A Study of Palm Oil-Methanol Mixing in a Stirred Tank Equipped with a Fractal Baffles

Palm oil and methanol do not form a single phase mixture in transesterification process in stirred tank due to a poor surface contact between them; hence give a relatively slow mixing process of the mixing. Introduction of new baffles in the stirred tank with a fractal pattern due to the fractal shape can give a high turbulent level when a fluid flow through the fractal pattern is the new idea in optimizing the using of the fractal pattern in engineering especially in mixing industries. Hence, in the present study, a new concept of baffles with a fractal design was proposed to enhance a palm oil-methanol mixing in stirred tank. In order to achieve the objective, the simulation of palm oil-methanol mixing was carried out by using ANSYS Fluent software. The simulation was carrying out primarily in the stirred tank equipped with the fractal baffles and the levels of mixing were observed at 60, 120, 180 and 240 seconds after the beginning of introduction of methanol in the stirred tank. An effectiveness of the fractal baffles will be evaluated by determining the Coefficient of Variation (COV). The simulation results also were compared in term of homogeneity level of palm oil-methanol mixing to the normal baffles in order to determine the significant effect of the fractal baffles. Based on the simulation results, the value of COV for the mixing process in the stirred tank equipped with fractal baffles at the selected time interval are 0.066, 0.0436, 0.0326 and 0.0226 respectively. Since the values of COV between 0.01 and 0.05 are a reasonable target for many industry applications, the results for new approach of stirred tank with fractal baffles represent completely homogeneous mixing for the palm oil-methanol simulated in this study. Definitely this new approach of fractal baffles gave better results because of lower number of COV compared to the stirred tank with normal baffles.