Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

2019 Mw 5.9 Mirpur, Pakistan Earthquake: Insights from Integrating Geodetic, Seismic, and Field Observations

View through CrossRef
Abstract On 24 September 2019, an Mw 5.9 earthquake struck near the Mangla reservoir in northeastern Pakistan and resulted in 39 fatalities and 746 serious injuries, making it the deadliest earthquake in the region since the 2005 Mw 7.6 Kashmir earthquake. Here, we integrate geodetic, seismic, and field observations to characterize the source properties and impact of the Mirpur earthquake as well as investigate whether it might be a reservoir-induced event. From inverting Interferometric Synthetic Aperture Radar data, we find that a fault with strike ∼310°, dip ∼6°, and rake ∼117° is the optimal source, with slip concentrated between 5 and 6 km depth. This is consistent with our relocated aftershocks depth distribution and the lack of surface rupture observed in the field. Therefore, we infer that the earthquake ruptured the Main Himalayan Thrust (MHT). The event’s shallow depth might explain the extensive damage caused despite its moderate magnitude, with a maximum shaking intensity of VIII based on our field survey. The survey also revealed extensive damages associated with earthquake-induced liquefaction. Our modeling shows that loading due to increased reservoir water level in the three months before the Mirpur earthquake led to Coulomb stress increase of ∼7–10 kPa on the rupture plane. However, this effect is ∼10 times smaller than the Coulomb stress increase due to the 2006 Mangla earthquake, and the Mirpur earthquake only occurred ∼1–2 weeks after peak water level. These suggest that pore pressure diffusion contributed to promoting the fault rupture at a time when it is close to failure due to accumulated stress from inter-seismic loading. Because the Mirpur earthquake resulted in a stress increase of >0.2 MPa on the surrounding sections of the MHT and nearby faults, future rupture of these faults is a significant hazard and proper management of reservoir operations is necessary to prevent further elevating the seismic risk.
Title: 2019 Mw 5.9 Mirpur, Pakistan Earthquake: Insights from Integrating Geodetic, Seismic, and Field Observations
Description:
Abstract On 24 September 2019, an Mw 5.
9 earthquake struck near the Mangla reservoir in northeastern Pakistan and resulted in 39 fatalities and 746 serious injuries, making it the deadliest earthquake in the region since the 2005 Mw 7.
6 Kashmir earthquake.
Here, we integrate geodetic, seismic, and field observations to characterize the source properties and impact of the Mirpur earthquake as well as investigate whether it might be a reservoir-induced event.
From inverting Interferometric Synthetic Aperture Radar data, we find that a fault with strike ∼310°, dip ∼6°, and rake ∼117° is the optimal source, with slip concentrated between 5 and 6 km depth.
This is consistent with our relocated aftershocks depth distribution and the lack of surface rupture observed in the field.
Therefore, we infer that the earthquake ruptured the Main Himalayan Thrust (MHT).
The event’s shallow depth might explain the extensive damage caused despite its moderate magnitude, with a maximum shaking intensity of VIII based on our field survey.
The survey also revealed extensive damages associated with earthquake-induced liquefaction.
Our modeling shows that loading due to increased reservoir water level in the three months before the Mirpur earthquake led to Coulomb stress increase of ∼7–10 kPa on the rupture plane.
However, this effect is ∼10 times smaller than the Coulomb stress increase due to the 2006 Mangla earthquake, and the Mirpur earthquake only occurred ∼1–2 weeks after peak water level.
These suggest that pore pressure diffusion contributed to promoting the fault rupture at a time when it is close to failure due to accumulated stress from inter-seismic loading.
Because the Mirpur earthquake resulted in a stress increase of >0.
2 MPa on the surrounding sections of the MHT and nearby faults, future rupture of these faults is a significant hazard and proper management of reservoir operations is necessary to prevent further elevating the seismic risk.

Related Results

The Role of the Judiciary in Constitutional Interpretation in Pakistan
The Role of the Judiciary in Constitutional Interpretation in Pakistan
This study examines the evolving role of the judiciary in Pakistan in interpreting the Constitution, exploring how the courts have come to terms with their position as the primary ...
Analysis of Seismic Cycle Deformation for the Ms7.1 Wushi Earthquake in Xinjiang Based on Geodetic Data
Analysis of Seismic Cycle Deformation for the Ms7.1 Wushi Earthquake in Xinjiang Based on Geodetic Data
On January 23, 2024, an Ms7.1 earthquake struck Wushi County, Aksu Prefecture, Xinjiang. While resulting in relatively limited casualties and economic losses, the event posed a cer...
The upper connected edge geodetic number of a graph
The upper connected edge geodetic number of a graph
For a non-trivial connected graph G, a set S ? V (G) is called an edge geodetic set of G if every edge of G is contained in a geodesic joining some pair of vertices in S. The...
APPLICATION OF SEISMOLOGY-BASED VOLCANO MONITORING TECHNIQUES AT WHAKAARI/WHITE ISLAND VOLCANO
APPLICATION OF SEISMOLOGY-BASED VOLCANO MONITORING TECHNIQUES AT WHAKAARI/WHITE ISLAND VOLCANO
Volcanoes present some of the most immediate and unpredictable natural hazards, particularly when they erupt without clear precursors. Phreatic and phreatomagmatic eruptions are es...
A unified geodetic data-based earthquake catalog of Taiwan from 2006 to 2018
A unified geodetic data-based earthquake catalog of Taiwan from 2006 to 2018
A unified geodetic data-based earthquake catalog may provide the asperity information to improve the seismic hazard assessment. Therefore, we propose a unified geodetic data-based ...
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Seismic Frequency Enhancement for Mapping and Reservoir Characterization of Arab Formation: Case Study Onshore UAE
Abstract Mapping and discrimination of Upper Jurassic Arab reservoirs (Arab A/B/C and D) in this 3D seismic onshore field of Abu Dhabi, is very sensitive to the seis...
4D Seismic on Gullfaks
4D Seismic on Gullfaks
SUMMARY New technologies are rapidly emerging helping to obtain optimal drainage of large reservoirs. 4D seismic is such a reservoir monitoring technique. The phy...
RUPTURE DISTRIBUTION OF THE 1976 TANGSHAN EARTHQUAKE SEQUENCE INVERTED FROM GEODETIC DATA
RUPTURE DISTRIBUTION OF THE 1976 TANGSHAN EARTHQUAKE SEQUENCE INVERTED FROM GEODETIC DATA
AbstractThe Tangshan 1976 M7.8 earthquake was followed by two large aftershocks (the Luanxian M7.1 earthquake and the Ninghe M6.9 earthquake). The earthquake sequence occurred in a...

Back to Top