Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Retrieving aerosol in a cloudy environment: aerosol product availability as a function of spatial resolution

View through CrossRef
Abstract. The challenge of using satellite observations to retrieve aerosol properties in a cloudy environment is to prevent contamination of the aerosol signal from clouds, while maintaining sufficient aerosol product yield to satisfy specific applications. We investigate aerosol retrieval availability at different instrument pixel resolutions using the standard MODIS aerosol cloud mask applied to MODIS data and supplemented with a new GOES-R cloud mask applied to GOES data for a domain covering North America and surrounding oceans. Aerosol product availability is not the same as the cloud free fraction and takes into account the techniques used in the MODIS algorithm to avoid clouds, reduce noise and maintain sufficient numbers of aerosol retrievals. The inherent spatial resolution of each instrument, 0.5×0.5 km for MODIS and 1×1 km for GOES, is systematically degraded to 1×1, 2×2, 1×4, 4×4 and 8×8 km resolutions and then analyzed as to how that degradation would affect the availability of an aerosol retrieval, assuming an aerosol product resolution at 8×8 km. The analysis is repeated, separately, for near-nadir pixels and those at larger view angles to investigate the effect of pixel growth at oblique angles on aerosol retrieval availability. The results show that as nominal pixel size increases, availability decreases until at 8×8 km 70% to 85% of the retrievals available at 0.5 km, nadir, have been lost. The effect at oblique angles is to further decrease availability over land but increase availability over ocean, because sun glint is found at near-nadir view angles. Finer resolution sensors (i.e., 1×1, 2×2 or even 1×4 km) will retrieve aerosols in partly cloudy scenes significantly more often than sensors with nadir views of 4×4 km or coarser. Large differences in the results of the two cloud masks designed for MODIS aerosol and GOES cloud products strongly reinforce that cloud masks must be developed with specific purposes in mind and that a generic cloud mask applied to an independent aerosol retrieval will likely fail.
Title: Retrieving aerosol in a cloudy environment: aerosol product availability as a function of spatial resolution
Description:
Abstract.
The challenge of using satellite observations to retrieve aerosol properties in a cloudy environment is to prevent contamination of the aerosol signal from clouds, while maintaining sufficient aerosol product yield to satisfy specific applications.
We investigate aerosol retrieval availability at different instrument pixel resolutions using the standard MODIS aerosol cloud mask applied to MODIS data and supplemented with a new GOES-R cloud mask applied to GOES data for a domain covering North America and surrounding oceans.
Aerosol product availability is not the same as the cloud free fraction and takes into account the techniques used in the MODIS algorithm to avoid clouds, reduce noise and maintain sufficient numbers of aerosol retrievals.
The inherent spatial resolution of each instrument, 0.
5×0.
5 km for MODIS and 1×1 km for GOES, is systematically degraded to 1×1, 2×2, 1×4, 4×4 and 8×8 km resolutions and then analyzed as to how that degradation would affect the availability of an aerosol retrieval, assuming an aerosol product resolution at 8×8 km.
The analysis is repeated, separately, for near-nadir pixels and those at larger view angles to investigate the effect of pixel growth at oblique angles on aerosol retrieval availability.
The results show that as nominal pixel size increases, availability decreases until at 8×8 km 70% to 85% of the retrievals available at 0.
5 km, nadir, have been lost.
The effect at oblique angles is to further decrease availability over land but increase availability over ocean, because sun glint is found at near-nadir view angles.
Finer resolution sensors (i.
e.
, 1×1, 2×2 or even 1×4 km) will retrieve aerosols in partly cloudy scenes significantly more often than sensors with nadir views of 4×4 km or coarser.
Large differences in the results of the two cloud masks designed for MODIS aerosol and GOES cloud products strongly reinforce that cloud masks must be developed with specific purposes in mind and that a generic cloud mask applied to an independent aerosol retrieval will likely fail.

Related Results

Decadal Characterization of Satellite-based Aerosol Types Over Arabian Peninsula: Comprehensive Insight and General Performance
Decadal Characterization of Satellite-based Aerosol Types Over Arabian Peninsula: Comprehensive Insight and General Performance
Retrieving aerosol characteristics such as particle size, shape, and absorption properties is a big challenge in satellite-based remote sensing, mainly for the single-viewing-angle...
Experimental studies on cloud condensation nuclei activation and cloud microphysical properties
Experimental studies on cloud condensation nuclei activation and cloud microphysical properties
Atmospheric aerosol particles have the ability to affect climate through cloud interactions and direct scattering and absorption of radiation. These aerosol particles can also affe...
Aerosol optical and radiative properties over Asia: Ground-based AERONET observations
Aerosol optical and radiative properties over Asia: Ground-based AERONET observations
Aerosols continue to contribute the largest uncertainty in quantifying Earth’s climate change. The uncertainty associated with aerosol radiative forcing is found to be hi...
Aerosol Microphysical Particle Parameter Inversion and Error Analysis Based on Remote Sensing Data
Aerosol Microphysical Particle Parameter Inversion and Error Analysis Based on Remote Sensing Data
The use of Raman and high-spectral lidars enables measurements of a stratospheric aerosol extinction profile independent of backscatter, and a multi-wavelength (MW) lidar can obtai...
Effects of physical and chemical nonlinearities on evolution of optical properties of biomass burning aerosol
Effects of physical and chemical nonlinearities on evolution of optical properties of biomass burning aerosol
<p>Aerosol from open biomass burning (BB) is known to strongly impact the Earth radiation budget. Therefore, a good knowledge of its optical properties and their evol...
A holistic aerosol model for Uranus and Neptune, including Dark Spots
A holistic aerosol model for Uranus and Neptune, including Dark Spots
<p>Previous studies of the reflectance spectra of Uranus and Neptune concentrated on individual, narrow wavelength regions, inferring solutions for the vertical struc...
Simultaneous retrieval of aerosol and cloud properties during the MILAGRO field campaign
Simultaneous retrieval of aerosol and cloud properties during the MILAGRO field campaign
Abstract. Estimation of Direct Climate Forcing (DCF) due to aerosols in cloudy areas has historically been a difficult task, mainly because of a lack of appropriate measurements. T...
The end of the anthropogenic aerosol era?
The end of the anthropogenic aerosol era?
<p>The Earth’s climate is rapidly changing. Over the past century, aerosols, via their ability to absorb or scatter solar radiation and alter clouds, pl...

Back to Top