Javascript must be enabled to continue!
Effect of rocker-soled shoes on the position of metatarsophalangeal joints: Imaging study with weight-bearing computed tomography
View through CrossRef
Introduction: Rocker-soled shoes (“rocker-bottom/profile”) redistribute forefoot loads and reduce local overload, and are used for diabetic foot, rigid hallux, and metatarsalgia. The proposed mechanism is the rocker fulcrum, which facilitates progression in detachment by reducing metatarsophalangeal (MTP) dorsiflexion and pressure under the metatarsal heads. Despite evidence of lower plantar pressure, anatomical data on the sagittal MTP range of motion under weight-bearing are lacking. Weight-bearing computed tomography (WBCT) allows three-dimensional MTP evaluation without overlap. The objective is to compare MTP angles of the second and third rays in detachment in barefoot individuals, with conventional shoes, and rocker shoes. Methods: Prospective comparative study with 20 volunteers (18–65 years), without complaints/deformities, hindfoot 0°–10°. Rigid deformities, previous surgeries/fractures, rheumatic diseases, secondary causes of metatarsalgia, neuromuscular syndromes, varus/ valgus, and tomographic signs of coalition/osteoarthritis were excluded. Minimum sample n = 17 (power 90%); 20 were included. Cone beam WBCT was performed. Each foot was evaluated in three conditions: barefoot (GD), conventional shoes (GCC), and rocker shoes (GMB; apex at 60% of the outsole; radius 15.5 cm; rigid outsole). Detachment was simulated with 15° plantar flexion with load, maintaining the position with supports. Metatarsal joint coverage angle (JCA) and MTP extension angle (EAM) were measured in the second and third rays in plantigrade and detachment; the difference (detachment-plantigrade) was analyzed. Statistics: ANOVA of repeated measures and Friedman, with paired comparisons and Bonferroni. Results: Twenty subjects (10M/10W), 40 ft. The variation in JCA and EAM between plantigrade and detachment was lower in the rocker shoes (GMB) vs GD and GCC, with no difference between GD and GCC. Conclusion: Rocker-soled shoes require less mobility of the second and third MTP joints between plantigrade support and detachment in individuals without pathology.
Associacao Brasileira de Medicina e Cirurgia do Tornozelo e Pe (ABTPe)
Title: Effect of rocker-soled shoes on the position of metatarsophalangeal joints: Imaging study with weight-bearing computed tomography
Description:
Introduction: Rocker-soled shoes (“rocker-bottom/profile”) redistribute forefoot loads and reduce local overload, and are used for diabetic foot, rigid hallux, and metatarsalgia.
The proposed mechanism is the rocker fulcrum, which facilitates progression in detachment by reducing metatarsophalangeal (MTP) dorsiflexion and pressure under the metatarsal heads.
Despite evidence of lower plantar pressure, anatomical data on the sagittal MTP range of motion under weight-bearing are lacking.
Weight-bearing computed tomography (WBCT) allows three-dimensional MTP evaluation without overlap.
The objective is to compare MTP angles of the second and third rays in detachment in barefoot individuals, with conventional shoes, and rocker shoes.
Methods: Prospective comparative study with 20 volunteers (18–65 years), without complaints/deformities, hindfoot 0°–10°.
Rigid deformities, previous surgeries/fractures, rheumatic diseases, secondary causes of metatarsalgia, neuromuscular syndromes, varus/ valgus, and tomographic signs of coalition/osteoarthritis were excluded.
Minimum sample n = 17 (power 90%); 20 were included.
Cone beam WBCT was performed.
Each foot was evaluated in three conditions: barefoot (GD), conventional shoes (GCC), and rocker shoes (GMB; apex at 60% of the outsole; radius 15.
5 cm; rigid outsole).
Detachment was simulated with 15° plantar flexion with load, maintaining the position with supports.
Metatarsal joint coverage angle (JCA) and MTP extension angle (EAM) were measured in the second and third rays in plantigrade and detachment; the difference (detachment-plantigrade) was analyzed.
Statistics: ANOVA of repeated measures and Friedman, with paired comparisons and Bonferroni.
Results: Twenty subjects (10M/10W), 40 ft.
The variation in JCA and EAM between plantigrade and detachment was lower in the rocker shoes (GMB) vs GD and GCC, with no difference between GD and GCC.
Conclusion: Rocker-soled shoes require less mobility of the second and third MTP joints between plantigrade support and detachment in individuals without pathology.
Related Results
PERBANDINGAN PEMAKAIAN ROCKER ARM KONVENSIONAL DENGAN ROCKER ARM ROLLER BEARING PADA SEPEDA MOTOR
PERBANDINGAN PEMAKAIAN ROCKER ARM KONVENSIONAL DENGAN ROCKER ARM ROLLER BEARING PADA SEPEDA MOTOR
Roller Rocker Arm is important for transmitting signals and determining work efficiency which is the result of technological developments from ordinary rocker arms. The pur...
Three-dimensional kinematic analysis of running in rocker-soled shoes
Three-dimensional kinematic analysis of running in rocker-soled shoes
Introduction: Rocker-soled shoes have mechanical advantages by redistributing load to the forefoot and reducing local overload, and are widely used for foot and ankle pathologies a...
Metatarsophalangeal Arthrodesis through the Modified Steel Basket Technique in Foal
Metatarsophalangeal Arthrodesis through the Modified Steel Basket Technique in Foal
Background: The metacarpophalangeal and metatarsophalangeal joints are very demanded during high intensity exercises, and may be affected by osteoarthritis, fractures, luxations an...
TikTok sebagai Media Promosi Produk Mks.shoes
TikTok sebagai Media Promosi Produk Mks.shoes
Abstract. The current development of fashion has made several business people, especially in the fashion sector, increasingly. Along with technological developments, especially in ...
SCF Equations for T/Y and K Square-to-Round Tubular Joint
SCF Equations for T/Y and K Square-to-Round Tubular Joint
Summary
A parametric stress analysis of T/Y and K square-to-round tubular joints subjected to axial loads and in-plane and out-of-plane bending moments has been p...
A Comparative Study of the Design Basis for Complex Tubular Joints
A Comparative Study of the Design Basis for Complex Tubular Joints
ABSTRACT
This paper describes a comparative study of the design basis for ring-stiffened, cast steel and internal grouted tubular joints. The current levels of kn...
[RETRACTED] Prima Weight Loss Dragons Den UK v1
[RETRACTED] Prima Weight Loss Dragons Den UK v1
[RETRACTED]Prima Weight Loss Dragons Den UK :-Obesity is a not kidding medical issue brought about by devouring an excessive amount of fat, eating terrible food sources, and practi...
[RETRACTED] Prima Weight Loss Dragons Den UK v1
[RETRACTED] Prima Weight Loss Dragons Den UK v1
[RETRACTED]Prima Weight Loss Dragons Den UK :-Obesity is a not kidding medical issue brought about by devouring an excessive amount of fat, eating terrible food sources, and practi...

