Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

FORMATION OF Ru NANO-COMPOSITES

View through CrossRef
Researches of polymer immobilized nanoparticles of ruthenium have been carried out by frontal polymerization (FP) of ruthenium acrylonitrile (AN) complex in the presence of inorganic carrier. Assessment of their catalytic properties in the hydrogenation reaction of unsaturated compounds has been done. Effective and selective organo-inorganic catalyst has been synthesized on the basis of akrylonitril complex and its reactivity in the hydrogenation reaction of cyclohexen has been investigated. Synthesis of akrylonitril complex of ruthenium on the surface of mineral carrier SiO2 silica, its further polymerization and reduction leads to the formation of polymer-inorganic composite including nano-size particle of Ru stabilized by polymer matrix and inorganic carrier. The offered method is a new approach in the catalyst preparing. Synthesized samples of Ru- nano composetes have been studied by methods of element analysis, IR-spectroscopy and X-ray analysis. There are wide diffraction peaks at 300-800 °C range in the X-rays patterns of the obtained samples wich correspond to crystallic ruthenium. Broadening diffraction maximums testifies ultradisperse state of particles. Microporous structure with pore sizes to 20 nm and their uniform size distribution are typical for obtained nano composites. It has been determined that specific surface of carriers decreases after polymerization of RuAN on the surface, though it is bigger than S spec. of the polymerization product in SiO2 absence. Obtained hybride nano composites have developed surface and porous structure which provide accessibility of active centers of catalyst for reagents and their high activity in the researched catalytic reaction. Formation conditions of Ru nanoparticles influence on catalytic properties of the studied composites, for example, the use of various regimes of frontal polymerization in inert medium. With the increase of the reduction treatment temperature of nano-composites the hydrogenation rate of cyclohexene reduces, the reason of which is the integration of Ru particles in the obtaining of nano composites at high temperatures. It should be mentioned that after hydrogenation the main ruthenium mass in poly-RuAN (90%) will have zero valency. The polymer matrix reduces. It is also subjected to changes and it confirms by spectrum broadening. Thus, the synthesized hybridization of polymer-immobilized Ru-nanoparticles display high activity in the reaction of cyclohexene hydrogenation and keep their activity during repeated cycles of reactions. Catalytic properties of nano-composites depend on the conditions of their obtaining which influence apparently on the size of forming Ruthenium nanoparticles.Forcitation:Agaguseynova M.M., Mikailova M.R. Formation of Ru nano-composites. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N 3. P. 45-50
Title: FORMATION OF Ru NANO-COMPOSITES
Description:
Researches of polymer immobilized nanoparticles of ruthenium have been carried out by frontal polymerization (FP) of ruthenium acrylonitrile (AN) complex in the presence of inorganic carrier.
Assessment of their catalytic properties in the hydrogenation reaction of unsaturated compounds has been done.
Effective and selective organo-inorganic catalyst has been synthesized on the basis of akrylonitril complex and its reactivity in the hydrogenation reaction of cyclohexen has been investigated.
Synthesis of akrylonitril complex of ruthenium on the surface of mineral carrier SiO2 silica, its further polymerization and reduction leads to the formation of polymer-inorganic composite including nano-size particle of Ru stabilized by polymer matrix and inorganic carrier.
The offered method is a new approach in the catalyst preparing.
Synthesized samples of Ru- nano composetes have been studied by methods of element analysis, IR-spectroscopy and X-ray analysis.
There are wide diffraction peaks at 300-800 °C range in the X-rays patterns of the obtained samples wich correspond to crystallic ruthenium.
Broadening diffraction maximums testifies ultradisperse state of particles.
Microporous structure with pore sizes to 20 nm and their uniform size distribution are typical for obtained nano composites.
It has been determined that specific surface of carriers decreases after polymerization of RuAN on the surface, though it is bigger than S spec.
of the polymerization product in SiO2 absence.
Obtained hybride nano composites have developed surface and porous structure which provide accessibility of active centers of catalyst for reagents and their high activity in the researched catalytic reaction.
Formation conditions of Ru nanoparticles influence on catalytic properties of the studied composites, for example, the use of various regimes of frontal polymerization in inert medium.
With the increase of the reduction treatment temperature of nano-composites the hydrogenation rate of cyclohexene reduces, the reason of which is the integration of Ru particles in the obtaining of nano composites at high temperatures.
It should be mentioned that after hydrogenation the main ruthenium mass in poly-RuAN (90%) will have zero valency.
The polymer matrix reduces.
It is also subjected to changes and it confirms by spectrum broadening.
Thus, the synthesized hybridization of polymer-immobilized Ru-nanoparticles display high activity in the reaction of cyclohexene hydrogenation and keep their activity during repeated cycles of reactions.
Catalytic properties of nano-composites depend on the conditions of their obtaining which influence apparently on the size of forming Ruthenium nanoparticles.
Forcitation:Agaguseynova M.
M.
, Mikailova M.
R.
Formation of Ru nano-composites.
Izv.
Vyssh.
Uchebn.
Zaved.
Khim.
Khim.
Tekhnol.
2018.
V.
61.
N 3.
P.
45-50.

Related Results

The influence of nano-Fe on the electromagnetic shielding properties of nano-Fe/carbon fiber/LDPE composites
The influence of nano-Fe on the electromagnetic shielding properties of nano-Fe/carbon fiber/LDPE composites
AbstractNano-Fe/carbon fiber/ Low-density polyethylene (LDPE) composites were prepared by melt compounding. The electromagnetic shielding properties of nano-Fe/CF/LDPE composites a...
A Study on the Tribological Properties of Self-assembled Method Treated Nano-La 2O3 Filled PTFE/PEEK Composites
A Study on the Tribological Properties of Self-assembled Method Treated Nano-La 2O3 Filled PTFE/PEEK Composites
In this article, the surface of nanometer lanthanum oxide (nano-La 2O3) was modified with n-octadecyltrichlorosilane (OTS). Meanwhile, the influence of OTS on the tribological prop...
The Impact of Nano-fertilizers on Growth-attributing Characteristics in Transplanted Hybrid Rice (Oryza sativa L.)
The Impact of Nano-fertilizers on Growth-attributing Characteristics in Transplanted Hybrid Rice (Oryza sativa L.)
The experiment was conducted during the kharif season of 2022 and 2023 at Students’ Instructional Farm, Department of Agronomy, Chandra Shekhar Azad University of Agriculture &...
Effect of foliar application of nano-NPK and nano-micro elements on the growth, flowering, and biochemical composition of Zinnia elegans
Effect of foliar application of nano-NPK and nano-micro elements on the growth, flowering, and biochemical composition of Zinnia elegans
Zinnia elegans, a widely utilized flowering plant for pots, cut flowers, bouquets, and gardens, necessitates macro- and micro-nutrients for optimal growth, development, and floweri...
Investigating Nano-Fluid Mixture Effects to Enhance Oil Recovery
Investigating Nano-Fluid Mixture Effects to Enhance Oil Recovery
Abstract Nano-particles have been investigated in the last few years as a promising technique for enhanced oil recovery at laboratory scale. Different metal oxides n...
Flammability of nano silicon dioxide–wood fiber–polyethylene composites
Flammability of nano silicon dioxide–wood fiber–polyethylene composites
Nano silicon dioxide–wood fiber–high-density polyethylene composites were prepared to investigate the effects of nano silicon dioxide content (2, 4, 6, 8, and 10 wt%) on the relati...
Effect of optimized nitrogen management through conventional and nano-fertilizers on nutrient dynamics and finger millet yield
Effect of optimized nitrogen management through conventional and nano-fertilizers on nutrient dynamics and finger millet yield
Nitrogen and zinc nutrition significantly influence crop productivity. Foliar application, especially using nano-nitrogen and nano-zinc, enhances nutrient use efficiency and rapidl...
Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM
Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM
GF reinforced polymer composites to improve the mechanical properties by increasing fiber content, but there is a limit. On the contrary, CF reinforced polymer composites are super...

Back to Top