Voltage compensation using fuel cell fed dynamic voltage restorer

One of the basic tasks of the dynamic voltage restorer (DVR) is to maintain voltage stability in distribution systems by correcting any deviations or disturbances in the three-phase supply. Whether they are increases or decreases. However, one of its disadvantages is its power source, as it cannot supply itself with power from the electrical grid like parallel compensators, which obtain power directly from the grid. This article presents an energy study of a dynamic voltage regulator (DVR) when operated using a power source represented by fuel cells, which are considered a clean and renewable source. On the other hand, excess energy from the regenerator or fuel cells can be output and injected into the distribution network for utilization via a parallel compensator (CP). The parallel compensator also compensates for reactive energy on the reactive load side to increase the power factor measured at the source side of the distribution system. This integrated system also uses neural networks to identify voltage disturbances and determine the voltages (modules/arguments) that must be added to the voltages in the power grid for correction. This analytical study was completed using a simulation system to confirm the effectiveness of this integrated system. The distinctive feature of this study is the integration of fuel cells and neural network-based control in the DVR system, providing a sustainable and intelligent alternative to conventional configurations, which makes it different from traditional DVRs that operate with batteries and supercapacitors. Its efficiency in compensating for voltage drops and surges is evident, and it also improves the power factor and ensures reliable operation of voltage-sensitive devices.