Javascript must be enabled to continue!
Synergistic Effect of Saponin and Rhamnolipid Biosurfactants Systems on Foam Behavior
View through CrossRef
AbstractIn this study, the synergistic effect of saponin and rhamnolipid biosurfactant on foam properties at an air-water interface was investigated. In order to reach the optimum hydrophilic lipophilic balance (HLB) value, samples of 2 wt% of rhamnolipid and saponin biosurfactants with different HLB values (9.6, 10, 10.4, 10.8, 11.2, 11.6, and 12) in 5 ml of DI water were prepared. Results showed that the optimum HLB value of the microemulsion system was 10.8 for the mixture of 84% rhamnolipid and 16% saponin. At that optimum HLB value and a total surfactant concentration of 2 wt%, the maximum foaming ability and foam stability of the mixed system was 48 mm and 72 min respectively. During the experiment, it was observed that at optimum HLB value the foaming ability of the system increased by increasing the concentration of rhamnolipid and saponin. Comparing the foaming ability and foam stability of biosurfactant system with the properties of SDS, Tween80 and Span80 showed that the biosurfactants have a good foaming ability. The CMC value of the biosurfactant mixtures at the optimum HLB value was lower than that of other synthetic surfactants. The results show that, the biosurfactant mixtures had a synergistic effect on foaming ability and foam stability compared to the individual biosurfactants and synthetic surfactants. Therefore, the mixture of rhamnolipid and saponin is proposed as a potential alternative for detergent, cosmetic and petroleum industry.
Title: Synergistic Effect of Saponin and Rhamnolipid Biosurfactants Systems on Foam Behavior
Description:
AbstractIn this study, the synergistic effect of saponin and rhamnolipid biosurfactant on foam properties at an air-water interface was investigated.
In order to reach the optimum hydrophilic lipophilic balance (HLB) value, samples of 2 wt% of rhamnolipid and saponin biosurfactants with different HLB values (9.
6, 10, 10.
4, 10.
8, 11.
2, 11.
6, and 12) in 5 ml of DI water were prepared.
Results showed that the optimum HLB value of the microemulsion system was 10.
8 for the mixture of 84% rhamnolipid and 16% saponin.
At that optimum HLB value and a total surfactant concentration of 2 wt%, the maximum foaming ability and foam stability of the mixed system was 48 mm and 72 min respectively.
During the experiment, it was observed that at optimum HLB value the foaming ability of the system increased by increasing the concentration of rhamnolipid and saponin.
Comparing the foaming ability and foam stability of biosurfactant system with the properties of SDS, Tween80 and Span80 showed that the biosurfactants have a good foaming ability.
The CMC value of the biosurfactant mixtures at the optimum HLB value was lower than that of other synthetic surfactants.
The results show that, the biosurfactant mixtures had a synergistic effect on foaming ability and foam stability compared to the individual biosurfactants and synthetic surfactants.
Therefore, the mixture of rhamnolipid and saponin is proposed as a potential alternative for detergent, cosmetic and petroleum industry.
Related Results
Isolation And Characterization Of Biosurfactant Producing Bacteria From Different Environmental Soil Samples
Isolation And Characterization Of Biosurfactant Producing Bacteria From Different Environmental Soil Samples
Biosurfactants are natural substances produced by several bacterial and fungal organisms that are amphiphilic and are extracellular (a part of the cell membrane). Biosurfactants ca...
Lab Evaluation of Long-Distance Propagation of CO2 Foam for Deep Mobility Control
Lab Evaluation of Long-Distance Propagation of CO2 Foam for Deep Mobility Control
Abstract
Long-distance foam propagation is crucial and necessary for deep mobility-control applications of foam in geological formations. The long-distance propag...
Foam Injection Test in the Siggins Field, Illinois
Foam Injection Test in the Siggins Field, Illinois
A pilot test in this tired, old field, confirmed the laboratory-derived conclusion that foam can do more than soften a beard or ruin a river. It can decrease the mobility of gas an...
Numerical Simulation of Foam Flooding For Sweep Improvement
Numerical Simulation of Foam Flooding For Sweep Improvement
Abstract
Foams are used for mobility control in Enhanced Oil Recovery operations involving injection of gases or steam. The ability of foams to lower the mobility...
Sorption Behavior of Rhamnolipid Biosurfactant on Peat
Sorption Behavior of Rhamnolipid Biosurfactant on Peat
Surfactants are extensively utilized across agriculture, pharmaceuticals, and environmental remediation due to their ability to modify surface and interfacial properties. In hortic...
Foam Flood in Yates Reservoir for Improving Oil Recovery
Foam Flood in Yates Reservoir for Improving Oil Recovery
Abstract
The Yates reservoir is a major, multibillion-barrel legacy oil reservoir in West Texas discovered in 1926. Oil production mainly comes from the San Andres f...
KARAKTERISASI PRODUKSI RHAMNOLIPID MENGGUNAKAN PENDEKATAN BIOLOGI SINTETIK
KARAKTERISASI PRODUKSI RHAMNOLIPID MENGGUNAKAN PENDEKATAN BIOLOGI SINTETIK
Ketersediaan cadangan minyak mentah yang minim di Indonesia menjadi dasar dari penelitian ini untuk membuat sebuah inovasi baru yang dapat diterapkan dalam teknik enhanced oil reco...
Biosurfactants: Screening, Production and their Applications
Biosurfactants: Screening, Production and their Applications
Biosurfactants are commonly recognised as biologically derived surface
active agents. The most significant microbes have been studied for the production of
glycolipid biosurfactant...

