Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Resistance Welding of Aluminum Alloys
View through CrossRef
AbstractThe resistance welding processes commonly employed for joining aluminum are resistance spot welding, resistance seam welding, resistance roll welding, upset and flash welding for butt joining welding, and high-frequency resistance welding. This article discusses the general factors affecting resistance welding: electrical and thermal conductivities, rising temperature, plastic range, shrinkage, and surface oxide. It reviews the weldability of base materials such as Alclad alloys and aluminum metal-matrix composites. The article describes the joint design and welding procedures for resistance spot welding, as well as the joint type, equipment, and welding procedures for seam and roll spot welding. It concludes with information on flash welding, high-frequency welding, and cross-wire welding.
Title: Resistance Welding of Aluminum Alloys
Description:
AbstractThe resistance welding processes commonly employed for joining aluminum are resistance spot welding, resistance seam welding, resistance roll welding, upset and flash welding for butt joining welding, and high-frequency resistance welding.
This article discusses the general factors affecting resistance welding: electrical and thermal conductivities, rising temperature, plastic range, shrinkage, and surface oxide.
It reviews the weldability of base materials such as Alclad alloys and aluminum metal-matrix composites.
The article describes the joint design and welding procedures for resistance spot welding, as well as the joint type, equipment, and welding procedures for seam and roll spot welding.
It concludes with information on flash welding, high-frequency welding, and cross-wire welding.
Related Results
Welding Parameters for Aluminum Alloys
Welding Parameters for Aluminum Alloys
With increasing application of aluminum and aluminum alloys, as the most commonly used nonferrous metallic alloys in industrial scales, joining and in particular welding of these a...
A.D.S. Wet Welding
A.D.S. Wet Welding
Abstract
The purpose of this paper is to discuss wet welding using fully anthropomorphic atmospheric diving suits and offer proof that wet welding operations are ...
Welding robot system applied in sub-sea pipeline-installation
Welding robot system applied in sub-sea pipeline-installation
Purpose
– The aim of this study was to develop a new generation of automatic systems based on cutting-edge design and practical welding physics to minimize downtime...
Effect of GTAW on the Mechanical Properties of Mild Steel
Effect of GTAW on the Mechanical Properties of Mild Steel
Tungsten metal arc welding (GTAW) is a highly popular welding technique in manufacturing. The welding factors such as welding current, voltage, speed, and gas flow ra...
Research on prediction of welding deformation based on improved GA-BP neural network
Research on prediction of welding deformation based on improved GA-BP neural network
Abstract
Welding deformation prediction can predict the deformation that may occur during the welding process, so that corresponding measures can be taken to control the de...
Study on the Influence of Different Welding Processes on the Mechanical Properties of X80 Girth Welding Joints
Study on the Influence of Different Welding Processes on the Mechanical Properties of X80 Girth Welding Joints
Abstract
The emergence of welding defects and uneven distribution of mechanical properties will easily make the welded joint a weak part of the pipe structure. It is...
Mechanical Properties and Microstructure Analysis of Mild Steel Welding Made by GTAW
Mechanical Properties and Microstructure Analysis of Mild Steel Welding Made by GTAW
This work discusses the effect of gas tungsten arc welding (GTAW) variables on the welding transverse tensile strength and hardness of S 235JR at different groove configurations. T...
Safe Welding Initiatives
Safe Welding Initiatives
Abstract
Maintaining safety while operation and maintenance process is a challenge. Nowadays, challenges can be tackled by new approach such as adopting 4IR technolo...