Grain Shape Effect and the Viscoplastic Parameter on the Evolution of Isotropic and Kinematic Hardening of Metallic Materials under Cyclic Loading

The main objective of this work is to study the grain shape effect (aspect ratio α = a / b) and the viscoplastic parameter γ on the evolution of the kinematic and isotropic hardening of FCC type metallic materials, under uniaxial cyclic Tension-Compression ‘‘TC’ and to interpret these results. These parameters of shape and viscoplastic were developed and introduced by Abdul-Latif and Radi, indeed in this study we use their model. Expressed within the framework of a self-consistent approach, the rate-dependent inelastic strain is examined at the crystallographic slip system level describing a constitutive model for FCC metallic polycrystals, whereas the elastic strain is determined at the granular level. Based on the Eshelby’s tensor, the elastic behavior is assumed to be compressible. For a polycrystalline structure, the grains deform plastically by crystallographic slip located at the most favorably oriented systems supporting a high resolved shear stress . The approach considers that the inclusion (grain) form is ellipsoidal of half axes defining by a, b and c such as a ≠b= c. Several numerical tests are carried out highlighting the role of shape and viscoplastic parameter on the evolution of kinematic and isotropic hardening. A general comparison between the and effect on the overall hardening of the polycrystal shows that this work hardening is more sensitive to the parameter (for given ) compared to (for given). Keywords: Grain shape effect, Ellipsoidal inclusion, Viscoplastic parameter effect, Kinematic and isotropic hardening, Uniaxial cyclic ‘‘TC‘‘, Self-consistent model.