Javascript must be enabled to continue!
Remodelling of the palatal dome following rapid maxillary expansion (RME): laser scan‐quantifications during a low growth period
View through CrossRef
Muchitsch A. P., Winsauer H., Wendl B., Pichelmayer M., Kuljuh E., Szalay A., Muchitsch M. Remodelling of the palatal dome following rapid maxillary expansion (RME): laser scan‐quantifications during a low growth period.
Orthod Craniofac Res 2012;15:30–38 © John Wiley & Sons A/SStructured AbstractObjectives – To evaluate changes in the palatal vault after rapid maxillary expansion (RME) with bonded splint appliances.Setting and Sample Population – The sample comprised 24 children (12 boys and 12 girls) with mixed dentition (mean age 8.3 years; range 6.4–10.4 years).Materials and Methods – Following expansion, the splint appliance was used as a retainer for 6 months and then removed. Study casts were taken before RME (T0) and when the appliance was removed (T1). Then, 3D laser scans were taken to build complete 3D jaw models. Frontal cross sections were constructed at 53–63, 55–65 and 16–26, exported as coordinates, and finite element calculated to quantify their area, width and height. Maxillary length was also determined.Results – Paired t‐tests indicated statistically significant increases in the average palatal width (T1–T0 = 6.53–6.79 mm) and cross‐sectional area (T1–T0 = 20.39–21.39 mm2) after RME (p < 0.001). However, small but statistically significant reductions were observed in palatal height (T1–T0 = −0.49 mm, only at 55–65; p < 0.001) and length (T1–T0 = −0.54 mm; p < 0.01). Linear regression analysis showed statistically significant (p < 0.001) direct correlations between the widths and respective cross‐sectional areas. Age did not influence any measurement. The reliability of the measurements was examined with an intraclass correlation coefficient (ICC). We found an ICC > 0.99 (p < 0.001) for all tested parameters.Conclusions – Rapid maxillary expansion distinctly increased mean palatal widths and cross‐sectional areas. However, palatal height (55–65) and maxillary length decreased to a small extent.
Title: Remodelling of the palatal dome following rapid maxillary expansion (RME): laser scan‐quantifications during a low growth period
Description:
Muchitsch A.
P.
, Winsauer H.
, Wendl B.
, Pichelmayer M.
, Kuljuh E.
, Szalay A.
, Muchitsch M.
Remodelling of the palatal dome following rapid maxillary expansion (RME): laser scan‐quantifications during a low growth period.
Orthod Craniofac Res 2012;15:30–38 © John Wiley & Sons A/SStructured AbstractObjectives – To evaluate changes in the palatal vault after rapid maxillary expansion (RME) with bonded splint appliances.
Setting and Sample Population – The sample comprised 24 children (12 boys and 12 girls) with mixed dentition (mean age 8.
3 years; range 6.
4–10.
4 years).
Materials and Methods – Following expansion, the splint appliance was used as a retainer for 6 months and then removed.
Study casts were taken before RME (T0) and when the appliance was removed (T1).
Then, 3D laser scans were taken to build complete 3D jaw models.
Frontal cross sections were constructed at 53–63, 55–65 and 16–26, exported as coordinates, and finite element calculated to quantify their area, width and height.
Maxillary length was also determined.
Results – Paired t‐tests indicated statistically significant increases in the average palatal width (T1–T0 = 6.
53–6.
79 mm) and cross‐sectional area (T1–T0 = 20.
39–21.
39 mm2) after RME (p < 0.
001).
However, small but statistically significant reductions were observed in palatal height (T1–T0 = −0.
49 mm, only at 55–65; p < 0.
001) and length (T1–T0 = −0.
54 mm; p < 0.
01).
Linear regression analysis showed statistically significant (p < 0.
001) direct correlations between the widths and respective cross‐sectional areas.
Age did not influence any measurement.
The reliability of the measurements was examined with an intraclass correlation coefficient (ICC).
We found an ICC > 0.
99 (p < 0.
001) for all tested parameters.
Conclusions – Rapid maxillary expansion distinctly increased mean palatal widths and cross‐sectional areas.
However, palatal height (55–65) and maxillary length decreased to a small extent.
Related Results
Assessment of palatal rugae in a multiethnic population
Assessment of palatal rugae in a multiethnic population
Introduction: Palatogenesis is an important component of facial development that leads to the formation of an intact palate via the fusion of three palatal components—the two later...
Intercenter comparison of slow and rapid maxillary expansion in unilateral complete cleft lip and palate
Intercenter comparison of slow and rapid maxillary expansion in unilateral complete cleft lip and palate
ABSTRACT Objective: The aim of this study was to compare the occlusal changes of rapid maxillary expansion (RME) and slow maxillary expansion (SME) in patients with unilateral com...
Evaluation of dental and skeletal effects of the asymmetric rapid maxillary expansion appliance: A three-dimensional finite element study
Evaluation of dental and skeletal effects of the asymmetric rapid maxillary expansion appliance: A three-dimensional finite element study
BACKGROUND: Transverse maxillary deficiency is one of the most common skeletal anomalies. The incidence of posterior crossbite caused by maxillary deficiency is between 2.7% and 23...
Microimplant Assisted Rapid Palatal Expansion: A Comprehensive Review
Microimplant Assisted Rapid Palatal Expansion: A Comprehensive Review
Maxillary transverse deficiency routinely requires expansion of the palate. In prepubertal patients, Rapid Maxillary Expansion (RME) is a reliable treatment modality. However, in s...
Tephra deposits associated with silicic domes and lava flows
Tephra deposits associated with silicic domes and lava flows
Most phases of silicic lava dome growth have some associated explosive activity. Tephra produced during this activity have depositional characteristics, grain sizes, and grain shap...
Changes in hyoid bone position following rapid maxillary expansion in adolescents
Changes in hyoid bone position following rapid maxillary expansion in adolescents
Abstract
Objective:
To examine changes in hyoid to mandibular plane distance (H-MP) and tongue length (TL) between children who had orthodontic treatme...
Moving beyond the rhetoric of responsible management education
Moving beyond the rhetoric of responsible management education
Purpose– Business schools appear to be slow adopters of responsible management education (RME), though the rhetoric of RME is visible throughout the sector. The purpose of this pap...
Analisis Kesiapan Rumah Sakit Rafflesia Dalam Mengimplementasikan Electronic Medical Record (RME) Menggunakan Metode DOQ-IT
Analisis Kesiapan Rumah Sakit Rafflesia Dalam Mengimplementasikan Electronic Medical Record (RME) Menggunakan Metode DOQ-IT
It is important to evaluate readiness. Rafflesia hospital has implemented SIMRS, thus opening up opportunities for information system development through the implementation of RME....

