Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Acidic Gas Determination Using Indium Tin Oxide-Based Gas Sensors
View through CrossRef
This work has presented gas sensors based on indium tin oxide (ITO) for the detection of SO2 and NO2. The ITO gas-sensing material was deposited by radio frequency (RF) magnetron sputtering. The properties of gas sensing could be improved by increasing the ratio of SnO2. The response characteristics of the gas sensor for detecting different concentrations of NO2 and SO2 were investigated. In the detection of NO2, the sensitivity was significantly improved by increasing the SnO2 ratio in ITO by 5%, and the response and recovery time were reduced significantly. However, the sensitivity of the sensor decreased with increasing SO2 concentration. From X-ray photoelectron spectroscopy (XPS) analysis, the gas-sensitive response mechanisms were different in the atmosphere of NO2 and SO2. The NO2 was adsorbed by ITO via physisorption but the SO2 had a chemical reaction with the ITO surface. The gas selectivity, temperature dependence, and environmental humidity of ITO-based gas sensors were systematically analyzed. The high detection sensitivity for acidic gas of the prepared sensor presented great potential for acid rain monitoring.
Title: Acidic Gas Determination Using Indium Tin Oxide-Based Gas Sensors
Description:
This work has presented gas sensors based on indium tin oxide (ITO) for the detection of SO2 and NO2.
The ITO gas-sensing material was deposited by radio frequency (RF) magnetron sputtering.
The properties of gas sensing could be improved by increasing the ratio of SnO2.
The response characteristics of the gas sensor for detecting different concentrations of NO2 and SO2 were investigated.
In the detection of NO2, the sensitivity was significantly improved by increasing the SnO2 ratio in ITO by 5%, and the response and recovery time were reduced significantly.
However, the sensitivity of the sensor decreased with increasing SO2 concentration.
From X-ray photoelectron spectroscopy (XPS) analysis, the gas-sensitive response mechanisms were different in the atmosphere of NO2 and SO2.
The NO2 was adsorbed by ITO via physisorption but the SO2 had a chemical reaction with the ITO surface.
The gas selectivity, temperature dependence, and environmental humidity of ITO-based gas sensors were systematically analyzed.
The high detection sensitivity for acidic gas of the prepared sensor presented great potential for acid rain monitoring.
Related Results
Investigation of Indium Oxide Effect on Indium Particles Properties Used as Silicon Nanowires Catalyst
Investigation of Indium Oxide Effect on Indium Particles Properties Used as Silicon Nanowires Catalyst
In this chapter, we investigate on indium particles elaboration by different annealing processes: rapid thermal annealing (RTA) and conventional processes. The elaborated particles...
Preparation and thermochromic behaviors of polydiacetylene/indium or gallium doped zinc oxide nanocomposites
Preparation and thermochromic behaviors of polydiacetylene/indium or gallium doped zinc oxide nanocomposites
Abstract
Polydiacetylene (PDA) is one of the well-known thermochromic materials having a high potential in applications such as displays and sensor technology. Many ...
Polycrystalline indium phosphide on silicon using a simple chemical route
Polycrystalline indium phosphide on silicon using a simple chemical route
We describe a simple, aqueous and low thermal budget process for deposition of polycrystalline indium phosphide on silicon substrate. Using stoichiometric indium oxide films prepar...
Sensor Gas Amonia Berbasis Polimer Konduktif Polianilina: Sebuah Review
Sensor Gas Amonia Berbasis Polimer Konduktif Polianilina: Sebuah Review
Artikel review ini memberikan informasi tentang aplikasi polianilina (PANI) dan kompositnya sebagai sensor gas berbahaya khususnya amonia (NH3). Kajian yang dibahas pada artikel in...
Metallography and Microstructures of Tin and Tin Alloys
Metallography and Microstructures of Tin and Tin Alloys
Abstract
This article describes the specimen preparation steps for tin and tin alloys, and for harder base metals which are coated with these materials with illustra...
Biomonitorization of Concentrations of 28 Elements in Serum and Urine among Workers Exposed to Indium Compounds v1
Biomonitorization of Concentrations of 28 Elements in Serum and Urine among Workers Exposed to Indium Compounds v1
Many studies have documented the abnormal concentrations of metals/metalloids in serum or urine of occupational workers, but no works systematically analysed the concentrations of ...
A Preliminary Review of Metallogenic Regularity of Tin Deposits in China
A Preliminary Review of Metallogenic Regularity of Tin Deposits in China
China is rich in tin resources, and contains many types of tin deposits. Among the tin deposit types, the cassiterite‐sulfide type, skarn type and quartz vein type occupy a large p...
Fabrication of Indium-Tin Alloy and Oxide Nanowires Using Extrusion Molding Process in the Air
Fabrication of Indium-Tin Alloy and Oxide Nanowires Using Extrusion Molding Process in the Air
A simple method to indium tin alloy and oxide nanowires were achieved by using the extrusion molding process in the air. Eutectic indium tin bulk were firstly injected into AAO tem...