Javascript must be enabled to continue!
Taking up the challenge of identifying active faults for seismic hazard assessment of the city of Ulaanbaatar (Mongolia)
View through CrossRef
<p>Ulaanbaatar, capital city of Mongolia (1.5 M inhabitants, i.e. half of the country&#8217;s population), is located in Central Mongolia where seismic activity and deformation rates are low (< 1mm/yr.). In contrast, Western Mongolia has experienced four great earthquakes (M &#8805; 8) between 1905 and 1957 as well as numerous moderate ones. Some (e.g. the 1957 Bogd earthquake) have been felt at the capital located more than 500 km away. During the last decades, several active faults, located 10 km to 45 km away from Ulaanbaatar, have been discovered and studied. Tectonic Geomorphology and Paleoseismology studies indicate that these faults are able to generate earthquakes of M &#8805; 6 with average recurrence times ranging from 1 kyr to 10 kyr (e.g. 1195 &#177; 157 yr for the Sharkhai fault). Furthermore, since 2005 very dense microseismicity swarms located 10 km NW of the City have been monitored by the Seismic Observatory of Mongolia (IAG). Further studies showed the swarms are produced by the previously undetected Emeelt fault zone along three parallel branches. Due to their proximity to a key population and economic center, all these active structures contribute significantly to increasing Seismic Hazard. During the course of these studies, we documented Quaternary activity along several supplementary faults, which demonstrates that the knowledge of active faults in the region is still incomplete and suggests seismic hazard levels should be revised. Therefore, we undertook to map, as exhaustively as possible, all active tectonic structures in a radius of 300 km around Ulaanbaatar. Here we present preliminary results based on the combined analysis of multi-source and multi-sensor data from satellite images (e.g. Pleiades, Sentinel-2, Landsat8), UAV photographs, and digital elevation models (TanDEM-X and UAV photogrammetric DEMs) in order to extract the most relevant information at various scales. We performed a detailed Tectonic Geomorphology analysis of alluvial and slope landforms to identify recent deformation affecting stream channels and associated deposits (ponds, fans and terraces). On that basis, we document segmentation, deformation patterns and kinematics, as well as relationships between faults at regional scale. Finally, we identify potential sites for future paleoseismic investigations along the main structures. Though this project is in a preliminary stage, our long-term goal is to build a comprehensive database of sources of seismic hazard to the City of Ulaanbaatar and integrate these results into seismic hazard calculations.</p>
Title: Taking up the challenge of identifying active faults for seismic hazard assessment of the city of Ulaanbaatar (Mongolia)
Description:
<p>Ulaanbaatar, capital city of Mongolia (1.
5 M inhabitants, i.
e.
half of the country&#8217;s population), is located in Central Mongolia where seismic activity and deformation rates are low (< 1mm/yr.
).
In contrast, Western Mongolia has experienced four great earthquakes (M &#8805; 8) between 1905 and 1957 as well as numerous moderate ones.
Some (e.
g.
the 1957 Bogd earthquake) have been felt at the capital located more than 500 km away.
During the last decades, several active faults, located 10 km to 45 km away from Ulaanbaatar, have been discovered and studied.
Tectonic Geomorphology and Paleoseismology studies indicate that these faults are able to generate earthquakes of M &#8805; 6 with average recurrence times ranging from 1 kyr to 10 kyr (e.
g.
1195 &#177; 157 yr for the Sharkhai fault).
Furthermore, since 2005 very dense microseismicity swarms located 10 km NW of the City have been monitored by the Seismic Observatory of Mongolia (IAG).
Further studies showed the swarms are produced by the previously undetected Emeelt fault zone along three parallel branches.
Due to their proximity to a key population and economic center, all these active structures contribute significantly to increasing Seismic Hazard.
During the course of these studies, we documented Quaternary activity along several supplementary faults, which demonstrates that the knowledge of active faults in the region is still incomplete and suggests seismic hazard levels should be revised.
Therefore, we undertook to map, as exhaustively as possible, all active tectonic structures in a radius of 300 km around Ulaanbaatar.
Here we present preliminary results based on the combined analysis of multi-source and multi-sensor data from satellite images (e.
g.
Pleiades, Sentinel-2, Landsat8), UAV photographs, and digital elevation models (TanDEM-X and UAV photogrammetric DEMs) in order to extract the most relevant information at various scales.
We performed a detailed Tectonic Geomorphology analysis of alluvial and slope landforms to identify recent deformation affecting stream channels and associated deposits (ponds, fans and terraces).
On that basis, we document segmentation, deformation patterns and kinematics, as well as relationships between faults at regional scale.
Finally, we identify potential sites for future paleoseismic investigations along the main structures.
Though this project is in a preliminary stage, our long-term goal is to build a comprehensive database of sources of seismic hazard to the City of Ulaanbaatar and integrate these results into seismic hazard calculations.
</p>.
Related Results
Subtle Faults Characterization Based on Fault Simulation and AI OBN Seismic Attributes Optimization
Subtle Faults Characterization Based on Fault Simulation and AI OBN Seismic Attributes Optimization
Abstract
Subtle faults are often below seismic resolution, especially in strike slip regimes, it is very difficult to identify them as they have small throw and the ...
Inner Mongolia, Outer Mongolia
Inner Mongolia, Outer Mongolia
The Mongolian Empire, which reigned over the Eurasia Continent, was a great empire in the Middle Ages. Now, however, it is a divided nation, with a current population of about 10 m...
Integrated Subtle Fault Prediction Technique Based on Seismic Conditioning and Deep Learning
Integrated Subtle Fault Prediction Technique Based on Seismic Conditioning and Deep Learning
Abstract
With the development of oilfield, the role of subtle faults becomes more and more important. Due to the limitation resolution of seismic data, it is hard fo...
AI-Assisted Subtle Faults Characterization Based on the Integrated Seismic Diffraction Imaging and its Application in M Oilfield, Middle East
AI-Assisted Subtle Faults Characterization Based on the Integrated Seismic Diffraction Imaging and its Application in M Oilfield, Middle East
Abstract
Subtle faults play a key role in reservoir characterization. Due to subtle faults in carbonate reservoirs are often below seismic resolution, it is very dif...
Application of the City Blueprint Approach in Landlocked Asian Countries: A Case Study of Ulaanbaatar, Mongolia
Application of the City Blueprint Approach in Landlocked Asian Countries: A Case Study of Ulaanbaatar, Mongolia
Urbanization is a major global development. At present, more than half of the world population lives in urban areas, i.e., cities. One of the fundamental requirements of citizens i...
4D Seismic on Gullfaks
4D Seismic on Gullfaks
SUMMARY
New technologies are rapidly emerging helping to obtain optimal drainage of large reservoirs. 4D seismic is such a reservoir monitoring technique. The phy...
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Abstract
Mapping and discrimination of Upper Jurassic Arab reservoirs (Arab A/B/C and D) in this 3D seismic onshore field of Abu Dhabi, is very sensitive to the seis...
The Impact of Pre-Existing Faults on Fault Geometry during Multiphase Rifts: The Jiyang Depression, Eastern China
The Impact of Pre-Existing Faults on Fault Geometry during Multiphase Rifts: The Jiyang Depression, Eastern China
The combination of multi-phase extension and pre-existing fault reactivation results in a complex fault pattern within hydrocarbon-bearing basins, affecting hydrocarbon exploration...

