Javascript must be enabled to continue!
A numerical study of the aerosol behavior in intra-acinar region of a human lung
View through CrossRef
The determination of the particle dynamics in the human acinar airways having millions of alveoli is critical in preventing potential health problems and delivering therapeutic particles effectively to target locations. Despite its complex geometrical structure and complicate wall movements, the advanced calculation simulations can provide valuable results to accurately predict the aerosol deposition in this region. The objective of this study was to numerically investigate the aerosol particle transport and deposition in the intra-acinar region of a human lung for different breathing scenarios (i.e., light, normal, and heavy activities) during multiple breaths. Idealized intra-acinar models utilized in this study consisted of a respiratory bronchial model, an alveolar duct model, and an alveolar sac model. The particles with 5 μm in diameter released from the inlet of the model were tracked until they deposited or escaped from the computational domain. The results showed that due to the rhythmic alveolar wall movement, the flow field was divided into two regions: one is the low-speed alveolar flow and the other is the channel flow. It was found that the chaotic acinar flow irreversibility played a significant role in the aerosol transport in higher generations. During the succeeding breaths, more particles deposited or escaped to the relating acinar generation and reached the more distal regions of the lung. The number of particles remaining in the suspension at the end of the third cycle ranged from 0.016% to 3%. When the mouth flow rate increased, the number of particles remaining in the suspension reduced, resulting in higher deposition efficiency. The total deposition efficiencies for each flow rate were 24%, 47%, and 77%, respectively. The particle simulation results also showed that more breathing cycle was required for full aerosol particle deposition or escape from the model. In addition to the alveolar wall motion, the type of breathing condition and breathing cycle had a significant effect on the accurate prediction of the aerosol deposition in the intra-acinar region of the human lung.
Title: A numerical study of the aerosol behavior in intra-acinar region of a human
lung
Description:
The determination of the particle dynamics in the human acinar airways having millions of alveoli is critical in preventing potential health problems and delivering therapeutic particles effectively to target locations.
Despite its complex geometrical structure and complicate wall movements, the advanced calculation simulations can provide valuable results to accurately predict the aerosol deposition in this region.
The objective of this study was to numerically investigate the aerosol particle transport and deposition in the intra-acinar region of a human lung for different breathing scenarios (i.
e.
, light, normal, and heavy activities) during multiple breaths.
Idealized intra-acinar models utilized in this study consisted of a respiratory bronchial model, an alveolar duct model, and an alveolar sac model.
The particles with 5 μm in diameter released from the inlet of the model were tracked until they deposited or escaped from the computational domain.
The results showed that due to the rhythmic alveolar wall movement, the flow field was divided into two regions: one is the low-speed alveolar flow and the other is the channel flow.
It was found that the chaotic acinar flow irreversibility played a significant role in the aerosol transport in higher generations.
During the succeeding breaths, more particles deposited or escaped to the relating acinar generation and reached the more distal regions of the lung.
The number of particles remaining in the suspension at the end of the third cycle ranged from 0.
016% to 3%.
When the mouth flow rate increased, the number of particles remaining in the suspension reduced, resulting in higher deposition efficiency.
The total deposition efficiencies for each flow rate were 24%, 47%, and 77%, respectively.
The particle simulation results also showed that more breathing cycle was required for full aerosol particle deposition or escape from the model.
In addition to the alveolar wall motion, the type of breathing condition and breathing cycle had a significant effect on the accurate prediction of the aerosol deposition in the intra-acinar region of the human lung.
Related Results
Abstract B022: Acinar-to-ductal metaplasia index (ADMI): A quantifiable measure of ADM
Abstract B022: Acinar-to-ductal metaplasia index (ADMI): A quantifiable measure of ADM
Abstract
Acinar to ductal metaplasia (ADM) is thought to be a natural adaptive response to injury by which downregulation of digestive enzymes mitigates tissue damag...
Experimental studies on cloud condensation nuclei activation and cloud microphysical properties
Experimental studies on cloud condensation nuclei activation and cloud microphysical properties
Atmospheric aerosol particles have the ability to affect climate through cloud interactions and direct scattering and absorption of radiation. These aerosol particles can also affe...
Abstract C079: Exploring acinar to ductal metaplasia in pancreatitis and precancerous contexts using FixNCut
Abstract C079: Exploring acinar to ductal metaplasia in pancreatitis and precancerous contexts using FixNCut
Abstract
Acinar to ductal metaplasia (ADM) is the process by which acinar cells transition to a duct-like state acquiring ductal markers and morphology. This process...
Decadal Characterization of Satellite-based Aerosol Types Over Arabian Peninsula: Comprehensive Insight and General Performance
Decadal Characterization of Satellite-based Aerosol Types Over Arabian Peninsula: Comprehensive Insight and General Performance
Retrieving aerosol characteristics such as particle size, shape, and absorption properties is a big challenge in satellite-based remote sensing, mainly for the single-viewing-angle...
Effects of physical and chemical nonlinearities on evolution of optical properties of biomass burning aerosol
Effects of physical and chemical nonlinearities on evolution of optical properties of biomass burning aerosol
<p>Aerosol from open biomass burning (BB) is known to strongly impact the Earth radiation budget. Therefore, a good knowledge of its optical properties and their evol...
Aerosol optical and radiative properties over Asia: Ground-based AERONET observations
Aerosol optical and radiative properties over Asia: Ground-based AERONET observations
Aerosols continue to contribute the largest uncertainty in quantifying Earth’s climate change. The uncertainty associated with aerosol radiative forcing is found to be hi...
A holistic aerosol model for Uranus and Neptune, including Dark Spots
A holistic aerosol model for Uranus and Neptune, including Dark Spots
<p>Previous studies of the reflectance spectra of Uranus and Neptune concentrated on individual, narrow wavelength regions, inferring solutions for the vertical struc...
Aerosol deposition in the human lung: Effect of high-frequency oscillation on the deposition characteristics of an inhaled nebulized aerosol
Aerosol deposition in the human lung: Effect of high-frequency oscillation on the deposition characteristics of an inhaled nebulized aerosol
1. Oral high-frequency oscillation (OHFO) may have important effects on aerosol deposition in the lungs. In order to investigate these, a technique was devised to measure regional ...

