Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

A newly revised estimation of bulk densities and examination of the shape of individual Ryugu grains

View through CrossRef
Abstract The bulk density of grains from a celestial body is a fundamental property related to its composition and structure, contributing to the understanding of its evolutionary history. In this study, we provide the bulk density of 637 grains returned from the C-type near-Earth asteroid 162173 Ryugu. This is the largest number of grains to date for the curation activity, corresponding to 38 wt.% of the total returned samples (approximately 5.4 g). Although several densities of the Ryugu grains were reported, the volume estimation of some samples showed uncertainties. Therefore, we applied a new volume estimation model calibrated by X-ray micro-computed tomography (XCT) to the Ryugu grains to more accurately estimate their bulk density. The obtained average bulk density of 637 Ryugu grains was 1.79 ± 0.31 g/cm 3 (1 σ variation) for weights of 0.5‒100 mg (sub-mm ‒to 10 mm) irrespective of their 3D shapes characterized by three axial length ratios, considered to be a representative of the returned samples. The bulk density distributions of the grains in Chambers A and C were statistically distinguishable, with mean values of 1.81 ± 0.30 and 1.76 ± 0.33 g/cm 3 (1 σ variations), respectively. Despite the small difference, bulk density may have differed by sampling site. The obtained average bulk density value of A + C samples was almost the same as that of 16 Ryugu grains estimated based on CT scanned data, and was consistent with the densities of CI chondrites (1.57–1.91 g/cm 3 ). The axial ratios of the grains in Chambers A and C were similar and those of the 724 returned samples and the flying particles ejected during the sampling operations were also similar, suggesting that relatively small Ryugu materials (mm‒cm in size) are similar in shape. The minor difference between the Rygu grains and flying particles could be attributed to events such as scraping during sampling operations and transportation. Graphical Abstract
Title: A newly revised estimation of bulk densities and examination of the shape of individual Ryugu grains
Description:
Abstract The bulk density of grains from a celestial body is a fundamental property related to its composition and structure, contributing to the understanding of its evolutionary history.
In this study, we provide the bulk density of 637 grains returned from the C-type near-Earth asteroid 162173 Ryugu.
This is the largest number of grains to date for the curation activity, corresponding to 38 wt.
% of the total returned samples (approximately 5.
4 g).
Although several densities of the Ryugu grains were reported, the volume estimation of some samples showed uncertainties.
Therefore, we applied a new volume estimation model calibrated by X-ray micro-computed tomography (XCT) to the Ryugu grains to more accurately estimate their bulk density.
The obtained average bulk density of 637 Ryugu grains was 1.
79 ± 0.
31 g/cm 3 (1 σ variation) for weights of 0.
5‒100 mg (sub-mm ‒to 10 mm) irrespective of their 3D shapes characterized by three axial length ratios, considered to be a representative of the returned samples.
The bulk density distributions of the grains in Chambers A and C were statistically distinguishable, with mean values of 1.
81 ± 0.
30 and 1.
76 ± 0.
33 g/cm 3 (1 σ variations), respectively.
Despite the small difference, bulk density may have differed by sampling site.
The obtained average bulk density value of A + C samples was almost the same as that of 16 Ryugu grains estimated based on CT scanned data, and was consistent with the densities of CI chondrites (1.
57–1.
91 g/cm 3 ).
The axial ratios of the grains in Chambers A and C were similar and those of the 724 returned samples and the flying particles ejected during the sampling operations were also similar, suggesting that relatively small Ryugu materials (mm‒cm in size) are similar in shape.
The minor difference between the Rygu grains and flying particles could be attributed to events such as scraping during sampling operations and transportation.
Graphical Abstract.

Related Results

Present status of initial descriptions and distributions of Ryugu samples returned by Hayabusa2
Present status of initial descriptions and distributions of Ryugu samples returned by Hayabusa2
<p><strong>Introduction:</strong> Hayabusa2 spacecraft returned samples from near-Earth C-type asteroid 162173 Ryugu to the Earth on 6 Dec...
A newly revised estimation of bulk densities and examination of the shape of individual Ryugu grains
A newly revised estimation of bulk densities and examination of the shape of individual Ryugu grains
Abstract The bulk density of grains from a celestial body is a fundamental property related to its composition and structure, providing a clue to understand the evolutionar...
Photometric properties of Ryugu and its artificial impact crater
Photometric properties of Ryugu and its artificial impact crater
Introduction:  The JAXA’s Hayabusa2 mission [1] rendezvoused with the Ryugu near Earth, C-type asteroid from June 2018 to November 2019, performing two touchdown...
Characterizing the MASCOT landing area with Hayabusa2: Linking the MASCOT rock to the Ryugu samples
Characterizing the MASCOT landing area with Hayabusa2: Linking the MASCOT rock to the Ryugu samples
<p><strong>Background</strong></p> <p>After landing on Ryugu, The Mobile Asteroid surface SCOuT (MASCOT) settl...
The Formation of Troughs on Rubble-Pile Asteroids Ryugu and Dinkinesh
The Formation of Troughs on Rubble-Pile Asteroids Ryugu and Dinkinesh
Introduction:  Top-shaped asteroids, characterized by their equatorial ridges resembling spinning tops, are common in the solar system. The Hayabusa2 mission's close-up ob...
The asteroid 162173 Ryugu: a cometary origin
The asteroid 162173 Ryugu: a cometary origin
Abstract The Japanese Hayabusa2 mission has revealed in detail the physical characteristics of the C-type asteroid 162173 Ryugu, in particular, its spinning top-shaped rubb...
The Asteroid 162173 Ryugu: a Cometary Origin
The Asteroid 162173 Ryugu: a Cometary Origin
Abstract The Japanese Hayabusa2 mission has revealed in detail the physical characteristics of the C-type asteroid 162173 Ryugu, in particular, its spinning top-s...

Back to Top