Javascript must be enabled to continue!
Intelligent Completion in Extended Well Test
View through CrossRef
Abstract
This paper describes the wells completion design, operational performance and use of intelligent completion by Libra Consortium for EWT wells. Additionally, it will describe new technologies that will support the full field development.
The paper presents the de-risking plan EWT Program implementation to help full field development, which consists up to four ultra-deepwater mega projects. The EWT wells were assumed as keepers, thus designed as convertible, with metallurgy requirements for both oil production and Water Alternating Gas injection. The intelligent completion, with multi-position valves for each production zone, was selected to allow choking-back gas coning, early gas breakthrough or water production in one zone, while another remains opened. These valves were useful to determine vertical communication between different reservoir zones, making it possible to have buildup in one zone while producing another.
Four appraisal wells were completed, for the EWT program up to now, using a full-dual rig. Three of the completions were in sequence, providing a sound learning curve with a significant time reduction, and no installation problems. It was noticeable a correlation between improvement in operational efficiency and a decrease in HSE incidents. The use of intelligent completion made possible an efficient well stimulation, avoiding inter-zonal communication during the acid job. A production rate higher than 60 kboe/day was reached and 100 MM scf/day gas was re-injected. This injection rate implied risk of control lines fatigue due to induced vibration, therefore a Computational Fluid Dynamics (CFD) study was required to determine the maximum injection rate. The Operator implemented mitigation measures for intelligent completion valves actuation since some operational difficulties were observed during the EWT. These situations did not affect the EWT information acquisition plan, but represented significant operational experience for Mero Field future development projects, where multiplexed intelligent completions and open-hole intelligent completion are being also considered.
The approach taken by Libra Consortium helps to gain early experience about well design for carbonate reservoirs and intelligent completion behavior, with high CO2 and GOR, where gas re-injection is a necessity and the use of intelligent completion is a mandatory strategy. The performance of the completion design fitted the field evaluation purpose and the wells will be successfully used as keepers.
Title: Intelligent Completion in Extended Well Test
Description:
Abstract
This paper describes the wells completion design, operational performance and use of intelligent completion by Libra Consortium for EWT wells.
Additionally, it will describe new technologies that will support the full field development.
The paper presents the de-risking plan EWT Program implementation to help full field development, which consists up to four ultra-deepwater mega projects.
The EWT wells were assumed as keepers, thus designed as convertible, with metallurgy requirements for both oil production and Water Alternating Gas injection.
The intelligent completion, with multi-position valves for each production zone, was selected to allow choking-back gas coning, early gas breakthrough or water production in one zone, while another remains opened.
These valves were useful to determine vertical communication between different reservoir zones, making it possible to have buildup in one zone while producing another.
Four appraisal wells were completed, for the EWT program up to now, using a full-dual rig.
Three of the completions were in sequence, providing a sound learning curve with a significant time reduction, and no installation problems.
It was noticeable a correlation between improvement in operational efficiency and a decrease in HSE incidents.
The use of intelligent completion made possible an efficient well stimulation, avoiding inter-zonal communication during the acid job.
A production rate higher than 60 kboe/day was reached and 100 MM scf/day gas was re-injected.
This injection rate implied risk of control lines fatigue due to induced vibration, therefore a Computational Fluid Dynamics (CFD) study was required to determine the maximum injection rate.
The Operator implemented mitigation measures for intelligent completion valves actuation since some operational difficulties were observed during the EWT.
These situations did not affect the EWT information acquisition plan, but represented significant operational experience for Mero Field future development projects, where multiplexed intelligent completions and open-hole intelligent completion are being also considered.
The approach taken by Libra Consortium helps to gain early experience about well design for carbonate reservoirs and intelligent completion behavior, with high CO2 and GOR, where gas re-injection is a necessity and the use of intelligent completion is a mandatory strategy.
The performance of the completion design fitted the field evaluation purpose and the wells will be successfully used as keepers.
Related Results
Provocative Tests in Diagnosis of Thoracic Outlet Syndrome: A Narrative Review
Provocative Tests in Diagnosis of Thoracic Outlet Syndrome: A Narrative Review
Abstract
Thoracic outlet syndrome (TOS) is a group of conditions caused by the compression of the neurovascular bundle within the thoracic outlet. It is classified into three main ...
Flow Analysis: A Critical Step in Completion Design and Optimization. A Case Study of Multizone Completion Designs
Flow Analysis: A Critical Step in Completion Design and Optimization. A Case Study of Multizone Completion Designs
Abstract
Multizone completion systems are used worldwide as an efficient method to maximize reserves recovery. There are several assets in the deepwater Gulf of Mexi...
Recent Innovations in Offshore Completion and Workover Systems
Recent Innovations in Offshore Completion and Workover Systems
ABSTRACT
Humble Oil &Refining Company has developed an offshore completion and workover system, for use with multi-well fixed platform development, which util...
Pioneering Hydraulic Wet-Mate Connection in Intelligent Completions with ESP: A Case Study of 70 Successful Deployments
Pioneering Hydraulic Wet-Mate Connection in Intelligent Completions with ESP: A Case Study of 70 Successful Deployments
Abstract
The operator sought a cost-effective solution to integrate intelligent completions into wells equipped with Electrical Submersible Pumps (ESP), aiming to en...
Isoniazid preventive therapy completion and factors associated with non-completion among patients on antiretroviral therapy at Kisenyi Health Centre IV, Kampala, Uganda
Isoniazid preventive therapy completion and factors associated with non-completion among patients on antiretroviral therapy at Kisenyi Health Centre IV, Kampala, Uganda
Abstract
Background
Isoniazid preventive therapy (IPT) is given to HIV patients to reduce the risk of active tuberculosis (TB)....
A New Approach to Completing a Previously Drilled Subsea Well
A New Approach to Completing a Previously Drilled Subsea Well
ABSTRACT
Offshore operators tie successful subsea exploratory wells into field plans when possible and have used a variety of adaptation bases to complete the wel...
New Downhole Wet-Mate Design Resulted in Capex Reduction
New Downhole Wet-Mate Design Resulted in Capex Reduction
Abstract
Intelligent completions in multizone wells require hydraulic control lines connected to the surface to maintain functionality. To reduce capital expenditure...
Novel Workflow to Optimise Annular Flow Isolation in Advanced Wells
Novel Workflow to Optimise Annular Flow Isolation in Advanced Wells
Abstract
Advanced well completion with multiple, downhole flow control devices such as Inflow Control Devices (ICDs), are a proven and effective solution to mitig...

