Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Crystallization and refluidization in very-narrow fluidized beds

View through CrossRef
Fluidization of solid particles by an ascending fluid is frequent in industry because of the high rates of mass and heat transfers achieved. However, in some cases, blockages occur and hinder the correct functioning of the fluidized bed. In this paper, we investigate the crystallization (defluidization) and refluidization that take place in very-narrow solid–liquid fluidized beds under steady flow conditions. For that, we carried out experiments where either monodisperse or bidisperse beds were immersed in water flows whose velocities were above those necessary for fluidization, and the ratio between the tube and grain diameters was smaller than 6. For monodisperse beds consisting of regular spheres, we observed that crystallization and refluidization alternate successively along time, which we quantify in terms of macroscopic structures and agitation of individual grains. We found the characteristic times for crystallization and propose a new macroscopic parameter quantifying the degree of bed agitation. The bidisperse beds consisted of less regular spheres placed on the bottom of a layer of regular spheres (the latter was identical to the monodisperse beds tested). We measured the changes that macroscopic structures and agitation of grains undergo and show that the higher agitation in the bottom-layer hinders crystallization of the top layer. Our results bring new insights into the dynamics of very-narrow beds, in addition to proposing a way of mitigating defluidization.
Title: Crystallization and refluidization in very-narrow fluidized beds
Description:
Fluidization of solid particles by an ascending fluid is frequent in industry because of the high rates of mass and heat transfers achieved.
However, in some cases, blockages occur and hinder the correct functioning of the fluidized bed.
In this paper, we investigate the crystallization (defluidization) and refluidization that take place in very-narrow solid–liquid fluidized beds under steady flow conditions.
For that, we carried out experiments where either monodisperse or bidisperse beds were immersed in water flows whose velocities were above those necessary for fluidization, and the ratio between the tube and grain diameters was smaller than 6.
For monodisperse beds consisting of regular spheres, we observed that crystallization and refluidization alternate successively along time, which we quantify in terms of macroscopic structures and agitation of individual grains.
We found the characteristic times for crystallization and propose a new macroscopic parameter quantifying the degree of bed agitation.
The bidisperse beds consisted of less regular spheres placed on the bottom of a layer of regular spheres (the latter was identical to the monodisperse beds tested).
We measured the changes that macroscopic structures and agitation of grains undergo and show that the higher agitation in the bottom-layer hinders crystallization of the top layer.
Our results bring new insights into the dynamics of very-narrow beds, in addition to proposing a way of mitigating defluidization.

Related Results

Crystallization Kinetics Of Coconut Oil Based On Gompertz Model
Crystallization Kinetics Of Coconut Oil Based On Gompertz Model
The cooling rate and temperature of crystallization has been proven to be very influential on the rate of crystal formation oil. Oil crystallization kinetics can be measured by mon...
Fluidization
Fluidization
Abstract Fluidization is the art of handling a solid as if it were a fluid. To fluidize solid particles, a gas or a liquid flows up through a particle bed at such a rate ...
Fluidization
Fluidization
Abstract Fluidization is the art of handling a solid as if it were a fluid. To fluidize solid particles, a gas or a liquid flows up through a particle bed at such a rate ...
Directed polymer crystallization at liquid interfaces
Directed polymer crystallization at liquid interfaces
Liquid-liquid and liquid-air interfaces are crucial to study amphiphile and colloidal self-assembly. Crystallization of polymers can also be regarded as a self-assembly process. In...
Combustion Efficiency in a Fluidized-Bed Combustor with a Modified Perforated Plate for Air Distribution
Combustion Efficiency in a Fluidized-Bed Combustor with a Modified Perforated Plate for Air Distribution
Combustion efficiency is one of the most important parameters especially in the fluidized-bed combustor. Investigations into the efficiency of combustion in fluidized-bed combustor...
A study of stability of difference scheme of Markov counting chain method for fluidization modeling
A study of stability of difference scheme of Markov counting chain method for fluidization modeling
Devices with a fluidized bed of granular material are applied in many energy power technology processes. The fluidized bed is a heterogeneous system, so mathematical models assumin...
Solids Flow Characterization in Bubbling Fluidized Beds with Induced Horizontal Circulation
Solids Flow Characterization in Bubbling Fluidized Beds with Induced Horizontal Circulation
Bubbling fluidized beds with horizontal solids crossflow can be broadly grouped according to function: 1) those designed for solids looping, as in indirect pyrolysis or gasificatio...
Microstructural characterization and modelling in primary crystallization
Microstructural characterization and modelling in primary crystallization
L'objectiu de la tesi és estudiar la cinètica de les cristal·litzacions primàries en vidres metàl·lics mitjançant simulacions de tipus phase field. Una cristal·lització primària és...

Back to Top