HT Stimulation Fluid Based On GLDA Meets Productivity, Environmental Need

Technology Update Industry operations are shifting toward high-temperature (HT) downhole set-tings, expensive tubular metallurgy, and extended reach wells, while health, safety, and environmental requirements become stricter. Consequently, conventional stimulation treatments, such as applications using hydrochloric acid-based fluids, will no longer meet the industry’s needs as operational environments evolve. A new stimulation fluid developed by AkzoNobel, Dissolvine StimWell, is based on glutamic acid diacetic acid (GLDA) and has been successfully applied in the field. GLDA has high thermal stability and low corrosion potential, and is an effective stimulation fluid without adverse environmental impact. A vertical gas well in a deep, sour carbonate reservoir was successfully stimulated using GLDA. Previous matrix stimulation treatments with conventional acids in this HT gas well did not sustain the performance, and a fracture treatment was considered for the well. However, the case proved that matrix acidizing with the GLDA-based fluid was the best stimulation method for the well in terms of cost-effectiveness and regulatory issues. Stimulation Purpose The object of stimulation is to remove the production zone damage caused by the drilling and completion processes in sandstone reservoirs, and to create channels or wormholes in carbonate reservoirs. Although an industry workhorse for decades, hydrochloric acid (HCl) often produces subpar stimulation results, especially at high temperatures, because of its fast reaction near the wellbore, low acid penetration, and high corrosivity. Many problems may occur during sandstone acidizing with HCl/hydrofluoric mud acid, such as decomposition of clays in HCl acids, precipitation caused by the presence of fluoride, silica gel filming, and colloidal silica gel precipitation. As a result, mud acid may cause significant damage to sandstone reservoirs, especially for those with a high content of calcite or clays such as illite. The desirable alternative stimulation fluid would be suitable for all of these conditions, be globally applicable, and have an acceptable environmental profile. Fluids based on GLDA meet those requirements. The fluids are effective in improving permeability in carbonate and sandstone formations. Many additives such as iron control agents that are required in other fluids are not needed in GLDA-based stimulation fluids.