Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Research of Exhaust Gas Boiler Heat Exchange Surfaces with Reduced Corrosion When Water-Fuel Emulsion Combustion

View through CrossRef
The application of water-fuel emulsion (WFE) in internal combustion engines enables to reduce the consumption of sulfurous fuel oils, thereby protecting the environment from emissions of sulfur and nitrogen oxides, as well revealing a great potential for the heat utilization of exhaust gases. The efficiency of utilization of exhaust gas heat in exhaust boilers (EGB) depends on their temperature at the outlet of EGB, id est. the depth of heat utilization. Exhaust gas temperature is limited by the rate of low-temperature corrosion (LTC), which reaches a level of 1.2 mm/year at the wall temperature of about 110 °C for the condensing heat exchange surfaces (HES) and reduces the reliability of the HES operation. Therefore, decreasing the corrosion rate of condensing HES at wall temperature below 110 °C to an acceptable level (about 0.2 mm/year) when undergoing WFE combustion will make it possible to reduce the exhaust gas temperature and, consequently, increase the efficiency of EGB and fuel saving during the operation of the ship power plant. The aim of the research is to assess improvements to the reliability, durability and efficient operation of condensing HES in marine EGB undergoing WFE combustion in a diesel engine based on experimental studies of the LTC process. A special experimental setup was developed for investigation. The use of WFE with a decreased wall temperature of HES below 80 to 70 °C would improve the reliability of the EGB along the accepted service life, increase the lifetime of the HES metal by almost six times as well as the overhaul period, and reduce the cost of repairing condensing HES. Furthermore, due to the reducing corrosion rate under WFE combustion, the application of low-temperature condensing HES makes it possible to enhance the efficiency of deeper exhaust gas heat utilization and provide sustainable efficient operation of a diesel engine plant on the whole at a safe thermal and environmentally friendly level.
Title: Research of Exhaust Gas Boiler Heat Exchange Surfaces with Reduced Corrosion When Water-Fuel Emulsion Combustion
Description:
The application of water-fuel emulsion (WFE) in internal combustion engines enables to reduce the consumption of sulfurous fuel oils, thereby protecting the environment from emissions of sulfur and nitrogen oxides, as well revealing a great potential for the heat utilization of exhaust gases.
The efficiency of utilization of exhaust gas heat in exhaust boilers (EGB) depends on their temperature at the outlet of EGB, id est.
the depth of heat utilization.
Exhaust gas temperature is limited by the rate of low-temperature corrosion (LTC), which reaches a level of 1.
2 mm/year at the wall temperature of about 110 °C for the condensing heat exchange surfaces (HES) and reduces the reliability of the HES operation.
Therefore, decreasing the corrosion rate of condensing HES at wall temperature below 110 °C to an acceptable level (about 0.
2 mm/year) when undergoing WFE combustion will make it possible to reduce the exhaust gas temperature and, consequently, increase the efficiency of EGB and fuel saving during the operation of the ship power plant.
The aim of the research is to assess improvements to the reliability, durability and efficient operation of condensing HES in marine EGB undergoing WFE combustion in a diesel engine based on experimental studies of the LTC process.
A special experimental setup was developed for investigation.
The use of WFE with a decreased wall temperature of HES below 80 to 70 °C would improve the reliability of the EGB along the accepted service life, increase the lifetime of the HES metal by almost six times as well as the overhaul period, and reduce the cost of repairing condensing HES.
Furthermore, due to the reducing corrosion rate under WFE combustion, the application of low-temperature condensing HES makes it possible to enhance the efficiency of deeper exhaust gas heat utilization and provide sustainable efficient operation of a diesel engine plant on the whole at a safe thermal and environmentally friendly level.

Related Results

Cooling Cyclic Air of Marine Engine with Water-Fuel Emulsion Combustion by Exhaust Heat Recovery Chiller
Cooling Cyclic Air of Marine Engine with Water-Fuel Emulsion Combustion by Exhaust Heat Recovery Chiller
The fuel efficiency of marine diesel engine as any combustion engine falls with raising the temperature of air at the suction of its turbocharger. Therefore, cooling the engine tur...
Experimental Study on Characteristics of Conical Spray and Combustion for Medium Speed D.I. Diesel Engine
Experimental Study on Characteristics of Conical Spray and Combustion for Medium Speed D.I. Diesel Engine
<div class="htmlview paragraph">This paper inverstigates a new way of conical spray for medium speed D. I. diesel engine, with which three different construction injectors we...
Combustion
Combustion
AbstractThe article contains sections titled:1.Introduction2.History of combustion3.Combustion fundamentals3.1.Combustion chemistry of gases3.2.Combustion chemistry of liquids3.3.C...
On-Board Ultrasonic Water-in-Diesel Emulsion (WiDE) Fuel System for Low-Emission Diesel Engine Combustion
On-Board Ultrasonic Water-in-Diesel Emulsion (WiDE) Fuel System for Low-Emission Diesel Engine Combustion
Water-in-diesel emulsion (WiDE) fuel is a promising alternative fuel capable of reducing nitrogen oxides (NOX) and particulate matter (PM) in diesel engine exhaust while simultaneo...
Effects of Fuel Properties on Diesel Engine Exhaust Emission Characteristics
Effects of Fuel Properties on Diesel Engine Exhaust Emission Characteristics
<div class="htmlview paragraph">The effects of fuel properties on diesel engine exhaust emission characteristics are investigated using eleven kinds of fuel with varying leve...
Integrated Management of Waste Heat in SAGD Operation in Liaohe Oilfield
Integrated Management of Waste Heat in SAGD Operation in Liaohe Oilfield
Abstract SAGD technology has been applied by scale in Liaohe Oilfield China, where high pressure steam is injected in a horizontal well to drain tight oil into the l...
Advanced combustion strategies for improving ic engine efficiency and emissions
Advanced combustion strategies for improving ic engine efficiency and emissions
The growing need for higher fuel efficiency and compliance with increasingly stringent emission regulations has prompted significant advancements in internal combustion (IC) engine...

Back to Top