Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
FEASIBILITY ANALYSIS OF 2D-SLAM USING COMBINATION OF KINECT AND LASER SCANNER
View through CrossRef
Both laser scanner and Kinect has been widely used in robotic application for simultaneous localization and mapping (SLAM). However, each sensor has its own limitations. For example, Kinect does not have a wide range field of view and laser scanner could not detect obstacles beyond its scanning plane. The paper proposes a method to combine the data from Kinect and laser scanner to perform a 2D-SLAM. The sensors will be mounted in different types of configurations; both facing forward and facing in opposite directions. This system is able to detect complex surrounding features for better mapping and obstacle avoidance.
Title: FEASIBILITY ANALYSIS OF 2D-SLAM USING COMBINATION OF KINECT AND LASER SCANNER
Description:
Both laser scanner and Kinect has been widely used in robotic application for simultaneous localization and mapping (SLAM).
However, each sensor has its own limitations.
For example, Kinect does not have a wide range field of view and laser scanner could not detect obstacles beyond its scanning plane.
The paper proposes a method to combine the data from Kinect and laser scanner to perform a 2D-SLAM.
The sensors will be mounted in different types of configurations; both facing forward and facing in opposite directions.
This system is able to detect complex surrounding features for better mapping and obstacle avoidance.
Related Results
Performance Analysis of the Microsoft Kinect Sensor for 2D Simultaneous Localization and Mapping (SLAM) Techniques
Performance Analysis of the Microsoft Kinect Sensor for 2D Simultaneous Localization and Mapping (SLAM) Techniques
This paper presents a performance analysis of two open-source, laser scanner-based Simultaneous Localization and Mapping (SLAM) techniques (i.e., Gmapping and Hector SLAM) using a...
Information metrics for localization and mapping
Information metrics for localization and mapping
Decades of research have made possible the existence of several autonomous systems that successfully and efficiently navigate within a variety of environments under certain conditi...
Use of the Azure Kinect to measure foot clearance during obstacle crossing
Use of the Azure Kinect to measure foot clearance during obstacle crossing
AbstractObstacle crossing is a typical adaptive locomotion known to be related to the risk of falls. Previous conventional studies have used elaborate and costly optical motion cap...
GNV2-SLAM: vision SLAM system for cowshed inspection robots
GNV2-SLAM: vision SLAM system for cowshed inspection robots
Simultaneous Localization and Mapping (SLAM) has emerged as one of the foundational technologies enabling mobile robots to achieve autonomous navigation, garnering significant atte...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Management of Lower Limb Varicose Veins Using Endovenous Laser Ablation, Micro-Phlebectomy, and Sclerotherapy Using Multimodal Analgesia
Management of Lower Limb Varicose Veins Using Endovenous Laser Ablation, Micro-Phlebectomy, and Sclerotherapy Using Multimodal Analgesia
Abstract
Introduction
Previously, the conventional surgical procedure of high-ligation and saphenous stripping was commonly used to treat varicose veins (VVs). However, contemporar...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...