Javascript must be enabled to continue!
Modeling the Oil Viscosity of Nigerian Crudes Using Machine Learning
View through CrossRef
Abstract
Oil viscosity is an important parameter for estimating the flow behavior of crude oil under varying pressure and temperature regimes encountered in the subsurface and surface components of the petroleum production system. Although experimental data provides the most accurate characterization of this property, obtaining such data in the laboratory is often time-consuming and expensive. Alternatively, one of several empirical correlations can be used, albeit with often poor generalization to samples from differing thermodynamic systems or crude oil types.
In this paper, we use a data-driven approach based on machine learning (ML) algorithms to create high-performing models for predicting the dead oil and bubblepoint oil viscosity of Nigerian crudes. Random Forest (RF) and Gradient Boosting (GB) ensembles, as well as Multi-Layer Perceptron (MLP) and Radial Basis Function (RBF) networks, are compared to several widely used correlations, and their performance is evaluated on a large dataset of crude oil samples collected from various Niger Delta oil fields. The ML models are built with minimal and easily accessible input parameters shared by the correlations, allowing for an objective assessment of their superiority to these correlations given the same input framework. These are reservoir temperature and oil API gravity for the dead oil viscosity modeling, and the solution gas-oil ratio and dead oil viscosity for the bubblepoint oil viscosity modeling. Furthermore, the model's reliability is tested by partitioning the dataset into training, validating, and testing sets, and optimal model configurations are achieved through Bayesian Optimization.
On the dead oil viscosity modeling task, we achieve a modest improvement over the best-performing correlation developed by Al-Khafaji (1987). The RF model's R2 and mean absolute error (MAE) scores on the testing data are 0.831 and 3.423, respectively, versus 0.809 and 4.439 for the correlation method. However, for the bubblepoint oil viscosity modeling, the improvement recorded using the RF model over the best-performing correlation developed by Beggs and Robinson (1975) is remarkable. In this case, the R2 and MAE scores for the RF model are 0.924 and 0.441, respectively, compared to 0.574 and 0.813 for the correlation method. As a result, our ML models have outperformed conventional correlations for modeling oil viscosity.
Ultimately, oil viscosity estimates from the developed ML models can provide a much more accurate characterization of the fluid behavior of Niger Delta crudes than the conventional correlations can. Furthermore, the ML models allow for continuous improvement of their generalization ability by introducing new data from various sources to the models.
Title: Modeling the Oil Viscosity of Nigerian Crudes Using Machine Learning
Description:
Abstract
Oil viscosity is an important parameter for estimating the flow behavior of crude oil under varying pressure and temperature regimes encountered in the subsurface and surface components of the petroleum production system.
Although experimental data provides the most accurate characterization of this property, obtaining such data in the laboratory is often time-consuming and expensive.
Alternatively, one of several empirical correlations can be used, albeit with often poor generalization to samples from differing thermodynamic systems or crude oil types.
In this paper, we use a data-driven approach based on machine learning (ML) algorithms to create high-performing models for predicting the dead oil and bubblepoint oil viscosity of Nigerian crudes.
Random Forest (RF) and Gradient Boosting (GB) ensembles, as well as Multi-Layer Perceptron (MLP) and Radial Basis Function (RBF) networks, are compared to several widely used correlations, and their performance is evaluated on a large dataset of crude oil samples collected from various Niger Delta oil fields.
The ML models are built with minimal and easily accessible input parameters shared by the correlations, allowing for an objective assessment of their superiority to these correlations given the same input framework.
These are reservoir temperature and oil API gravity for the dead oil viscosity modeling, and the solution gas-oil ratio and dead oil viscosity for the bubblepoint oil viscosity modeling.
Furthermore, the model's reliability is tested by partitioning the dataset into training, validating, and testing sets, and optimal model configurations are achieved through Bayesian Optimization.
On the dead oil viscosity modeling task, we achieve a modest improvement over the best-performing correlation developed by Al-Khafaji (1987).
The RF model's R2 and mean absolute error (MAE) scores on the testing data are 0.
831 and 3.
423, respectively, versus 0.
809 and 4.
439 for the correlation method.
However, for the bubblepoint oil viscosity modeling, the improvement recorded using the RF model over the best-performing correlation developed by Beggs and Robinson (1975) is remarkable.
In this case, the R2 and MAE scores for the RF model are 0.
924 and 0.
441, respectively, compared to 0.
574 and 0.
813 for the correlation method.
As a result, our ML models have outperformed conventional correlations for modeling oil viscosity.
Ultimately, oil viscosity estimates from the developed ML models can provide a much more accurate characterization of the fluid behavior of Niger Delta crudes than the conventional correlations can.
Furthermore, the ML models allow for continuous improvement of their generalization ability by introducing new data from various sources to the models.
Related Results
Paraffin Characteristics of Waxy Crude Oils in China and the Methods of Paraffin Removal and Inhibition
Paraffin Characteristics of Waxy Crude Oils in China and the Methods of Paraffin Removal and Inhibition
ABSTRACT
The crude oil in which the wax content is more than 10% (w), nearly accounts for 90 percent of the total output of crudes in China. On the whole, for the...
New Compositional Models for Calculating Viscosity of Crude Oils
New Compositional Models for Calculating Viscosity of Crude Oils
Abstract
Crude oil viscosity is an important physical property that controls and influences the flow of oil through porous media and pipelines. Hence, it is the b...
Correlation Between Oil Composition and Paraffin Inhibitors Activity
Correlation Between Oil Composition and Paraffin Inhibitors Activity
Abstract
Highly paraffinic crudes were characterized by means of physico-chemical analysis (pour point, cloud point and API gravity) and hydrocarbon analysis (wax...
Crude Oil Characterization For Micellar Enhanced Oil Recovery
Crude Oil Characterization For Micellar Enhanced Oil Recovery
Abstract
Chemically enhanced oil recovery depends on the phase and interfacial properties of the crude phase and interfacial properties of the crude Oil-brine-sur...
Depth-Related Oil Viscosity Variation In Canadian Heavy Oil Reservoirs
Depth-Related Oil Viscosity Variation In Canadian Heavy Oil Reservoirs
Abstract
The natural variability of oil viscosity in the Clearwater B heavy oil formation in east central Alberta has been examined. Oil samples taken from preser...
Safe Processing of Naphthenic Acid Opportunity Crudes Using Chemical Inhibition and Online Monitoring
Safe Processing of Naphthenic Acid Opportunity Crudes Using Chemical Inhibition and Online Monitoring
Abstract
Continuing economic pressures on the refining industry are forcing more refiners to evaluate the possibilities of processing lower priced, opportunity crude...
Selection of Injectable Drug Product Composition using Machine Learning Models (Preprint)
Selection of Injectable Drug Product Composition using Machine Learning Models (Preprint)
BACKGROUND
As of July 2020, a Web of Science search of “machine learning (ML)” nested within the search of “pharmacokinetics or pharmacodynamics” yielded over 100...
Introducing the Vibrating Wire Viscometer for Wireline Formation Testing: In-Situ Viscosity
Introducing the Vibrating Wire Viscometer for Wireline Formation Testing: In-Situ Viscosity
Abstract
A vibrating wire (VW) viscometer is introduced for the in-situ measurement of formation fluid viscosity. This is the first time this simple and robust techn...

