Javascript must be enabled to continue!
High-power narrow-linewidth single-frequency pulsed fiber amplifier based on self-phase modulation suppression via sawtooth-shaped pulses
View through CrossRef
Fiber laser system in master oscillator power amplifier (MOPA) scheme is a promising technique for high-power narrow-linewidth laser output. With modulation-generated pulsed seed laser, the fiber MOPA benefits the flexible temporal behavior. However, the spectral linewidth broadening induced by self-phase modulation (SPM) is the main obstacle to achieving high-power single-frequency laser output with narrow spectral linewidth, especially for pulsed fiber MOPA in which the kilowatts level peak power results in strong nonlinearity. The SPM induced linewidth broadening is related to the derivative of light intensity with respect to time (d<i>I</i>/d<i>t</i>). Theoretically, if the d<i>I</i>/d<i>t</i> of the laser pulse is a constant, the SPM process will not generate any new frequency components. Hence, the linewidth broadening can be suppressed. In this work, we demonstrate a high-power single-frequency Yb fiber amplifier at 1064 nm, in which a sawtooth laser pulse is employed to suppress the SPM induced linewidth broadening, for obtaining the output with near-transform-limited narrow linewidth. The sawtooth-shaped seed pulse train is generated through using an electro-optic intensity modulator to modulate the continuous-wave (CW) output of a single-frequency fiber laser. After being pre-amplified, the seed laser with a pulse repetition rate of 20 kHz is coupled into the main amplifier, in which a piece of 0.9-m-long Yb-doped silica fiber with core and clad diameters of 35 μm and 250 μm, respectively, is used as a gain medium. The seed laser is enhanced to an average power value of 3.13 W under a launched 976-nm pump power value of 11.3 W before the onset of stimulate Brillouin scattering. The pulse energy 157 μJ and the pulse width 6.5 ns give a peak power of 24 kW. The spectral linewidth measured using a scanning Fabry-Perot interferometer at the maximum power is only 83 MHz, which is quite close to the 76-MHz transform-limited linewidth of the 6.5-ns sawtooth-shaped pulse. For comparison, we also conduct an experiment with a common Gaussian-shaped seed laser, in which the spectral linewidth is broadened significantly with a peak power value of only 1.5 kW. The results here reveal that the using of the sawtooth-shaped pulse is a promising technique to suppress the SPM induced spectral linewidth broadening in high-peak-power fiber amplifiers and acquire near-transform-limited narrow-linewidth laser output.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: High-power narrow-linewidth single-frequency pulsed fiber amplifier based on self-phase modulation suppression via sawtooth-shaped pulses
Description:
Fiber laser system in master oscillator power amplifier (MOPA) scheme is a promising technique for high-power narrow-linewidth laser output.
With modulation-generated pulsed seed laser, the fiber MOPA benefits the flexible temporal behavior.
However, the spectral linewidth broadening induced by self-phase modulation (SPM) is the main obstacle to achieving high-power single-frequency laser output with narrow spectral linewidth, especially for pulsed fiber MOPA in which the kilowatts level peak power results in strong nonlinearity.
The SPM induced linewidth broadening is related to the derivative of light intensity with respect to time (d<i>I</i>/d<i>t</i>).
Theoretically, if the d<i>I</i>/d<i>t</i> of the laser pulse is a constant, the SPM process will not generate any new frequency components.
Hence, the linewidth broadening can be suppressed.
In this work, we demonstrate a high-power single-frequency Yb fiber amplifier at 1064 nm, in which a sawtooth laser pulse is employed to suppress the SPM induced linewidth broadening, for obtaining the output with near-transform-limited narrow linewidth.
The sawtooth-shaped seed pulse train is generated through using an electro-optic intensity modulator to modulate the continuous-wave (CW) output of a single-frequency fiber laser.
After being pre-amplified, the seed laser with a pulse repetition rate of 20 kHz is coupled into the main amplifier, in which a piece of 0.
9-m-long Yb-doped silica fiber with core and clad diameters of 35 μm and 250 μm, respectively, is used as a gain medium.
The seed laser is enhanced to an average power value of 3.
13 W under a launched 976-nm pump power value of 11.
3 W before the onset of stimulate Brillouin scattering.
The pulse energy 157 μJ and the pulse width 6.
5 ns give a peak power of 24 kW.
The spectral linewidth measured using a scanning Fabry-Perot interferometer at the maximum power is only 83 MHz, which is quite close to the 76-MHz transform-limited linewidth of the 6.
5-ns sawtooth-shaped pulse.
For comparison, we also conduct an experiment with a common Gaussian-shaped seed laser, in which the spectral linewidth is broadened significantly with a peak power value of only 1.
5 kW.
The results here reveal that the using of the sawtooth-shaped pulse is a promising technique to suppress the SPM induced spectral linewidth broadening in high-peak-power fiber amplifiers and acquire near-transform-limited narrow-linewidth laser output.
Related Results
Frequency of Common Chromosomal Abnormalities in Patients with Idiopathic Acquired Aplastic Anemia
Frequency of Common Chromosomal Abnormalities in Patients with Idiopathic Acquired Aplastic Anemia
Objective: To determine the frequency of common chromosomal aberrations in local population idiopathic determine the frequency of common chromosomal aberrations in local population...
Optimization of C-Band Erbium Doped Distributed Feedback Fiber Laser
Optimization of C-Band Erbium Doped Distributed Feedback Fiber Laser
<p>Distributed Feedback fiber lasers (DFB FL) are robust narrow linewidth laser sources with its signal generated in optical fiber and can be delivered across a substantial d...
Optimization of C-Band Erbium Doped Distributed Feedback Fiber Laser
Optimization of C-Band Erbium Doped Distributed Feedback Fiber Laser
<p>Distributed Feedback fiber lasers (DFB FL) are robust narrow linewidth laser sources with its signal generated in optical fiber and can be delivered across a substantial d...
Safety and Efficacy of Atezolizumab in Ovarian Cancer
Safety and Efficacy of Atezolizumab in Ovarian Cancer
Abstract
Introduction
Although the efficacy of PD-L1 blockade has been evaluated in analyses that combine pharmacologically distinct antibodies, the specific efficacy and safety of...
Sawtooth activities in EAST neutral beam injection plasma
Sawtooth activities in EAST neutral beam injection plasma
Neutral beam injection (NBI) system has been proved to affect sawtooth activities through both producing energetic particles and supplying torque applied to the plasma. The impact ...
Is a Fitbit a Diary? Self-Tracking and Autobiography
Is a Fitbit a Diary? Self-Tracking and Autobiography
Data becomes something of a mirror in which people see themselves reflected. (Sorapure 270)In a 2014 essay for The New Yorker, the humourist David Sedaris recounts an obsession spu...
Comparison of 1480 nm and 980 nm-pumped Gallium-Erbium fiber amplifier
Comparison of 1480 nm and 980 nm-pumped Gallium-Erbium fiber amplifier
Background:
One way to reduce the length of the gain medium in Erbium-Doped Fiber Amplifier (EDFA) is by doping the fiber core with a high concentration of Erbi...
Comparison of 1480 nm and 980 nm-pumped Gallium-Erbium fiber amplifier
Comparison of 1480 nm and 980 nm-pumped Gallium-Erbium fiber amplifier
Background:
One way to reduce the length of the gain medium in Erbium-Doped Fiber Amplifier (EDFA) is by doping the fiber core with a high concentration of Erbi...

