Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Induction Brazing Diamond Grinding Wheel with Ni-Cr Filler Alloy
View through CrossRef
An experimental study on induction brazing diamond grinding wheel with Ni-Cr filler
alloy was carried out. Brazing trial was conducted at the temperature range of 1020-1080 oC and the
brazing time were 10, 20, 30 and 40 seconds in a flowing argon environment with a flow rate of
5000cm3/min. The scanning electron microscopic (SEM) results indicate that good wetting existed
between the brazing alloy and diamond. The element distribution of C, Cr, Si and Ni were examined
by energy dispersive spectrometer (EDS), the results demonstrated an intermediate layer rich in the
chromium formed between the filler metal and diamond. Kinds of compounds formed in the interface
were detected by means of x-ray diffraction (XRD), and the graphitization of the brazed diamond grits
was determined by Raman spectroscopy. The monolayer induction brazing diamond grinding wheels
were used in grinding of nature granite, experimental results show that induction brazing wheels
performed better than vacuum brazing diamond wheels, and no pullout of diamond grits or peeling of
the filler metal layer took place.
Trans Tech Publications, Ltd.
Title: Induction Brazing Diamond Grinding Wheel with Ni-Cr Filler Alloy
Description:
An experimental study on induction brazing diamond grinding wheel with Ni-Cr filler
alloy was carried out.
Brazing trial was conducted at the temperature range of 1020-1080 oC and the
brazing time were 10, 20, 30 and 40 seconds in a flowing argon environment with a flow rate of
5000cm3/min.
The scanning electron microscopic (SEM) results indicate that good wetting existed
between the brazing alloy and diamond.
The element distribution of C, Cr, Si and Ni were examined
by energy dispersive spectrometer (EDS), the results demonstrated an intermediate layer rich in the
chromium formed between the filler metal and diamond.
Kinds of compounds formed in the interface
were detected by means of x-ray diffraction (XRD), and the graphitization of the brazed diamond grits
was determined by Raman spectroscopy.
The monolayer induction brazing diamond grinding wheels
were used in grinding of nature granite, experimental results show that induction brazing wheels
performed better than vacuum brazing diamond wheels, and no pullout of diamond grits or peeling of
the filler metal layer took place.
Related Results
Towards a Better Understanding of the Rail Grinding Mechanism
Towards a Better Understanding of the Rail Grinding Mechanism
Rail grinding continues to be one of the most effective techniques for extending rail life, improving wheel/rail contact behavior, and reducing the overall cost of track maintenanc...
Hot-filament Chemical Vapour Deposition of Microcrystalline Diamond Layers for Grinding Applications
Hot-filament Chemical Vapour Deposition of Microcrystalline Diamond Layers for Grinding Applications
Rough, microcrystalline CVD diamond layers are under research for many years for grinding applications. This contribution will present an overview about the results, both for film ...
Theoretical modeling and experimental study on grinding force of straight groove structured grinding wheel
Theoretical modeling and experimental study on grinding force of straight groove structured grinding wheel
Abstract
Structured grinding wheel has obvious advantages in reducing grinding force, and the structural parameters of grinding wheel have important influence on the reduct...
Investigation of the effect of wheel grooves on surface grinding performance in EN18 Steel
Investigation of the effect of wheel grooves on surface grinding performance in EN18 Steel
Abstract
The grooved grinding wheels are utilized to enhance the coolant supply to the grinding zone and reduce the heat throughout grinding, thus making the grinding perfo...
Polishing Performance of a Recycled Grinding Wheel Using Grinding Wheel Scraps for the Wet Polishing of Stainless-Steel Sheets
Polishing Performance of a Recycled Grinding Wheel Using Grinding Wheel Scraps for the Wet Polishing of Stainless-Steel Sheets
The surfaces of large austenitic stainless-steel sheets, which have side lengths of at least 1 m a sheet thickness of at least 6 mm, used for food tanks and sliding plates in seism...
Research on modeling of grinding force in Longitudinal ultrasonic
vibration–assisted grinding of alumina ceramics
Research on modeling of grinding force in Longitudinal ultrasonic
vibration–assisted grinding of alumina ceramics
Abstract
A longitudinal ultrasound-assisted grinding (LUVAG) alumina ceramics grinding force model and an LUVAG end grinding force model were developed in order to examine ...
Grinding Performance Integrated Experimental Evaluation on Alumina Ceramics with Leaf-Vein Bionic Grinding Wheel
Grinding Performance Integrated Experimental Evaluation on Alumina Ceramics with Leaf-Vein Bionic Grinding Wheel
Abstract
In order to enhance the grinding performance of alumina ceramic materials, the surface of the grinding wheels are ablated by laser radiation before grinding, and t...