Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Research on low‐cycle fatigue behavior of Ni‐based single crystal superalloy with shaped film cooling holes at high temperature
View through CrossRef
AbstractFilm cooling holes (FCHs) geometric structure significantly affects low‐cycle fatigue (LCF) of the single crystal turbine blade. This study investigates the LCF behavior of Ni‐based single crystal plate specimens with two different structure FCHs, including elliptical and fan‐shaped FCHs, by high temperature fatigue tests and crystal plasticity simulation. The results show that the LCF life of the fan‐shaped FCHs is shorter than those of the elliptical FCHs. The fracture characteristics and microstructure evolution of different structure FCHs are dissimilar. Oxidation affects the fatigue crack nucleation process at the FCH edge. The resolved shear stress (RSS) around fan‐shaped FCHs is greater than elliptical FCHs under one cyclic stress, and the area with larger RSS is consistent with fatigue crack nucleation position. The early LCF failure is mainly attributed to the high temperature oxidation of the local slip deformation induced by RSS concentration around the FCHs.
Title: Research on low‐cycle fatigue behavior of Ni‐based single crystal superalloy with shaped film cooling holes at high temperature
Description:
AbstractFilm cooling holes (FCHs) geometric structure significantly affects low‐cycle fatigue (LCF) of the single crystal turbine blade.
This study investigates the LCF behavior of Ni‐based single crystal plate specimens with two different structure FCHs, including elliptical and fan‐shaped FCHs, by high temperature fatigue tests and crystal plasticity simulation.
The results show that the LCF life of the fan‐shaped FCHs is shorter than those of the elliptical FCHs.
The fracture characteristics and microstructure evolution of different structure FCHs are dissimilar.
Oxidation affects the fatigue crack nucleation process at the FCH edge.
The resolved shear stress (RSS) around fan‐shaped FCHs is greater than elliptical FCHs under one cyclic stress, and the area with larger RSS is consistent with fatigue crack nucleation position.
The early LCF failure is mainly attributed to the high temperature oxidation of the local slip deformation induced by RSS concentration around the FCHs.
Related Results
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Enhancement of Film Cooling Effectiveness Using Dean Vortices
Abstract
Film cooling technology is widely used in gas turbines. Improvement of gas turbine thermal efficiency, specific power and specific thrust can be achieved by...
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
It was always based on a teenage love story between the two kids. One is a sniffer and one is not. It was designed for Central Australia because we do write these kids off there. N...
Numerical Analysis of Film Cooling Performance of Micro Holes and Compound Angle Sister Holes
Numerical Analysis of Film Cooling Performance of Micro Holes and Compound Angle Sister Holes
In the present research, micro holes and compound angle sister holes have been numerically investigated as two different techniques to enhance the cylindrical hole cooling performa...
Numerical Analysis of Film Cooling Performance of Micro Holes and Compound Angle Sister Holes
Numerical Analysis of Film Cooling Performance of Micro Holes and Compound Angle Sister Holes
In the present research, micro holes and compound angle sister holes have been numerically investigated as two different techniques to enhance the cylindrical hole cooling performa...
Assessment of Objective and Subjective Fatigubility in Obese
Assessment of Objective and Subjective Fatigubility in Obese
Aim: This study aimed to quantify objective fatigue using the Long Distance Corridor Walk (2-Minute Walk Test and 400-Meter Walk Test) and evaluate subjective fatigue using the Fat...
Topographic analysis of holes drilled by pulsed Nd:YAG laser on DD6 single-crystal superalloy
Topographic analysis of holes drilled by pulsed Nd:YAG laser on DD6 single-crystal superalloy
Industrial applications of laser drilling include the production of cooling holes at vertical and acute angles in certain parts of the aero-engine components. Single-crystal nickel...
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
Combustor Effusion Cooling Multiparameter Aerothermal Numerical Analysis
Combustor Effusion Cooling Multiparameter Aerothermal Numerical Analysis
The solid temperature prediction is one of the most widespread type of modelization used in the industry. One reading this study might wonder why there would be readymade solutions...