and F5) and compared with commercial rotogravure ink formula (F0). The color measurements and optical properties of all formulations were achieved.FindingsIt was found that the performance of the prepared copolymers as plasticizers in different formulations based on nitro cellulose resin gives better gloss, adhesion for R1 compared with the other samples and color strength for F1 compared with F0. Finally, all the samples gave excellent plasticizing effect.Research limitations/implicationsThe authors believe that type of these materials open the way for a new class of plasticizers that upon application or even degradation gives small ecofriendly molecules (adipic acid and or ethylene glycol moieties) taking into consideration the simplicity of the rout of the synthesis process.Practical implicationsThe prepared ecofriendly (PEA-b-PEG)s could be successfully used as plasticizers instead of commercial plasticizer ATBC.Originality/valueThe research provides that the prepared (PEA-b-PEG)s with different molecular weights can act as plasticizers in rotogravure ink formulations, and their performance was acceptable and available.