Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Research on a New Inverter Control Strategy of Induction Heating Power Supply

View through CrossRef
To achieve “high voltage, low current” in the induction heating power circuit, enhance the flexibility of component selection in the circuit, and improve the quality of the inverter’s output waveform, a new control strategy of a single-phase NPC three-level inverter with unipolar frequency-doubling SPWM method is proposed. With the series connection of IGBTs in a single-phase NPC three-level inverter, the voltage withstand requirement of IGBT is reduced by half. The middle four IGBTs are controlled using unipolar frequency-doubling SPWM, while the outer four IGBTs are turned on later and turned off earlier to address the neutral point voltage imbalance issue in the inverter. Simulation results show that, compared with the traditional bipolar SPWM-controlled single-phase full-bridge inverter, the DC-side input voltage of the inverter can be double, and the current flowing through the entire circuit can be halved under the same output power using the proposed method.
Title: Research on a New Inverter Control Strategy of Induction Heating Power Supply
Description:
To achieve “high voltage, low current” in the induction heating power circuit, enhance the flexibility of component selection in the circuit, and improve the quality of the inverter’s output waveform, a new control strategy of a single-phase NPC three-level inverter with unipolar frequency-doubling SPWM method is proposed.
With the series connection of IGBTs in a single-phase NPC three-level inverter, the voltage withstand requirement of IGBT is reduced by half.
The middle four IGBTs are controlled using unipolar frequency-doubling SPWM, while the outer four IGBTs are turned on later and turned off earlier to address the neutral point voltage imbalance issue in the inverter.
Simulation results show that, compared with the traditional bipolar SPWM-controlled single-phase full-bridge inverter, the DC-side input voltage of the inverter can be double, and the current flowing through the entire circuit can be halved under the same output power using the proposed method.

Related Results

Control contributions to AC microgrid inverters
Control contributions to AC microgrid inverters
This thesis is focused on the microgrid control framework. Specifically, it is concentrated on alternative current microgrids. As a result of the author involvement in different in...
Sliding Mode Controlled drives for wide speed operation of Threephase Induction Motor
Sliding Mode Controlled drives for wide speed operation of Threephase Induction Motor
Induction motor is widely used due to advantages in terms of performance, size, maintenance and efficiency compared to dc motor. Induction motor is either Scalar Controlled or Vect...
Analisis Perbandingan Efisiensi Daya Modified Sine Inverter Dengan Pure Sine Inverter
Analisis Perbandingan Efisiensi Daya Modified Sine Inverter Dengan Pure Sine Inverter
Penyimpangan daya seperti adanya gangguan listrik dapat menyebabkan dampak yang parah pada beban yang sensitif atau penting dalam sistem kelistrikan, sehingga dibutuhkan peralatan ...
Huai-River policy and regional economic development: status and prospect
Huai-River policy and regional economic development: status and prospect
This study explores the impact of the Huai River policy on human and economic activities. First, we study the impact of central heating policy on air quality. Second, the impact of...
Real-time Analysis of Inverter Performance via SCADA Haiwell Online Monitoring
Real-time Analysis of Inverter Performance via SCADA Haiwell Online Monitoring
An inverter is the main component of an on-grid solar system. It converts DC power from solar PV to AC power to serve the electric load. Besides, it is used to find the maximum pow...
PMSG Wind Energy Conversion Systems ZSI
PMSG Wind Energy Conversion Systems ZSI
Abstract: Recently Permanent Magnet Synchronous Generator are mostly used in the Wind Energy Conversion System applications This work is clearly deal with the study of Wind Energy ...
Nonlinear optimal control for robotic exoskeletons with electropneumatic actuators
Nonlinear optimal control for robotic exoskeletons with electropneumatic actuators
Purpose To provide high torques needed to move a robot’s links, electric actuators are followed by a transmission system with a high transmission rate. For instance, gear ratios of...

Back to Top