Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Noble Metals Deposited LaMnO3 Nanocomposites for Photocatalytic H2 Production

View through CrossRef
Due to the growing demand for hydrogen, the photocatalytic hydrogen production from alcohols present an intriguing prospect as a potential source of low-cost renewable energy. The noble metals (Ag, Au, Pd and Pt) deposited LaMnO3 nanocomposites were synthesized by a non-conventional green bio-reduction method using aqueous lemon peel extract, which acts as both reducing and capping agent. The successful deposition of the noble metals on the surface of LaMnO3 was verified by using powder XRD, FTIR, TEM, N2-physisorption, DR UV-vis spectroscopy, and XPS techniques. The photocatalytic activity of the synthesized nanocomposites was tested for photocatalytic H2 production under visible light irradiation. Different photocatalytic reaction parameters such as reaction time, pH, catalyst mass and reaction temperature were investigated to optimize the reaction conditions for synthesized nanocomposites. Among the synthesized noble metal deposited LaMnO3 nanocomposites, the Pt-LaMnO3 nanocomposite offered superior activity for H2 production. The enhanced photocatalytic activity of the Pt-LaMnO3 was found as a result from low bandgap energy, high photoelectrons generation and enhanced charge separation due to deposition of Pt nanoparticles. The effective noble metal deposition delivers a new route for the development of plasmonic noble metal-LaMnO3 nanocomposites for photocatalytic reforming of aqueous methanol to hydrogen.
Title: Noble Metals Deposited LaMnO3 Nanocomposites for Photocatalytic H2 Production
Description:
Due to the growing demand for hydrogen, the photocatalytic hydrogen production from alcohols present an intriguing prospect as a potential source of low-cost renewable energy.
The noble metals (Ag, Au, Pd and Pt) deposited LaMnO3 nanocomposites were synthesized by a non-conventional green bio-reduction method using aqueous lemon peel extract, which acts as both reducing and capping agent.
The successful deposition of the noble metals on the surface of LaMnO3 was verified by using powder XRD, FTIR, TEM, N2-physisorption, DR UV-vis spectroscopy, and XPS techniques.
The photocatalytic activity of the synthesized nanocomposites was tested for photocatalytic H2 production under visible light irradiation.
Different photocatalytic reaction parameters such as reaction time, pH, catalyst mass and reaction temperature were investigated to optimize the reaction conditions for synthesized nanocomposites.
Among the synthesized noble metal deposited LaMnO3 nanocomposites, the Pt-LaMnO3 nanocomposite offered superior activity for H2 production.
The enhanced photocatalytic activity of the Pt-LaMnO3 was found as a result from low bandgap energy, high photoelectrons generation and enhanced charge separation due to deposition of Pt nanoparticles.
The effective noble metal deposition delivers a new route for the development of plasmonic noble metal-LaMnO3 nanocomposites for photocatalytic reforming of aqueous methanol to hydrogen.

Related Results

Magnetic characteristics of LaMnO3+δ thin films deposited by RF magnetron sputtering in an O2/Ar mixture gas
Magnetic characteristics of LaMnO3+δ thin films deposited by RF magnetron sputtering in an O2/Ar mixture gas
Abstract In this work, LaMnO3+δ thin films have been successfully fabricated by RF magnetron sputtering using different O2/Ar flux ratios. The cry...
Trace Mercury Ion Detection Sensor Employing SnO2/Rgo Nanocomposites Modified Electrode
Trace Mercury Ion Detection Sensor Employing SnO2/Rgo Nanocomposites Modified Electrode
Introduction Heavy metal pollution seriously affects human health. Mercury is one of the most hazardous pollution, it has been accum...
Microstructural Characterization of Al/CNTs Nanocomposites after Cold Rolling
Microstructural Characterization of Al/CNTs Nanocomposites after Cold Rolling
The deformation behaviour of aluminium reinforced by carbon nanotubes (Al/CNTs) nanocomposites during cold rolling was investigated in this work. Deformation processes after produc...
Ekonomika bosanskih velikaša u 14. i 15. stoljeću
Ekonomika bosanskih velikaša u 14. i 15. stoljeću
The role and significance of the Bosnian nobility in the historical currents of medieval Bosnia can be reliably traced in the 14th and 15th centuries when various socio-political f...
Dynamic Mechanical Properties of MWNTs/Phenolic Nanocomposites
Dynamic Mechanical Properties of MWNTs/Phenolic Nanocomposites
Two different types of multi-walled carbon nanotube (MWNT), the dispersed and the network MWNTs, were used to reinforce the phenolic resin. The MWNTs/phenolic nanocomposites were t...
Facile Fabrication of PANI/Fe2.85Ni0.15O4 Nanocomposites and Their Application for the Effective Degradation of Rhodamine B Dye
Facile Fabrication of PANI/Fe2.85Ni0.15O4 Nanocomposites and Their Application for the Effective Degradation of Rhodamine B Dye
Nanocomposites of polyaniline (PANI)/Fe2.85Ni0.15O4 (PFN) were successfully prepared using the co-precipitation method combined with an in-situ polymerization process. The FN and P...
Nanoparticles and Significance of Photocatalytic Nanoparticles in Wastewater Treatment: A Review
Nanoparticles and Significance of Photocatalytic Nanoparticles in Wastewater Treatment: A Review
Background: In the present situation where there is a water shortage globally, nanoparticles can play a vital role in treating wastewater to make it usable for several processes. I...
Photocatalytic Activity of One-Pot Synthesized Reduced Graphene Oxide – Zinc Oxide Nanocomposites
Photocatalytic Activity of One-Pot Synthesized Reduced Graphene Oxide – Zinc Oxide Nanocomposites
In this research, reduced graphene oxide/zinc oxide nanocomposites (rGO/ZnO) were synthesized at different pHs (9, 10, 11 and 12) by using one-pot hydrothermal bath method., The ob...

Back to Top