Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Resin Mould for Ceramic Slip Rotary Moulding (CSRM) System
View through CrossRef
A type of porous resin was proposed to replace the existing plaster mould for Ceramic Slip Rotary Moulding (CSRM) system. The proposed resin is often used in high pressure casting of ceramic sanitary ware and table ware. The effect of resin mould in terms of mechanical strength (flexural properties), porosity percentage and percentage of water absorption as well as moulding process were recorded and compared with previous studies of plaster mould. Five (5) samples of porous resin were prepared according to ASTM 790 for flexural test and ASTM D570 for water absorption test. To determine the porosity percentage, mercury porosimeter test was conducted. The result shows that higher the water plaster ratio resultant in higher porosity percentage and water absorption. The result showed that, the proposed porous resin has great potential in replacing plaster mould as mould material for CSRM system. The mould has a uniform open pore to enable the filtration process to take place within the mould and the slip and has a great mechanical strength. However, porous resin is still a semi-permanent mould with definite service life.
Trans Tech Publications, Ltd.
Title: Resin Mould for Ceramic Slip Rotary Moulding (CSRM) System
Description:
A type of porous resin was proposed to replace the existing plaster mould for Ceramic Slip Rotary Moulding (CSRM) system.
The proposed resin is often used in high pressure casting of ceramic sanitary ware and table ware.
The effect of resin mould in terms of mechanical strength (flexural properties), porosity percentage and percentage of water absorption as well as moulding process were recorded and compared with previous studies of plaster mould.
Five (5) samples of porous resin were prepared according to ASTM 790 for flexural test and ASTM D570 for water absorption test.
To determine the porosity percentage, mercury porosimeter test was conducted.
The result shows that higher the water plaster ratio resultant in higher porosity percentage and water absorption.
The result showed that, the proposed porous resin has great potential in replacing plaster mould as mould material for CSRM system.
The mould has a uniform open pore to enable the filtration process to take place within the mould and the slip and has a great mechanical strength.
However, porous resin is still a semi-permanent mould with definite service life.
Related Results
Development and Evaluation of a Dynamic Mould Temperature Control System with Electric Heating for Variotherm Injection Moulding
Development and Evaluation of a Dynamic Mould Temperature Control System with Electric Heating for Variotherm Injection Moulding
Variotherm injection moulding process is a new injection moulding technology. In this process, the mould cavity surface is heated up to a high temperature, before the filling stage...
Plastic injection moulding machines with auxiliary equipment: Safety during maintenance and production interventions
Plastic injection moulding machines with auxiliary equipment: Safety during maintenance and production interventions
Les risques liés à l’interaction entre les presses à injection de plastique et leurs équipements périphériques (ex. : robots, convoyeurs) sont peu connus des gens du milieu et ces ...
FORMATION OF HOLLOW SHAPE PORCELAIN BY USING A NEW INTEGRATED SLIP ROTARY MOULDING TECHNIQUE
FORMATION OF HOLLOW SHAPE PORCELAIN BY USING A NEW INTEGRATED SLIP ROTARY MOULDING TECHNIQUE
Hollow ceramic product is fabricated generally using slip casting technique. The conventional processes produce slip and mould waste which require for disposal schedule. A rotary m...
Product Performance Analysis of Fine Bone China Using Ceramic Slip Rotary Moulding Process
Product Performance Analysis of Fine Bone China Using Ceramic Slip Rotary Moulding Process
By combining the traditional slip casting technique and existing polymer rotary moulding concept a new process namely Ceramic Slip Rotary Moulding (CSRM) machine was established. T...
Adhesion of Resin-Resin and Resin–Lithium Disilicate Ceramic: A Methodological Assessment
Adhesion of Resin-Resin and Resin–Lithium Disilicate Ceramic: A Methodological Assessment
The aim of this study was to evaluate four test methods on the adhesion of resin composite to resin composite, and resin composite to glass ceramic. Resin composite specimens (N = ...
Fault state evolution governed by cumulative slip history.
Fault state evolution governed by cumulative slip history.
Given the significant risk that earthquakes pose to society, understanding the spatiotemporal evolution of slip rates on natural faults has been a central research objective over r...
PENGARUH PERIODE PEMANENAN RESIN DAMAR TERHADAP PENDAPATAN PETANI REPONG DAMAR DI PEKON LABUHAN MANDI PESISIR BARAT
PENGARUH PERIODE PEMANENAN RESIN DAMAR TERHADAP PENDAPATAN PETANI REPONG DAMAR DI PEKON LABUHAN MANDI PESISIR BARAT
Repong Damar is a plot of land planted with various types of productive plants from various types of timber with economic value. The term repong damar is because the plant that is ...
Kaedah Pengilmuan Swacuan
Kaedah Pengilmuan Swacuan
It is explained that knowledge grows in a mould created by scholars concerned and the meaning of a mould of knowledge is shown to have different features than the famous knowledge ...