Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
The Selection of Thermistors for the Temperature Measurement Gear
View through CrossRef
The parameters represented on manufacturer datasheet are usually insufficient for the optimum selection of thermistors. Some manufacturers give generalized numerical data of R(T) dependences. Using this data it is possible to select successfully the most suitable thermistor and equation for describing of T(R) dependence. It is shown that by selecting four points in the generalized characteristic it is possible to calculate the coefficients of the approximation equation. By the application of these coefficients in the calculations the temperature measurement errors can be decreased by an order. The results of calculations and experiment are given. Ill. 4, bibl. 8, tabl. 5 (in English; abstracts in English and Lithuanian).http://dx.doi.org/10.5755/j01.eee.111.5.357
Kaunas University of Technology (KTU)
Title: The Selection of Thermistors for the Temperature Measurement Gear
Description:
The parameters represented on manufacturer datasheet are usually insufficient for the optimum selection of thermistors.
Some manufacturers give generalized numerical data of R(T) dependences.
Using this data it is possible to select successfully the most suitable thermistor and equation for describing of T(R) dependence.
It is shown that by selecting four points in the generalized characteristic it is possible to calculate the coefficients of the approximation equation.
By the application of these coefficients in the calculations the temperature measurement errors can be decreased by an order.
The results of calculations and experiment are given.
Ill.
4, bibl.
8, tabl.
5 (in English; abstracts in English and Lithuanian).
http://dx.
doi.
org/10.
5755/j01.
eee.
111.
5.
357.
Related Results
Stability of Negative Resistance Coefficient Thermistors for Long-term Temperature Measurement
Stability of Negative Resistance Coefficient Thermistors for Long-term Temperature Measurement
The NTC (negative temperature coefficient) thermistor precision is significantly increased by the calibration process. The full calibration procedure process itself is sophisticate...
Hypoid Gear Design Beyond Conventional Approach
Hypoid Gear Design Beyond Conventional Approach
Conventional hypoid gear design approach utilizes specific commercial programs provided by gear machine providers. Those programs typically have a set of assumptions as the startin...
Analysis of tooth stiffness of nutation face gear
Analysis of tooth stiffness of nutation face gear
Purpose
The purpose of this paper is to obtain the single-tooth stiffness, single-tooth time-varying meshing stiffness and comprehensive meshing stiffness of th...
Manufacture of Bamboo Spur Gear and the Dynamic Performance
Manufacture of Bamboo Spur Gear and the Dynamic Performance
Abstract
This paper describes the manufacture of bamboo spur gears using bamboo powder and their dynamic performance. This research was compared the accuracy and dynamic pe...
Model-Based Fault Diagnosis of a Planetary Gear Using Transmission Error
Model-Based Fault Diagnosis of a Planetary Gear Using Transmission Error
A Planetary gear can transmit high torque ratio stably and, therefore, the gear is widely used in industrial applications, i.e., wind turbines, automobiles, he...
Simulation of Accessory Drives Bevel Gears Dynamic Conditions
Simulation of Accessory Drives Bevel Gears Dynamic Conditions
Bevel gears of modern aviation motors operate at high rotation velocities and transmitted torques. High dynamic load in bevel mesh due to impact interaction of teeth in contact act...
Aporte al diseño de engranajes no circulares cilíndricos rectos
Aporte al diseño de engranajes no circulares cilíndricos rectos
En multitud de aplicaciones, es de interés obtener relaciones de transmisión variables a lo largo de un ciclo de rotación del eslabón conductor. Éstas pueden obtenerse mediante dis...
Fabrication and characterization of screen printed NiMn2O4 spinel based thermistors
Fabrication and characterization of screen printed NiMn2O4 spinel based thermistors
Purpose
The purpose of this work was to characterize NiMn2O4 spinel-based thermistor powder, to use it in screen printing technology to fabricate temperature sensors, to study thei...