Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
AE Evaluation of Relationship between AE Signals and Fracture Mechanisms for the Weldment of Pressure Vessel Steel
View through CrossRef
The purpose of this study is to find out the AE characteristics and fracture mechanisms
through AE signal analysis for the weldment, PWHT specimen and basemetal of the pressure vessel
steel. Charpy sized specimens were taken from the multi-passed weld block. Specimens were given
to four point bend and AE tests. Lots of AE signals were emitted from the weldment compared with
the basemetal and PWHT specimen. Besides, amplitude for the weldment was the largest, followed
by PWHT specimen and basemetal and more AE counts for the weldment were emitted in the
process of deformation. Lots of microcracks around the notch for the weldment were formed so that
more AE signals were produced. In addition, second phase particle such as MgO for the basemetal
acts as AE source. However, in case of weldment, debonding mechanisms between matrix and hard
oxides which are formed during welding in air attributed to the emission of AE signals and softened
particles for the PWHT specimen cause to produce the low level AE signals.
Trans Tech Publications, Ltd.
Title: AE Evaluation of Relationship between AE Signals and Fracture Mechanisms for the Weldment of Pressure Vessel Steel
Description:
The purpose of this study is to find out the AE characteristics and fracture mechanisms
through AE signal analysis for the weldment, PWHT specimen and basemetal of the pressure vessel
steel.
Charpy sized specimens were taken from the multi-passed weld block.
Specimens were given
to four point bend and AE tests.
Lots of AE signals were emitted from the weldment compared with
the basemetal and PWHT specimen.
Besides, amplitude for the weldment was the largest, followed
by PWHT specimen and basemetal and more AE counts for the weldment were emitted in the
process of deformation.
Lots of microcracks around the notch for the weldment were formed so that
more AE signals were produced.
In addition, second phase particle such as MgO for the basemetal
acts as AE source.
However, in case of weldment, debonding mechanisms between matrix and hard
oxides which are formed during welding in air attributed to the emission of AE signals and softened
particles for the PWHT specimen cause to produce the low level AE signals.
Related Results
Stochastic Propagation of Discrete Fracture Networks
Stochastic Propagation of Discrete Fracture Networks
This reference is for an abstract only. A full paper was not submitted for this conference.
Abstract
Fractures are ubiquitous st...
Sequential Propagation of Multiple Fractures in Horizontal Wells
Sequential Propagation of Multiple Fractures in Horizontal Wells
ABSTRACT:
Simultaneous fracturing and zipper fracturing of horizontal wells has rapidly evolved to the development of unconventional oil and gas. The fracture int...
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Abstract
In this paper, a case study in a fractured carbonate reservoir is presented to demonstrate the approach of fracture modeling using fracture intensity vol...
Complexity of Minifrac Tests and Implications for in-Situ Horizontal Stresses in Coalbed Methane Reservoirs
Complexity of Minifrac Tests and Implications for in-Situ Horizontal Stresses in Coalbed Methane Reservoirs
Abstract
Minifrac tests are used to obtain key parameters of reservoirs for geomechanical modeling and hydraulic fracture treatment design. An ideal minifrac test...
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
Experimental Investigation on the Effects of Proppant Migration and Placement on the Conductivity in Rough Fractures
ABSTRACT
Proppant conductivity was usually measured under static or designed proppant concentration. The ISO 13503-5 standard provides specific experimental proce...
Blunt Chest Trauma and Chylothorax: A Systematic Review
Blunt Chest Trauma and Chylothorax: A Systematic Review
Abstract
Introduction: Although traumatic chylothorax is predominantly associated with penetrating injuries, instances following blunt trauma, as a rare and challenging condition, ...
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Evaluation of fluid storage and flow capacity of a fractured rock system needs a comprehensive characterization of all the fracture properties. These properties include the fractur...
Proppant Transport
Proppant Transport
Novotny, E.J., Member of SPE-AIME, Exxon Production Research Co.
Abstract
A method is presented for predicting:the transport of ...