Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach
View through CrossRef
Abstract
The blade deformation caused by aerodynamic and centrifugal loads during operating makes blade configurations different from their stationary shape. Based on the load incremental approach, a novel pre-deformation method for cold blade shape is provided in order to compensate blade deformation under running. Effect of nonlinear blade stiffness is considered by updating stiffness matrix in response to the variation of blade configuration when calculating deformations. The pre-deformation procedure is iterated till a converged cold blade shape is obtained. The proposed pre-deformation method is applied to a transonic compressor rotor. Effect of load conditions on blade pre-deformation is also analyzed. The results show that the pre-deformation method is easy to implement with fast convergence speed. Neither the aerodynamic load nor centrifugal load can be neglected in blade pre-deformation.
Walter de Gruyter GmbH
Title: Pre-Deformation Method for Manufactured Compressor Blade Based on Load Incremental Approach
Description:
Abstract
The blade deformation caused by aerodynamic and centrifugal loads during operating makes blade configurations different from their stationary shape.
Based on the load incremental approach, a novel pre-deformation method for cold blade shape is provided in order to compensate blade deformation under running.
Effect of nonlinear blade stiffness is considered by updating stiffness matrix in response to the variation of blade configuration when calculating deformations.
The pre-deformation procedure is iterated till a converged cold blade shape is obtained.
The proposed pre-deformation method is applied to a transonic compressor rotor.
Effect of load conditions on blade pre-deformation is also analyzed.
The results show that the pre-deformation method is easy to implement with fast convergence speed.
Neither the aerodynamic load nor centrifugal load can be neglected in blade pre-deformation.
Related Results
Sensitivity Analysis of Impeller Blade Parameters to Compressor Performance and Aerodynamic Noise
Sensitivity Analysis of Impeller Blade Parameters to Compressor Performance and Aerodynamic Noise
Abstract
The effects of a series of impeller blade parameters on compressor performance and aerodynamic noise are numerical analyzed in this paper. The inversed impe...
Influence of Tailored Boundary Layer Suction on Aerodynamic Performance in Bowed Compressor Cascades
Influence of Tailored Boundary Layer Suction on Aerodynamic Performance in Bowed Compressor Cascades
The impact of boundary layer suction on the aerodynamic performance of bowed compressor cascades is discussed in this paper. Preliminary studies are conducted in the context of a h...
Approach to Model Thermistor Based AC Compressor Cut-OFF/Cut-IN Phenomenon in 1D Simulation of Mobile Air Conditioning
Approach to Model Thermistor Based AC Compressor Cut-OFF/Cut-IN Phenomenon in 1D Simulation of Mobile Air Conditioning
<div class="section abstract"><div class="htmlview paragraph">This paper documents the approach followed to simulate the physical phenomenon of thermistor based AC comp...
Root Cause Analysis of the Catastrophic Failure of a Propylene Recycle Compressor
Root Cause Analysis of the Catastrophic Failure of a Propylene Recycle Compressor
Abstract
A 2-section, 6-stage propylene recycle compressor experienced a catastrophic failure that resulted in extensive damage to its internals. The compressor was ...
Compressor Piping Design Effect on Vibration Data
Compressor Piping Design Effect on Vibration Data
One of the systems for oil and gas production supports is the nitrogen compression system. Problem found that condition of the compressor has high vibration with the maximum overal...
An Introductory and Analysis of the Stationary Blade Rotary Compressor
An Introductory and Analysis of the Stationary Blade Rotary Compressor
A new type of stationary blade rotary compressor is developed to overcome the rolling piston compressor’s weaknesses such as severe leaking loss and friction waste. The new compres...
Achieving the Three Dimensions of Mixed Refrigerant Compressor Efficiency
Achieving the Three Dimensions of Mixed Refrigerant Compressor Efficiency
Abstract
Investors in small-scale LNG (SSLNG) face the grave challenge of achieving cost efficiency, operational efficiency, and energy efficiency in the equipment t...
Discrete element parameter calibration and wear characteristics analysis of soil-rotary tillage blade in gneiss mountainous area
Discrete element parameter calibration and wear characteristics analysis of soil-rotary tillage blade in gneiss mountainous area
Abstract
Aiming at the problems of fast wear and short service life of rotary tillage blade in gneiss mountainous area, and the lack of accurate and reliable discrete eleme...