Javascript must be enabled to continue!
Mid-infrared silicon photonic lasers based on GeSn slab waveguide on silicon
View through CrossRef
GeSn alloy has emerged as an attractive active material for Si-based mid-infrared (MIR) lasers due to its direct bandgap nature at higher Sn concentrations. Here, we report on an optically-pumped GeSn MIR lasers based on planar slab waveguide with a top Si ridge structure. The inclusion of 10% Sn transforms the GeSn active layer into a direct bandgap material. The Si ridge structure ensures appropriate optical confinements with reduced scattering loss from the waveguide sidewall. Lasing action was achieved under optical pumping with a low threshold of 60.85 kW/cm
2
and an emission wavelength of 2238 nm at
T
= 40 K. Lasing action was also observed up to
T
= 90 K with a threshold of 170 kW/cm
2
.
Optica Publishing Group
Title: Mid-infrared silicon photonic lasers based on GeSn slab waveguide on silicon
Description:
GeSn alloy has emerged as an attractive active material for Si-based mid-infrared (MIR) lasers due to its direct bandgap nature at higher Sn concentrations.
Here, we report on an optically-pumped GeSn MIR lasers based on planar slab waveguide with a top Si ridge structure.
The inclusion of 10% Sn transforms the GeSn active layer into a direct bandgap material.
The Si ridge structure ensures appropriate optical confinements with reduced scattering loss from the waveguide sidewall.
Lasing action was achieved under optical pumping with a low threshold of 60.
85 kW/cm
2
and an emission wavelength of 2238 nm at
T
= 40 K.
Lasing action was also observed up to
T
= 90 K with a threshold of 170 kW/cm
2
.
Related Results
Franz-Keldysh Effect in GeSn Detectors
Franz-Keldysh Effect in GeSn Detectors
The fundament for silicon based photonics is Ge grown on Si and SOI. A simple photonic integrated circuit (PIC) consist of an integrated light source, a waveguide, a modulator and ...
Ultrafast laser sources and frequency conversion at high repetition rates
Ultrafast laser sources and frequency conversion at high repetition rates
Mode-locked laser sources have become a cornerstone technology for numerous applications and led to the development of groundbreaking optical tools and systems. In the optical freq...
Lasing up to T = 339 K in Subwavelength Nanowire-Induced Photonic Crystal Nanocavities
Lasing up to T = 339 K in Subwavelength Nanowire-Induced Photonic Crystal Nanocavities
We report on lasing operation up to 339K in nanocavities constituted of subwavelength ZnO nanowires integrated in SiN photonic crystals. With thresholds as low as 4MW.cm-2, the inv...
Two-dimensional function photonic crystal
Two-dimensional function photonic crystal
Photonic crystal is a kind of periodic optical nanostructure consisting of two or more materials with different dielectric constants, which has attracted great deal of attention be...
Seismic Response Optimization of RC Slabs: Influence of Opening Location, Size, and Geometry on Structural Performance
Seismic Response Optimization of RC Slabs: Influence of Opening Location, Size, and Geometry on Structural Performance
In this research, the influence of the location, area and shape of the openings on the seismic behavior and performance of the concrete slab roof was evaluated and studied using th...
Dynamical behavior of delay-coupled semiconductor lasers
Dynamical behavior of delay-coupled semiconductor lasers
In this Thesis we have presented the results of a set of experimental investigations of the dynamics of delay-coupled semiconductor lasers. The characterization of these systems in...
Kinematics and flow patterns in deep mantle and upper mantle subduction models: Influence of the mantle depth and slab to mantle viscosity ratio
Kinematics and flow patterns in deep mantle and upper mantle subduction models: Influence of the mantle depth and slab to mantle viscosity ratio
Three‐dimensional fluid dynamic laboratory simulations are presented that investigate the subduction process in two mantle models, an upper mantle model and a deep mantle model, an...
Detached Tonga slab in the mantle transition zone imaged by stress variations of deep-focus earthquakes
Detached Tonga slab in the mantle transition zone imaged by stress variations of deep-focus earthquakes
Tonga is a part of Tonga-Kermadec, the 2,550 km long subduction system in SW Pacific. It represents a convergent plate boundary and the outcome of the Pacific plate submerging unde...

