Javascript must be enabled to continue!
Stress Analysis on Projectiles Colliding into Sand
View through CrossRef
In a cannonball firing test, inactive cannonballs are fired to an impact area of a medium such as sand. Collision, penetration, impulse damping and fracture are investigated. For an efficient construction and utilization, researches on media for an impact area are necessary. In this study, the collision and penetration of cannonballs into sand is analyzed. It is found that density of a medium is an important factor.
Trans Tech Publications, Ltd.
Title: Stress Analysis on Projectiles Colliding into Sand
Description:
In a cannonball firing test, inactive cannonballs are fired to an impact area of a medium such as sand.
Collision, penetration, impulse damping and fracture are investigated.
For an efficient construction and utilization, researches on media for an impact area are necessary.
In this study, the collision and penetration of cannonballs into sand is analyzed.
It is found that density of a medium is an important factor.
Related Results
Sand Production Management
Sand Production Management
Abstract
Sand production may be inevitable in many fields that have a relatively lower formation strength. Sand erosion and settling predictions and sand monitori...
The Effect of Dry Density on Shear Strength Parameters of Ravi, Chenab and Lawrencepur Sand in Dry and Saturated Conditions
The Effect of Dry Density on Shear Strength Parameters of Ravi, Chenab and Lawrencepur Sand in Dry and Saturated Conditions
Soil is the soul material for any civil engineering structure. In general, there are two types of soil; cohesive soil and silty sand. Silty sand is mineral soil that exhibits granu...
Evaluating the Sand-Trapping Efficiency of Sand Fences Using a Combination of Wind-Blown Sand Measurements and UAV Photogrammetry at Tottori Sand Dunes, Japan
Evaluating the Sand-Trapping Efficiency of Sand Fences Using a Combination of Wind-Blown Sand Measurements and UAV Photogrammetry at Tottori Sand Dunes, Japan
Fences are commonly used in coastal regions to control wind-blown sand. Sand-trapping fences and sand-stabilizing fences have been installed at the Tottori Sand Dunes, Tottori Pref...
A Sand Failure Test Can Cut Both Completion Costs And The Number Of Developement Wells
A Sand Failure Test Can Cut Both Completion Costs And The Number Of Developement Wells
Abstract
The objective of this Sand Failure Test was to determine whether initial sand control is necessary on a poorly consolidated gas field, or whether it can ...
Gravel Placement Through Perforations and Perforation Cleaning for Gravel Packing
Gravel Placement Through Perforations and Perforation Cleaning for Gravel Packing
Gravel Placement Through Perforations and Perforation Cleaning Perforations and Perforation Cleaning for Gravel Packing
Summary.
...
A STUDY ON BALLISTIC BEHAVIOR OF UHMWPE-FIBRE REINFORCED COMPOSITE ARMOR AGAINST DEFORMABLE PROJECTILES
A STUDY ON BALLISTIC BEHAVIOR OF UHMWPE-FIBRE REINFORCED COMPOSITE ARMOR AGAINST DEFORMABLE PROJECTILES
UHMWPE-fiber reinforced composites (UFRC) are exceptionally lightweight and are generally used to defeat 7.62 mm projectiles under high-velocity impact. The UFRC, upon impact, unde...
Sand Monitoring in Gas Wells: Enhanced Methodology of Sand Sampling via Combination of Online Sand Sampler and Acoustic Sand Monitors to Determine Max Sand Free Rates for Identification of Quick Gain Opportunities and to Quantify Sand Production
Sand Monitoring in Gas Wells: Enhanced Methodology of Sand Sampling via Combination of Online Sand Sampler and Acoustic Sand Monitors to Determine Max Sand Free Rates for Identification of Quick Gain Opportunities and to Quantify Sand Production
Abstract
Sand production from wells are one of the operators’ biggest nightmare as the cascading effect can cause some major harm to the surface equipment as well as...
Optimizing Usari Field Production Through Effective Sand Management
Optimizing Usari Field Production Through Effective Sand Management
Abstract
Usari field is known for its sand production history. The first sand production incident occurred in 2001 when a choke had a pin-hole leak resulting from sa...

