The Influence of Soil Acidity and Alkalinity Conditions on the Leaching Simulation of Metal in Iron Tailings

In order to evaluate the utilization potential and environmental risk of iron tailings in ameliorating soda saline–alkali soil, a leaching experiment of iron tailings was carried out by simulating the soil acid–base environment and the saline–alkali stress environment of soda saline–alkali, and the basic physicochemical properties and the content and leaching characteristics of metal elements of iron tailings were analyzed to evaluate the environmental risk. The results showed that the iron tailings sand had a large specific surface area (0.66~0.91 m2·g−1) and a rich pore structure (pore diameter 9.07~11.48 nm), which was conducive to the adsorption of salt-alkali by iron tailings sand. The main chemical composition of iron tailings is SiO2 (33.39%~57.32%) and Fe2O3 (8.47%~14.94%), the content of plant nutrient elements in iron tailings is abundant, and the content of risk elements is far below the national standard limit. The leaching experiment results indicated that under acid or alkali conditions, the leaching amounts of various metal elements from the iron tailings met the national water quality standards for farmland irrigation, with Cd, Hg, Mn, Al, Ca, and others being more readily leached under acidic conditions. Under the same pH conditions, Cd, Hg, As, Al, and others were more readily leached under the soda saline–alkali environment. Unlike in the soil acid–base environment, the correlations between the leaching amounts of different metals were weaker under the combined soda saline–alkali stress, with only As and Al showing a positive correlation with the pH of the leachate, though the correlation was not significant. This study confirms that the environmental risk of using iron tailings for the improvement of soda saline–alkali soil is relatively low, and long-term changes in the contents of heavy metals such as As and Al in the soil should be given focused attention in future work.