Ultra-broadband multi-tone frequency measurement based on the recirculating frequency shift of a frequency modulated continuous wave

We proposed an ultra-broadband multi-tone frequency measurement (FM) approach based on frequency modulated continuous wave (FMCW). This work aims to achieve wide-range multi-tone FM without image interference, using electrical components with narrow bandwidth and low sampling rate, while maintaining high FM accuracy. The FM range is largely increased by extending the bandwidth of the optical FMCW through a recirculating frequency shift (RFS) loop, from 0.001 GHz-16 GHz to 0.001 GHz-437.5 GHz. The bandwidth-extended optical FMCW coherently beats with a continuous wave (CW) light modulated by the signal under test (SUT) at the balanced photodetector (BPD). The following low-pass filter (LPF) outputs pulses at the time when the frequencies of FMCW and SUT are equal, constructing frequency-to-time mapping (FTTM). Owing to the zero-intermediate-frequency (zero-IF) architecture, image interference is avoided. In addition, the up- and down-chirps of FMCW are used to achieve self-reference, avoiding the utilizing of reference signals, which realizes high FM accuracy. In the experiment, a FM within 0.1 GHz-43.5 GHz is demonstrated using an available microwave generator (MG) with a maximum output frequency of 43.5 GHz. The FM errors are kept within ±10 MHz for all frequencies with a mean and standard deviation of −0.3 MHz and 3.17 MHz, respectively. The multi-tone resolution is about 60 MHz at the FMCW chirp rate of 3.1998 GHz/μs, which is consistent with the theoretical result. According to the theoretical derivation, the multi-tone resolution can be improved to 1 MHz by lowering the FMCW chirp rate.